Download user manual v5

Transcript
C clamp overhaul:
The tightening of the following screws need to be inspected every month:
Screw between the arm and the clamp:
These 4 screws fix the arm to the clamp.
They need to be tightened to have a good
transmission of the current. A bad
tightening leads to a loss of current, and
worst can damage your arm or clamp
irreversibly.
Screws between the copper cable terminals to the jack:
This screw fixes the copper cable terminals
to the clamp. The tightening needs to be
overhauled or you can have a loss of
current or worst you can damage
irreversibly your machine.
22