Download Installation and Administration Manual

AutoVue
75
Calibrate
Specify 2D mode measurement units.
[Calibrate]
Parameter
Description
Default
DISTANCEUNI
TS =
[0|1|2|4|5|7|8|9|1
0|11|12|13|14|15
]
Specifies the default units for 2D Markup mode measurements. Distance units values:
0 - Pixels
1 - Inches
2 - Millimeters
4 - Twips
5 - Centimeters
7 - Meters
8 - Kilometers
9 - Feet
10 - Yards
11 - Miles
12 - Thousandth of an inch (mils)
13 - Ten Thousandth of an inch (mils/10)
14 - Microns
15 - Microinches
1
AREAUNITS =
[0|1|2|4|5|7|8|9|1
0|11|12|13|14|15
]
Specifies the default units for 2D Markup mode area measurements. Area units values:
0 - Pixels sq.
1 - Inches sq.
2 - Millimeters sq.
4 - Twips sq.
5 - Centimeters sq.
7 - Meters sq.
8 - Kilometers sq.
9 - Feet sq.
10 - Yards sq.
11 - Miles sq.
12 - Thousandth of an inch (mils sq.)
13 - Ten Thousandth of an inch (mils sq./
100)
14 - Microns sq.
15 - Microinches sq.
1
Markup Font Options
[MrkFont]
Parameter
Description
Default
FACE
Specifies the text entity font name.
Arial
SIZE
Specifies the text entity font size.
10
ISBOLD
Set to 1 so that the text entity font appears in bold.
0
ISSTRIKEOUT
Set to 1 so that the text entity contains a strikethrough.
0
ISUNDERLINE
Set to 1 so that the text entity is underlined.
0
ISITALIC
Set to 1 so that the text entity appears in italic.
0