Download ASME A/S - r/v oceanus

5.5
How to use and adjust tension.
The winch has been designed with a constant tension mode.
Constant tension during operation.
With the TMS deployed and in operation, it is possible to set the winch in constant tension. By
pressing the CT button, the current tension is stored and will be used as set point. It is possible to
adjust the tension set point, by using the following procedure:
For more details see section 5.2.2.
Note: This function can only be activated when the cable length value in the display is above
30 m.
Title:
Author:
Winch Offshore Manual MASH 2000
JBK
Revision:
Date:
B
24-01-2012
Page:
64 of 78