1
Download USER`S MANUAL (Preliminary)
Transcript
KORTEK CORPORATION KORTEK USER’S MANUAL (Preliminary) KT-LS17E4/STD XGA TFT LCD Analog-Digital Conversion Board MAY. 2000 KORTEK CORPORATION 328-5 Songnae-1 Dong Sosa-Gu,Puchon-Si, Kyunggi-Do, Korea 422-042 Tel (82)-32-667-3711 Fax (82)-32-665-0297 KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 1 KORTEK CORPORATION Table Of Contents Reference 1. KT-LS17E4/STD KEYPAD OPERATION 1. OSD Menu Procedure Map ---------------------------------------------------------------------------------------2. Keypad Usage 2-1. OSD Board Description ------------------------------------------------------------------------------------2-2. LED Function ------------------------------------------------------------------------------------------------3. OSD Function ------------------------------------------------------------------------------------------------------- 3 4 4 4 Reference 2. KT-LS17E4/STD A/D BOARD SPECIFICATION Cover ------------------------------------------------------------------------------------------------------------------Revision Record -----------------------------------------------------------------------------------------------------1. General Description -----------------------------------------------------------------------------------------------2. Electrical Specification --------------------------------------------------------------------------------------------3. Signal Timing & Wave form 3-1. At DE Only mode --------------------------------------------------------------------------------------------3-2. At H-Sync, V-Sync, DE mode -----------------------------------------------------------------------------3-3. Timing Specification(Application model : LG LM181E1) --------------------------------------------4. Power Sequence(Supply for LCD) -----------------------------------------------------------------------------5. Interface Connections 5-1. Output Pin Config --------------------------------------------------------------------------------------------5-2. Keypad Pin Config -------------------------------------------------------------------------------------------5-3. Power Output Config for LCD ----------------------------------------------------------------------------5-4. Dummy Pin Config for other Applications -------------------------------------------------------------5-5. Inverter Pin Config(BACKLIGHT) ----------------------------------------------------------------------5-6. Power Input Config -----------------------------------------------------------------------------------------5-7. DEBUG Pin Config-----------------------------------------------------------------------------------------5-8. LVDS 2CHANNEL OUTPUT INTERFACE --------------------------------------------------------5-9. PANEL LINE OUTPUT INTERFACE --------------------------------------------------------------6. Mechanical Characteristics(Top View) ------------------------------------------------------------------------- KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 9 10 11 13 14 15 16 17 18 19 19 19 20 20 20 21 22 23 2 KORTEK CORPORATION 1. OSD Menu Procedure Map BRIGHTNESS & CONTRAST COLOR TEMPERATURE COLOR TEMPERATURE ADJUST POSITION ZOOM HUE & SATURATION LANGUAGE SOURCE VIDEO SCALING 4 : 3 DISPLAY MODES 16 : 9 DISPLAY MODES UTILITIES USER SETTINGS FREEZE FRAME GAMMA ADJUST TEST PATTERN RESET TO FACTORY DEFAULTS AUTO ADJUST EXIT KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 3 KORTEK CORPORATION 2. Keypad Usage 2-1. OSD Board Description Menu POWER UP(-) LED POWER MENU UP(UP(-) DOWN(+) SOURCE AUTOADJUST DOWN(+) SOURCE Autoadjust LCD monitor power on/off Select MainMenu/SubMenu Move Prev Item/Decrease the value Move Next