Download Lasers for Life Sciences

Lasers for Life Sciences
2016 Laser Overview
Superior Reliability & Performance
Lasers for Life Sciences
Overview of Laser Applications
Flow Cytometry
MPE Imaging
Medical Diagnostics
Applications:
• Flow Cytometry
• Confocal Microscopy
• Genomics
• Proteomics
• Medical Diagnostics
• Environmental Monitoring
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Lasers for Life Sciences
Overview of Laser Applications
Confocal Microscopy
Medical Instrumentation
DNA Sequencing
As one of the fastest growing segments for laser-based
solutions, Life Sciences covers a broad range of applications
from scientific research leading to medical advances, to
clinical functions where lasers are used in diagnostics.
Life science is important to improve our collective health
and well-being, and providing the technology that is vital to
the advancement of medicine is a major focus of Coherent’s
life sciences strategy.* Our lasers enable advances in life science research and clinical and medical applications such as
flow cytometry and cell sorting, microscopy, DNA sequencing and retina scanning. Lasers are predominantly used in
these applications to excite fluorophores attached to a sample, allowing researchers and clinicians to perform a variety
of important tests at both the cellular and molecular level.
Lasers for these applications are as varied as the instrument
devices themselves, and span the spectrum from continuouswave diode or optically pumped semiconductor lasers (OPSL)
to ultrafast titanium:sapphire systems. It is our mission to
enable new laser based applications taking advantage of a
leadership in innovation.
* We do not include medical therapeutic procedures in “Life Sciences” and have not included our portfolio of lasers for therapeutics such as high power OPSL, semiconductor or CO2 lasers in this brochure.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
1
Table of Contents
Ultimate Choice. Perfect Match.
Overview of Laser Applications
1
Ultimate Choice. Perfect Match.
4-11
OBIS Lasers
OBIS Laser Family
OBIS
12-19
OBIS FP
20-27
OBIS Galaxy
28-32
BioRay Laser Family
OBIS LG
33-35
BioRay Lasers
BioRay
36-38
Sapphire Laser Family
BioRay FR
39-41
Sapphire Lasers
Sapphire LP
42-46
Genesis Laser Family
Sapphire FP
47-51
Sapphire SF
Laser Accessories
Femtosecond Lasers
52-54
2
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis Lasers
Genesis CX STM-Series
Ultimate Choice. Perfect Match.
Table of Contents
55-61
Genesis CX 355 STM Compact (OEM)
62-65
Genesis CX SLM-Series
66-71
Genesis MX MTM-Series
72-80
Genesis MX STM-Series
81-88
Genesis MX SLM-Series
The Most Complete Portfolio for Life Sciences
98
Laser Accessories
99
OBIS LX/LS Scientific Remote
BioRay Laser Family
97
Sapphire Laser Family
Femtosecond Lasers
OBIS Laser Family
89-96
100-102
OBIS LX/LS Single Laser Remote
103-107
OBIS LX/LS 6-Laser Remote
108-113
OBIS LX/LS Heat Sink
114-116
OBIS LX/LS Laser Box
Sapphire Driver Unit
Genesis Laser Family
117-119
123
Doing Business with Coherent
127
How to Contact Us
128
Laser Accessories
Laser Measurement and Control Accessories
Femtosecond Lasers
120-122
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
3
Ultimate Choice. Perfect Match.
Ultimate Choice.
Perfect Match.
With nearly 50 years of experience in life sciences, Coherent understands
that getting the best results requires a laser that perfectly matches your
instrument in terms of wavelength, output power, beam quality, output
noise, and budget. That’s why we offer the industry’s widest choice of
laser technologies and performance options.
Sapphire
So, whether your challenge is in cutting edge research or developing
a cost-sensitive clinical instrument, you can be sure you’ll find the
perfect laser for your needs in the following pages.
OBIS LG
Coherent offers a variety of laser platforms to allow you the freedom to choose.
You have the choice, in the coming pages, to select your product by wavelength,
power, features or application.
Coherent makes it easy for you to optimize the laser to the work being
accomplished… the perfect match for value and performance.
