Download Multiple Channel DVR

Move the cursor to over the Set Date/Time in the Date/Time menu, and then press ENTER
to display the submenu (as shown below) on the screen.
To change the date and time settings follows below steps:
STEP 1: Enter the Date/Time menu, select <Set Date/Time>, and press ENTER.
STEP 2: To enter the desired date and time, select the wanted using the UP / DOWN
Direction buttons; then adjust the value using the LEFT / RIGHT Direction
buttons.
STEP 3: Select <Update Now> after the adjustment is done.
STEP 4: The unit uses the new date and time setting after the unit is restarted. The
Date and Time you set are always displayed in the lower left corner of the
main screen.
Please note that the reset date and time will be used by the unit to record new video; the
date and time of previously recorded video that is stored in database won’t be changed.
NOTE: To avoid record database corruption, after changed Date/Time setting, format HDD
is highly recommended. See appendix: HDD Formatting Duration for further information.
7.1.2 Date Display Mode
This function allows you to set the OSD display type of the date / time. There are three
options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>. “Y” represents “Year”, “M”
represents “Month” and “D” represents “Day”.
Use the LEFT / RIGHT keys to change the setting. The default setting is <M/D/Y> in both
NTSC / PAL formats.
00-370160D1EA3
44