Item/ / Increase the value Select Source Menu Press (+) and (-)key at the same time 2-2. LED Function DPMS ON DPMS STANDBY DPMS SUSPEND DPMS OFF GREEN RED RED RED 3. OSD Function Description •BRIGHTNESS & CONTRAST - MENU - UP(-) - DOWN(+) KORTEK : Enter Sub Menu : Select Prev Menu(Exit) : Select Next Menu(Color Temperature) KORTEK TFT-LCD MONITOR & BOARD SOLUTION •BRIGHTNESS & CONTRAST - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up/Decrease the value : Cursor Down/Increase the value SXGA Analog-Digital Conversion Board 4 KORTEK CORPORATION •COLOR TEMPERATURE - MENU - UP(-) - DOWN(+) : Enter Sub Menu : Select Prev Menu(Brightness&Contrast) : Select Next Menu(Position) •COLOR TEMPERATURE - MENU - UP(-) - DOWN(+) •POSITION - MENU - UP(-) - DOWN(+) : Enter Sub Menu : Select Prev Menu(Color Temperature) : Select Next Menu(Zoom) •ZOOM - MENU - UP(-) - DOWN(+) KORTEK :Set Current Menu : Cursor Up/Decrease the value : Cursor Down/Increase the value •POSITION - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up/Decrease the value : Cursor Down/Increase the value •ZOOM : Enter Sub Menu : Select Prev Menu(Position) : Select Next Menu(Hue&Saturation) KORTEK TFT-LCD MONITOR & BOARD SOLUTION - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up/Decrease the value : Cursor Down/Increase the value SXGA Analog-Digital Conversion Board 5 KORTEK CORPORATION •HUE & SATURATION - MENU - UP(-) - DOWN(+) : Enter Sub Menu : Select Prev. Menu(Zoom) : Select Next Menu(Language) •LANGUAGE - MENU - UP(-) - DOWN(+) : Enter Sub Menu : Select Prev Menu(Hue&Saturation) : Select Next Menu(Source) KORTEK - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up/Decrease the value : Cursor Down/Increase the value •LANGUAGE - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up : Cursor Down •SOURCE •SOURCE - MENU - UP(-) - DOWN(+) •HUE & SATURATION : Enter Sub Menu : Select Prev Menu(Language) : Select Next Menu(Video Scaling) KORTEK TFT-LCD MONITOR & BOARD SOLUTION - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up : Cursor Down SXGA Analog-Digital Conversion Board 6 KORTEK CORPORATION •VIDEO SCALING - MENU - UP(-) - DOWN(+) : Enter Sub Menu : Select Prev. Menu(Source) : Select Next Menu(Utilities) •VIDEO SCALING - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up : Cursor Down •UTILITIES - MENU - UP(-) - DOWN(+) KORTEK : Enter Sub Menu : Select Prev Menu(Video Scaling) : Select Next Menu(Exit) KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 7 KORTEK CORPORATION •UTILITIES - MENU - UP(-) - DOWN(+) :Set Current Menu : Cursor Up/Decrease the value : Cursor Down/Increase the value •EXIT - MENU - UP(-) - DOWN(+) KORTEK : Exit the Menu : Select Prev. Menu(Utilities) : Select Next Menu(Brightness&Contrast) KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 8 KORTEK CORPORATION KORTEK KT-LS17E4/SDT VIDIO BOARD SPECIFICATION MAY. 2000 KORTEK CORPORATION 328-5Songnae-1 Dong, Sosa-Gu,Puchon-Si, Kyunggi-Do,Korea 422-042 Tel (82)-32-667-3711 Fax (82)-32-665-0297 KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 9 KORTEK CORPORATION * Revision Record DATE MAY 00 KORTEK Rev No 1.0 CONTENTS Notes First Preliminary Version. KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 10 KORTEK CORPORATION 1.General Description 1) DPMS for monitor power management support 2) DDC(Display Data Channel)1/2B support : VESA EDID Standard 3) VIDEO SUPPPORT (Composite, S-VHS MODE). (1) NTSC 60Hz. (2) PAL 50Hz. (3) SECAM 50Hz. 4) Etc Characteristics. (1) Zoom function. (2) More Graphical OSD support. (3) Remote Controller support. (4) Scaling function Note : Refer to ‘KT-LS17E4/STD AD Board Block Diagram’ on next page. KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 11 KORTEK CORPORATION