Download CNC 8025 T, TS - Fagor Automation

Jumps/calls within a program
Functions G25,G26,G27,G28 and G29 can be used to jump to another block of the current
program.
No more information can be programmed into the same block in which some of the
functions G25,G26,G27,G28 or G29 are programmed.
There are two formats:
Format a) JUMP:
N4 (G25,G26,G27,G28,G29) N4
N4 : Block number
G25,G26,G27,G28,G29 : Codes for different jumps
N4 : Number of the block the jump is aimed at
When the CNC reads this block it jumps to the targeted block and the program continues.
Example:
N0 G00 X100
N5 Y50
N10 G25 N50
N15 X50
N20 Y70
N50 G01 X20
When the block 10 is reached, the CNC jumps to block 50 and then the program continues
until it is finished.
8025/8030 CNC PROGRAMMING MANUAL
147