4
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Ultimate Choice. Perfect Match.
OBIS LX, OBIS LS
BioRay
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
5
Ultimate Choice. Perfect Match.
Choose Your Laser by Application
Flow Cytometry:
•OBIS LX, OBIS LS and Sapphire lasers for visible wavelengths (375 nm to 785 nm)
•OBIS LG for 355 nm in the UV
•BioRay for stable, cost-effective compact systems
•Genesis CX for 355 nm in the UV, high power
Medical Diagnostics:
•OBIS LX, OBIS LS, Sapphire, Genesis MX, Genesis CX and OBIS LG lasers for visible
wavelengths (375 nm to 785 nm)
•OBIS LG for 355 nm in the UV
•BioRay for stable, cost-effective compact systems
Confocal Microscopy:
•OBIS LX for high speed modulation
•OBIS Fiber Pigtailed for Single-mode Polarization Maintaining fiber delivery
•OBIS and Sapphire Fiber Pigtailed for 458 nm to 594 nm
Medical Instrumentation:
•OBIS LX, OBIS LS, Sapphire, Genesis MX, Genesis CX and OBIS LG lasers for visible
wavelengths (375 nm to 785 nm)
•OBIS LG for 355 nm in the UV
•BioRay for stable, cost-effective compact systems
DNA Sequencing:
•Genesis MX lasers for visible wavelengths (460 nm to 639 nm)
•OBIS LX for 660 nm
•OBIS LS, OBIS LG or Sapphire for 532 nm
Multiphoton Excitation (MPE): for MPE applications, please refer to
Femtosecond Lasers from Coherent on page 115 of this Guide.
6
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Ultimate Choice. Perfect Match.
Choose Your Laser by Features
Continuous-Wave (CW):
BioRay, OBIS LS, OBIS LX, Sapphire, OBIS LG,
Genesis CX, Genesis MX
Modulation: Analog to 500 KHz
BioRay
Modulation: Analog to 100 KHz and/or Digital to 50 KHz
OBIS LS
High Speed Modulation: Analog to 500 KHz and/or Digital to 150 MHz
OBIS LX
Fiber Delivery:
Fiber Pigtailed, Single-Mode Polarization-Maintaining Fiber
OBIS LX, OBIS LS, Sapphire
Fiber Connector, FC or SMA, 25 µm Core, SMA 905, 50 µm Core
Genesis MX, BioRay FR
Single Frequency (Longitudinal Mode)
Sapphire SF, Genesis CX, Genesis MX
OPSL (Optically Pumped Semiconductor Laser):
Constant Beam Parameters with Power
OBIS LS, Sapphire, OBIS LG, Genesis CX, Genesis MX
Adjustable Beam Divergence (User Adjustable Lens)
BioRay
Compact Laser with common beam, common footprint,
common interace, common accessories
OBIS LX and OBIS LS
6-Laser Remote, either power Remote and Scientific Remote
OBIS LX and OBIS LS
Beam Combining with OBIS Galaxy
OBIS LX with UFC Connector.
Optional OBIS LS and Sapphire with UFC conversion
Laser Box for 5-Laser integration with thermal management
(cooling), Analog/Digital I/O and laser safety features
OBIS LX and LS
(frequently purchased with OBIS Galaxy)
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
7
Ultimate Choice. Perfect Match.
Choose Your Laser by Wavelength
355 nm
375 nm
405 nm
422 nm
445 nm
450 nm
458 nm
460 nm
473 nm
480 nm
488 nm
505 nm
514 nm
520 nm
8
355 nm
OBIS LG up to 50 mW
375 nm
OBIS LX up to 50 mW
405 nm
OBIS LX up to 200 mW. OBIS LX Fiber Pigtailed up to 100 mW.
BioRay at 50 mW.
422 nm
OBIS LX at 100 mW
445 nm
OBIS LX at 75 mW.
OBIS LX Fiber Pigtailed at 45 mW.
450 nm
BioRay at 50 mW
458 nm
OBIS LX at 75 mW. OBIS LX Fiber Pigtailed at 45 mW.
