Download MA6440 - Kollmorgen

P (Store Parameters)
P
Immediate
Purpose
Stores parameters to non-volatile memory. Values are restored to
working memory upon power-up and by issuing the A0 command.
Syntax
P
Arguments
none
Programming
guidelines
Type P <Enter>. All parameters and fast memory locations
128-191 will be saved to non-volatile memory in addition to the
following parameters:
Initial Velocity (F)
Final Velocity (V)
Ramp slope (M)
Jog Speed (^)
Trip Point (O)
Resolution Mode
Limit Switch Polarity
RS-485 Node Address
User Programs
The default mode after memory initialization is Variable
Resolution Mode at Full Speed.
Note: Whenever a change in any of these parameters or code in
Fast RAM locations 128-191 is to be saved during power cycling,
the P command must be executed.
6440 User Manual - Rev 2
MA6440
7 - 21