Download Startup & Maintenance Guide

3-3 Using the Handy Panel
Display screen
Menus, messages, and the like are displayed here.
Dial
This adjusts the spindle’s speed of rotation.
Indication used in this manual:
F P. 67, "Adjusting the Spindle Speed"
MENU Button
Pressing this changes the menu screen. Also,
pressing this when at the origin-setting menu
returns the screen to the coordinate display
view (the main menu).
Indication used in this manual:
Copy button
This calls up the menu for the copy feature.
Indication used in this manual:
F EGX-360 Engraving Guide
Enter/Pause button
This executes a selected on-screen item or
confirms a selected item or value. Confirming
an item or value displays the setting enclosed
between angled brackets ("<>"). Pressing
this during engraving pauses operation and
displays the Pause menu.
Indication used in this manual:
Spindle button
Holding this down for one second or longer
while the spindle is stopped makes spindle
rotation start. Pressing this during spindle rotation makes the rotation stop. (When rotation
is stopped, holding the button down for one
second or longer is not necessary.)
Indication used in this manual:
F P. 66, "Starting and Stopping Spindle Rotation"
XY/XA-axis Origin Set button
This sets the reference point for the cutting
position. This sets the X- and Y-axis origin point
for flat engraving and the X- and A-axis origin
point for cylindrical engraving.
Indication used in this manual:
F EGX-360 Engraving Guide
Z-axis Origin Set button
This sets the reference point for the cutting
position.
Indication used in this manual:
F EGX-360 Engraving Guide
58
Chapter 3 Basic Operation
Movement buttons
These move the cutter forward and backward, and
to the left and right. You also use them to select
items and change settings at menu screens.
Indication used in this manual:
F P. 62, "Manual Movement"
Z-axis Movement buttons
These move the cutter up and down.
Indication used in this manual:
F P. 62, "Manual Movement"
Feed button
Pressing a Movement or Z-axis Movement
button while holding down this button makes
the cutter move rapidly.
Indication used in this manual:
F P. 62, "Manual Movement"