Download ESU LT User Manual

Chapter 5
Configuration Men
CONFIG
The CONFIGURATION MENU is used to set the ESU LT
operational configuration, including all of the network
interface parameters, and the allocation of the time slots and
the port parameters. See Figure 5-1.
1) INTERFACE
2) FRAMING
1) NETWORK (NI)
3) LINE CODE
4) CRC-4
5) NFAS WORD
6) RFA GEN
7) TIMING MODE
1) POSITION
2) MODEM INIT
1) CONTROL PORT
3) DATA RATE
2) UNIT
2) ALARMS
2) CONFIG
1) TRAPS
2) OUTPUT
3) TEL NUM
1) INTERFACE
2) TS0 RATE
3) MAPPING
4) DTE TX CLOCK
3) PORT
5) START TS0
6) # OF TSOs
7) DATA
8) CTS
9) DCD
10) DSR
11) INBAND
Figure 5-1. Configuration Menu
61200410L1-1
ESU LT User Manual
5-1