Sapphire up to 75 mW. Sapphire FP at 40 mW.
460 nm
Genesis CX up to 1W. Genesis MX up to 2W.
473 nm
OBIS LX at 75 mW. OBIS LX Fiber Pigtailed at 50 mW.
480 nm
Add Genesis CX up to 2W. Genesis MX up to 2W.
488 nm
OBIS LX up to 150 mW. OBIS LX Fiber Pigtailed up to 100 mW.
OBIS LS up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW.
BioRay at 20 mW.
Sapphire up to 300 mW. Sapphire Fiber Pigtailed up to 200 mW.
Sapphire Single Frequency up to 100 mW.
Genesis CX up to 4W. Genesis MX up to 5W.
505 nm
OBIS LX at 50 mW. OBIS LX Fiber Pigtailed at 40 mW.
514 nm
OBIS LX at 40 mW. OBIS LX Fiber Pigtailed at 30 mW.
OBIS LS at 20 mW. OBIS LS Fiber Pigtailed at 15 mW.
Sapphire up to 150 mW. Sapphire Fiber Pigtailed up to 120 mW.
Genesis CX up to 4W. Genesis MX up to 5W.
520 nm
OBIS LX at 40 mW.
BioRay at 50 mW.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Ultimate Choice. Perfect Match.
Choose Your Laser by Wavelength
532 nm
OBIS LG at 3W.
OBIS LS at up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW.
Sapphire up to 300 mW. Sapphire Fiber Pigtailed up to 120 mW.
Sapphire Single Frequency up to 150 mW.
Genesis CX up to 10W. Genesis MX up to 8W.
552 nm
OBIS LS up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW.
Sapphire up to 200 mW. Sapphire Fiber Pigtailed up to 120 mW.
561 nm
OBIS LS up to 150 mW. OBIS LS Fiber Pigtailed up to 120 mW.
Sapphireup to 300 mW. Sapphire Fiber Pigtailed up to 200 mW.
Genesis CX up to 3W. Genesis MX up to 2W.
568 nm
Sapphire up to 200 mW
577 nm
Genesis CX up to 3W. Genesis MX up to 5W.
588 nm
Sapphire up to 100 mW. Sapphire Fiber Pigtailed at 40 mW.
590 nm
Genesis CX up to 2W. Genesis MX up to 2W.
594 nm
OBIS LS up to 100 mW. OBIS LS Fiber Pigtailed at 40 mW.
Sapphire up to 75 mW. Sapphire Fiber Pigtailed at 40 mW.
607 nm
Genesis MX up to 1.25W
561 nm
568 nm
577 nm
594 nm
607 nm
637 nm
OBIS LX at 140 mW. OBIS LX Fiber Pigtailed at 100 mW.
639 nm
Genesis MX up to 2W
640 nm
OBIS LX up to 100 mW. OBIS LX Fiber Pigtailed at 75 mW.
BioRay at 40 mW.
647 nm
OBIS LX at 120 mW. OBIS LX Fiber Pigtailed at 100 mW.
660 nm
OBIS LX at 100 mW. OBIS LX Fiber Pigtailed at 75 mW.
685 nm
OBIS LX at 40 mW
730 nm
OBIS LX at 30 mW
785 nm
OBIS LX at 100 mW
•
552 nm
588 nm
590 nm
637 nm
Toll Free: (800) 527-3786
532 nm
639 nm
640 nm
647 nm
660 nm
685 nm
730 nm
785 nm
Tel: (408) 764-4983
•
Superior Reliability & Performance
9
Ultimate Choice. Perfect Match.
Choose Your Laser by Output Power
10
OBIS LG: 20 mW to 3W
BioRay: 20 mW to 50 mW
OBIS LS: 20 mW to 150 mW
OBIS LX: 16 mW to 200 mW
OBIS FP: 15 mW to 100 mW
Sapphire LP: 10 mW to 300 mW
Sapphire SF: 20 mW to 150 mW
Sapphire FP: 40 mW to 200 mW
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Ultimate Choice.
Perfect Match.
