1
Download ZM-71SE Instruction Manual (Function version)
Transcript
Chapter 2 Overlap Overlap Display Formats There are four display formats for overlap areas that belong to the property. Overlap Normal overlap area (Refer to page 2-6.) Multi-overlap area (Refer to page 2-10.) Call-overlap area (Refer to page 2-16.) Video input (Refer to page 2-22.) Normal Overlap When an overlap is to be displayed on one specific screen, it is called “normal overlap.” Use one of the three overlap areas (layers) on the screen, as a normal overlap area. A maximum of three sheets of normal overlap can be used on a screen. Screen Layers Overlap 0 (normal) Overlap 2 Overlap 1 Change Screen A-Line B-Line C-Line Num. Display Error Detail Alarm Display When registering an overlap as [Normal] in the overlap 0 area, normal overlap is called up. Multi-overlap [Multi-overlap] is set when multiple overlap screens are displayed on the screen, or when more than three overlaps are displayed on the screen. Multi-overlap Edit Change Screen A-Line Num. Display B-Line Monitor C-Line Error Detail Contents D-Line Alarm Display Setting Change UP DW Graph Display ........................ 2 Num. Data Display ................. 3 Alarm Display ......................... 4 Setting Change ................ 5 - 7 Production Process List ... 8 - 9 Troubleshooting ................ 10 999 Max.: 000 Min.: Entered: 000 Setting data 1 000 7 8 9 DW Setting data 2 000 4 5 6 Setting data 3 000 1 2 3 CL Setting data 4 000 0 +/- . CR A-Line Paint Process UP Change Screen Coating Machine Count (times): 000,000 Timer (sec): 00 sec. Error 2-4 Screen Troubleshooter Contents Details Location