ODD VIDEO DATA KS0127 EVEN VIDEO DATA VIDEO DECODER POWER & CONTROL SIGNAL VIDEO INPUT SIGNAL FIG-1) KT-LS-17E4/STD BLOCK DIAGRAM Video Input S-VHS TV Input Input <Cable Connections> KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 12 KORTEK CORPORATION 2.Electrical Specifications 2-1 Maximum Ratings The followings are maximum values which, if exceeded, may cause faulty operation or damage to A/D Board unit. Parameter Symbol Values MIN MAX Units Conditions Power Input Voltage IVAA 0 +14 Operating Temperature TOP 0 +50 VDC At 25 25 Storage Temperature TST -20 +60 1 Notes Mate-connector 1)DC-JACK. 2) Molex 5474NA – 2pin Note : 1. The Relative Humidity must not exceed 95% non-condensing at temperatures of 40 At temperatures greater than 40 , the wet bulb temperature must not exceed 39 . 2. Mate Connector is selectable between DC-JACK and 5474NA-2pin. or less 2-2 Electrical Specifications PART POWER INPUT PARAMETER SYMBOL Power Supply Input Voltage KORTEK UNITS TYP MAX IVAA 11 12 13.2 Power Supply Input Current IIVAA TBD TBD TBD A Power Supply Input Voltage Ripple IVRAA 300 mV PP POWER Consumption POWER OUTPUT VALUES MIN TBD TBD VDC TBD +5V Output Voltage OV5 4.5 5 5.5 VDC +3.3 Output Voltage OV3.3 3 3.3 3.6 VDC +12V Output Voltage OV12 10.8 12 13.2 VDC KORTEK TFT-LCD MONITOR & BOARD SOLUTION NOTES SXGA Analog-Digital Conversion Board 13 KORTEK CORPORATION 3. Signal Timing & Wave form 3-1. At DE Only mode TV TV D DE TH DCLK T HD DE DATA SIGNALS Valid display data(640 clocks ) TC T CH T CL 2.64V DCLK 50% 50% 50% 0.66V 2pixels per 1cock T DS T DH DISPLAY 2.64V 0.66V DATA T ES 2.64V INTERFACE TIMING (application model : SAMSUNG LT170E4-L01 ) DE SIGNAL CLOCK DATA DATA ENABLE VERTICAL ACTIVE LINE ONE LINE SCANNING TIME FRAME FREQUENCY HORIZONTAL ACTIVE TIME KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION ITEM Frequency High time Low time Setup Time Hold Time Setup Time SYMBOL 1/Tc TCH TCL TDS TDH T ES MIN Cycle TV 1028 Display Period TVD 1024 Cycle TH 656 Display Period THD 640 TYP MAX 54 UNIT MHz nsec nsec nsec nsec nsec 1066 lines 1024 lines 844 clocks 640 clocks 5 5 4 4 4 1024 640 SXGA Analog-Digital Conversion Board 14 KORTEK CORPORATION 3-2. at Hsync,Vsync,DE mode tC L tW K Main Clock t WCL CH 0.7Vcc 0.5Vcc 0.5Vcc 0.9Vcc 0.2Vcc tf C L trCL K K 0.9Vcc 0.9Vcc t Hf, Hsync, Vsync, t Vf Data, Data Enable t Hr, t Vr 0.9Vcc 0.2Vcc tS tH D 0.1Vcc 0.1Vcc 0.1Vcc0 .1Vcc 0.1Vcc D Data (FR,SR FG,SG FB,SB) Invalid Data tH Invalid Data 0.7Vcc tS I I DataEnable 0.2Vcc 0.7Vcc Main Clock tH C HSync 0.2Vcc tH VSync V 0.2Vcc tH P HSync tW 0.7Vcc H 0.2Vcc 0.2Vcc 0.2Vcc DataEnable tH B tHF P P 0.2Vcc tV P VSync 0.7Vcc tW V 0.2Vcc 0.2Vcc 0.2Vcc tV B tHF P P DataEnable KORTEK 0.7Vcc KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 15 KORTEK CORPORATION 3-3. Timing Spec (Application model : LG LM181E1) SIGNAL CLOCK DATA Hsync Vsync ITEM Frequency SYMBOL Tclk H igh Time TWCH Low Time TWCL R ise tim e Fall tim e Setup Time Hold Time R ise Tim e Fall Time Period Pulse Width R ise/Fall Tim e Period Pulse Width R ise/Fall Tim e Hsync-Clock phase difference Vsync-Clock phase difference KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION TYP 54 0.5T clk 0.5T clk 844 56 MAX 54 0.6Tcl k 0.6Tcl k 2.3 1.4 4.5 2.1 - U N IT MHz T rclk T fclk TSD THD TDr TDf THP TWH M IN 54 0.4T clk 0.4T clk 5.0 5.0 680 8 T H r ,T H f - - 5 ns TVP 1032 1066 - lines TWV 2 3 - lines T v r ,T v f - - 10 ns THC Tclk10 - TWCL ns THV - - THPTWH ns ns ns ns ns ns ns ns ns clock clock SXGA Analog-Digital Conversion Board 16 KORTEK CORPORATION 4. Power Sequence (Supply for LCD) 90% Power Supply For IV AA 90% T2 10% 10% 0V T5 T1 T6 Input Signal For VI T3 0V T4 CCFL Power Supply For V lamp 0V 0 T1 1 0 msec 0 T2 5 0 msec 0 0 T5 5 0 msec 10ns 0 T3 T5 5 0 msec 5 0 msec T6 2 0 msec * This timing sequence is kept when the A/D Board is turned on or turned off. KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 17 KORTEK CORPORATION 5. Interface Connections. 