Coherent offers a variety of laser platforms to allow you the freedom
to choose. The following pages provide the details of the OBIS LG,
OBIS LX, OBIS LS, BioRay, Sapphire and Accessories.
Coherent has made it easy for you to optimize the laser to the work
being accomplished… the perfect match for value and performance.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
11
OBIS
Lasers for Plug-and-Play Simplicity
OBIS Features:
OBIS Laser Family
The Coherent OBIS suite of products offers higher signal-to-noise ratio laser
technology for a wide range of applications in the Life Sciences, Environmental
Monitoring, and Inspection markets.
Our Optically Pumped Semiconductor Laser (OPSL) technology combined with our laser diode solutions delivers the industry-best laser reliability and performance. The OBIS family of smart lasers covers the wavelength spectrum—from
the Ultraviolet at 375 nm to the near-Infrared at 785 nm.
The plug-and-play flexibility allows customers to integrate the product of their
choice much faster, thereby reducing their time-to-market and costs.
OBIS lasers deliver superior power, low RMS noise, and higher beam quality that
are key customers needs from any laser source.
Coherent has implemented an intelligent design that allows multiple ways to
interface with the laser, giving our customers the ability to choose the smartest
operation process for their specific application requirements.
OBIS LX: The OBIS LX diode lasers deliver a low astigmatism
circular beam as a result of our high quality optics technology.
The OBIS LX beam measurements are made at the 90/10
Clip Levels to ensure the highest mode quality.
OBIS LS: OPSL technology provides the highest quality beam offering excellent circularity and beam parameters
(divergence, diameter) that are constant over a wide power range.
•Commonality across the
spectrum in dimensions,
beam and interface
•Integrated control electronics
•Analog, Digital and mixed
modulation modes
OBIS Applications:
•Confocal Microscopy
•DNA Sequencing
•Flow Cytometry
•Medical Imaging and
Instrumentation
OBIS lasers are now compatible with MetaMorph and µManager Software for microscopy automation and image analysis.
www.Coherent.com/OBIS
12
Superior Reliability & Performance
OBIS
Lasers for Plug-and-Play Simplicity
OBIS
375LX System Specifications
Wavelength1 (nm) OBIS
405LX 375
Output Power2 (mW)
M2 (Beam Quality)3
Beam Diameter at 1/e2 (mm)
Beam Divergence (mrad, full-angle)
Pointing Stability (μrad)
(over 2 hours after warm-up and ±3°C)
Pointing Stability Over Temp. (μrad/°C)
RMS Noise (%)(20 Hz to 20 MHz)
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
OBIS
445LX
445
405
413
422
100
100
75
TEM00
TEM00
TEM00
TEM00
≤1:1.2
≤1:1.2
≤1:1.2
≤1:1.2
≤1:1.2
0.7 ±0.1
0.8 ±0.1
0.8 ±0.1
0.9 ±0.1
0.6 ±0.1
<1
<1
<1
<1.1
<1.1
<30
<30
<30
<30
<30
50
TEM00
≤1.3
Beam Asymmetry
OBIS
422LX 50, 100, 140 200, 250
16
Spatial Mode
OBIS
413LX*
≤1.2
≤1.3
≤1.2
≤1.2
≤1.2
<5
<5
<5
<5
<5
≤0.05
≤0.05
≤0.05
≤0.05
≤0.05
<0.5
<0.5
<0.5
<0.5
<0.5
Long-term Power Stability (%)(8 hrs., ±3°C)
<2
<2
<2
<2
<2
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
<5
<5
Polarization Ratio
Minimum 100:1, Vertical ±5°
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio)
75
<5
<5
>1,000,000:1 at 0 Hz,
>250:1 at 75 MHz
150
<2
<2
Analog Modulation
Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio)
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
Static Alignment Tolerances
Beam Position from Reference5 (mm)
Beam Angle5 (mrad)
Beam Waist Position at Exit Window (mm)
Laser Safety Classification
ESD Protection
Power Consumption (W)
Laser Head Baseplate Temp. (Max., °C)
150
150
<2
<2
<2
<2
>1,000,000:1 at 0 Hz, >250:1 at 150 MHz
150
<2
<2
3b
3b
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
50
50
50
50
50
Heat Dissipation of Laser Head6 (W)
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Ambient Temperature7
Operating Condition8 (°C)
Non-operating Condition (°C)
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
30
30
30
30
30
Shock Tolerance (g)(6 ms)
1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW.
