Download user manual v5
Transcript
C clamp overhaul: The tightening of the following screws need to be inspected every month: Screw between the arm and the clamp: These 4 screws fix the arm to the clamp. They need to be tightened to have a good transmission of the current. A bad tightening leads to a loss of current, and worst can damage your arm or clamp irreversibly. Screws between the copper cable terminals to the jack: This screw fixes the copper cable terminals to the clamp. The tightening needs to be overhauled or you can have a loss of current or worst you can damage irreversibly your machine. 22