Download Getting Started with Stellaris ARM Cortex-M
Transcript
vi Contents 3.4 3.3.1 Power Supply 3.3.2 Microcontroller Connections 3.3.3 JTAG Interface 3.3.4 Arduino Interface Connector 3.3.5 USB Virtual COM Port 3.3.6 Audio Input 3.3.7 Light Sensor 3.3.8 LEDs and Switches 3.3.9 Temperature Sensor and Thumbwheel Potentiometer Input Guru’s Arduino Interface in Detail ® 22 24 25 26 28 28 28 30 31 31 4 GNU ARM Toolchain 4.1 Introduction 4.2 Programming Environment: Stellaris® Guru 4.3 Setting up the Development Environment 33 33 36 38 5 Anatomy of a C Program 5.1 Example 5.2 Experiment 1 5.2.1 Objective 5.2.2 Program Flow 5.2.3 Register Accesses 5.2.4 Program Code 5.3 Experiment 2 5.3.1 Objective 5.3.2 Program Flow 5.3.3 Register Accesses 5.3.4 Program Code 56 57 57 57 57 59 60 61 61 61 63 63 6 StellarisWare API 6.1 StellarisWare Peripheral Driver Library: A Layer of Abstraction 6.2 Features of the StellarisWare Peripheral Driver Library 6.3 Programming Models 6.3.1 Direct Register Access Model 6.3.2 Software Driver Model 6.3.3 Using Both Models 6.4 Useful StellarisWare API Function Calls 6.4.1 SysCtlClockSet 6.4.2 SysCtlClockGet 6.4.3 SysCtlPeripheralEnable 65 65 66 66 66 67 67 67 67 69 69