5-1.Output Pin Config Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 S ymbol SCL SDT RESERVE RESERVE A2P A2M GND GND A1P A1M RESERVE RESERVE +5V(Not Use) GND A0P A1P GND GND ACP ACM NC Position No : J5 JAE 21PIN (LVDS 2CH) MODEL NO: F1-WE2PB-HF Mate Connector : FI-WE21S Pin No 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Symbol NC GND GND RXCRXC+ GND GND RX0RX0+ GND GND RX1RX1+ GND GND RX2RX2+ GND GND NC NC SDA (Not Use) SCL(Not Use) VCLK(Not Use) FRC (Not Use) VDD VDD VDD VDD VDD VDD Position No : J12 JAE 31PIN(SiI150) MODEL NO: F1-WE21PB-HF Mate Connector : FI-WE31S KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 18 KORTEK CORPORATION 5-2.Keypad Pin Config Pin No 1 2 3 4 5 6 7 8 9 10 11 12 Symbol MENUSEL M E N U E X IT DOWN UP SOURCESEL 3.3V LED GREEN LED RED GND GND POWER_SW1 POWER_SW2 Position No : J10 Molex 12 Pin(OSD) MODEL NO: 53015-1210 Mate Connector : 5-3. Power Output Config For LCD Pin No 1 2 3 4 5 Symbol GND GND VCC1( 3.3V, 5V,12V SELECT) VCC1( 3.3V ,5V,12V SELECT) GND Position No : J6 Molex 5 Pin(LCD POWER) MODEL NO: 53015-0510 Mate Connector : 5-4. Dummy Pin Config For other Applications P in No 1 2 3 4 5 6 7 8 KORTEK Symbol VCC1( 5V,12V SELECT) VCC1( 5V,12V SELECT) DUMMY PORT SDA SCL 3.3V GND GND KORTEK TFT-LCD MONITOR & BOARD SOLUTION Position No : J8 Molex 8 Pin(LCD POWER) MODEL NO: 53015-0810 Mate Connector : SXGA Analog-Digital Conversion Board 19 KORTEK CORPORATION 5-5. Inverter Pin Config(BACK LIGHT) Pin No 1 2 3 4 5 6 7 8 Symbol 12V 12V GND CONTROL BRIGHTNESS GND ENABL BACKLIGHT GND VCC(3.3V OR 5V SELECT) Position No : J11 Molex 8 Pin(INVERTER) MODEL NO: 53015-0810 Mate Connector : 5-6. Power Input Pin Config Pin No 1 2 3 Symbol 12V GND GND Position No : J14 DC-JACK(POWER IN) MODEL NO: 53015-0810 Mate Connector : Symbol 12V GND Position No : CON2 Molex 2Pin (POWER IN) MODEL NO: 5474NA Mate Connector : (OPTIONNAL) Pin No 1 2 5-7. DEBUG Pin Config P in No 1 2 3 4 5 KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION Symbol TXD GND RXD VCC N.C Position No : J11 Molex 5 Pin(INVERTER) MODEL NO: 53015-0510 Mate Connector : SXGA Analog-Digital Conversion Board 20 KORTEK CORPORATION 5-8. LVDS 2CHANNEL OUTPUT INTERFACE TxO3 TxO3* TxOCK DSC090C383A PW164R 51 51 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 DRO0 DRO1 DRO2 DRO3 DRO4 DRO5 DRO6 DRO7 DGO0 DGO1 DGO2 DGO3 DGO4 DGO5 DGO6 DGO7 DBO0 DBO1 DBO2 DBO3 DBO4 DBO5 DBO6 DBO7 DSC090C383A 51 51 54 55 56 3 50 2 4 6 7 11 12 14 8 10 15 19 20 22 23 24 16 18 DRE0 DRE1 DRE2 DRE3 DRE4 DRE5 DRE6 DRE7 DGE0 DGE1 DGE2 DGE3 DGE4 DGE5 DGE6 DGE7 DBE0 DBE1 DBE2 DBE3 DBE4 DBE5 DBE6 DBE7 TxOCK* TxO2 TxO2* TxO1 TxO1* TxO0 TxO0* TxE3 TxE3* TxECK (ODD DATA) (EVEN DATA) TxECK* TxE2 TxE2* TxE1 TxE1* TxE0 TxE0* A/D BOARD KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 21 KORTEK CORPORATION 5-9 PANEL LINK OUTPUT INTERFACE SiI 151 PW164R 97 DRE0 DRO0 55 96 DRE1 DRO1 54 95 DRE2 DRO2 53 94 DRE3 DRO3 52 93 DRE4 DRO4 51 92 DRE5 DRO5 50 91 DRE6 DRO6 49 90 DRE7 DRO7 48 6 DGE0 DGO0 65 5 DGE1 DGO1 64 4 DGE2 DGO2 63 3 DGE3 DGO3 62 2 DGE4 DGO4 61 1 DGE5 DGO5 60 100 DGE6 DGO6 59 99 DGE7 DGO7 58 16 DBE0 DBO0 75 15 DBE1 DBO1 74 14 DBE2 DBO2 73 13 DBE3 DBO3 72 12 DBE4 DBO4 71 11 DBE5 DBO5 70 10 DBE6 DBO6 69 9 DBE7 DBO7 68 A2P A2M A1P A1M A0P A0M ACP ACM A/D BOARD KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 22 KORTEK CORPORATION 6. Mechanical Characteristics (Top view) KORTEK KORTEK TFT-LCD MONITOR & BOARD SOLUTION SXGA Analog-Digital Conversion Board 23
