Download ProSYS User`s Manual

Customer Information
RTTE COMPLIANCE STATEMENT
Hereby, Rokonet Electronics Ltd, declares that this control panel
(RP128MC0000A, RP140MC0000A, RP116MC0000A), with
wired accessories (including cables) and wireless accessories, is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
TELEPHONE CONNECTION (Ref.: FCC Part 68)
1) This equipment, Alarm Control Panel, brand named ProSYS
(RP128MA0000A, RP140MA0000A, RP116MA0000A),
complies with Part 68 of the FCC Rules and the requirements
adopted by the ACTA. On the bottom panel of this equipment
is a label, that contains among other information, a product
identifier in the format US:RKEAL10BRP1XXMA. If requested,
this number must be provided to the telephone company.
2) This equipment is designed to be connected to the telephone
network using a terminal block which is Part 68 compliant
and properly installed RJ31X connector. See Installation
Instructions for details.
3) The REN is used to determine the number of devices that may
be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in
response to an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone
company. The REN of alarm system is part of the product
identifier that has the format US:RKEAL10BRP1XXMA.
4) If the Alarm Control Panel causes harm to the telephone
network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. If
advance notice is not practical, you will be notified as soon as
possible. Also, you will be advised of your right to file a
compliant with the FCC if it is necessary.
ProSYS User’s Manual
3