Download Traqmate User Manual
Transcript
Traqmate User Manual V3.15 Figure 5 - DU Gauge Cluster Mount May 17, 2010 Figure 6 - DU Console Mount Connecting to the Sensor Unit After connecting the DU to the SU using the SU-DU connection cable, turn the display unit on by pressing the power button. The DU will briefly display the Firmware revision number of the SU and the DU. If instead, * SU NOT CONNECTED * is displayed, there is no communication between the SU and DU and the system will not work for data collection. You can still upload sessions and download configuration to the DU. Possible Remedies: • • • • • Ensure SU has power. Ensure SU-DU Connection cable is firmly plugged into both the DU and SU. Ensure SU is in operable state. Cycle power on SU. Ensure SU has proper firmware. Ensure DU has proper firmware. If you see the message SW Mismatch, Reload then the firmware in the DU and SU are incompatible. Reload the firmware of both the SU and DU with the latest downloads available on the traqmate.com website and try again. Copyright © 2005 - 2010 Track Systems Technologies, LLC Page 20