Download User`s Guide Part I

LIMIT SRC
Define limit source
Format:
Group:
Units:
LIMIT index SRC sourcedef
Global Objects
none
See also:
SRC
This command sets the input source for a limiter. The default limiter source is NONE.
See the SRC command for the definition of the "sourcedef" argument.
The following example sets the source of LIMIT0 to RATCH2:
Usage example:
LIMIT0 SRC RATCH2
LIMIT FREQ
Define frequency limit
Format:
Group:
Units:
LIMIT index FREQ frequency
Global Objects
pulses / second
This command sets the limiter “frequency”. The limiter “frequency” sets the maximum
frequency allowed to pass through the limiter. The limiter “frequency” times the limiter
“width” determine the maximum pulses per frame.
Setting limiter “frequency” to zero tuns off the limiter’s frame clipping and all pulses
accumulated in the previous frame are redistributed over the next frame.
The “frequency” argument is a 32-bit floating point. Issuing a LIMIT FREQ command
without an argument will display the current setting. The default frequency limit is zero.
The following example sets the frequency limit of LIMIT1 to 10000 pulses / second:
Usage example:
LIMIT1 FREQ 10000
Chapter 3, Command Reference
227