3
For LX versions the M2 measured with ModeMaster with 90/10 clip levels.
4
For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes.
5
See mechanical drawing for exit beam location.
6
Typically 85% of heat load through the base plate. See Users Manual for more detail.
7
Non-Condensing. See User Manual for more detail.
8
For LS versions laser head baseplate temperature needs to be maintained at <_40°C.
* Preliminary version.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
13
OBIS
Lasers for Plug-and-Play Simplicity
System Specifications
Wavelength1 (nm) Output Power2 (mW) Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm)
OBIS
458LX OBIS
473LX OBIS
488LX OBIS
488LS
458
473
75
75
TEM00
≤1.2
TEM00
TEM00
TEM00
≤1:1.2
≤1:1.2
≤1:1.2
≤1:1.1
488
488
50
≤1.2
150
20, 60, 80, 100, 150
≤1.2
0.8 ±0.1
0.8 ±0.1
Beam Divergence (mrad, full-angle) <1.1
<1.1
<1.2
<1.2
Pointing Stability (µrad)
(over 2 hours after warm-up and ±3°C)
<30
<30
<30
<30
Pointing Stability Over Temp. (µrad/°C)
RMS Noise (%)(20 Hz to 20 MHz)
Peak-to-Peak Noise (%)(20 Hz to 20 kHz) 0.8 ±0.1
0.7 ±0.1
≤1.1
0.7 ±0.05
<5
<5
<5
<5
≤0.05
≤0.05
≤0.05
≤0.25
<0.5
<0.5
<0.5
<1
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
<2
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
<5
Polarization Ratio
Minimum 100:1, Vertical ±5°
Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio) Static Alignment Tolerances Beam Position from Reference5 (mm)
Beam Angle5 (mrad)
Beam Waist Position at Exit Window (mm)
Laser Safety Classification
ESD Protection
Power Consumption (W)
Laser Head Baseplate Temp. (Max., °C)
150
<2
<2
150
<2
<2
>1,000,000:1 at 0 Hz, >250:1 at 150 MHz
150
<2
<2.5
0.05
<18,000
<2000
Infinite at 0 Hz to 50 kHz
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
100
<3000
<3000
>50:1
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
<0.5
<2.5
±200
3b
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 8,
Max. 12
50
50
50
40
Heat Dissipation of Laser Head6 (W)
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 8,
Max. 12
Ambient Temperature7
Operating Condition8 (°C)
Non-operating Condition (°C)
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
15 to 40
-20 to 60
30
30
30
30
Shock Tolerance (g)(6 ms)
1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW.
3
For LX versions the M2 measured with ModeMaster with 90/10 clip levels.
4
For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes.
5
See mechanical drawing for exit beam location.
6
Typically 85% of heat load through the base plate. See Users Manual for more detail.
7
Non-Condensing. See User Manual for more detail.
8
For LS versions laser head baseplate temperature needs to be maintained at <_40°C.
14
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS
Lasers for Plug-and-Play Simplicity
OBIS
505LX
OBIS
514LS OBIS
514LX OBIS
520LX
Wavelength1 (nm) 505
514
514
520
Output Power2 (mW) 50
20
40
40
TEM00
≤1.2
TEM00
TEM00
TEM00
≤1:1.2
≤1:1.1
≤1:1.2
≤1:1.2
0.6 ±0.1
System Specifications
Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm)
≤1.1
≤1.2
≤1.2
0.7 ±0.1
0.7 ±0.05
0.6 ±0.1
Beam Divergence (mrad, full-angle) <1.2
<1.2
<1.1
<1.1
Pointing Stability (µrad)
(over 2 hours after warm-up and ±3°C)
<30
<30
<30
<30
Pointing Stability Over Temp. (µrad/°C)
RMS Noise (%)(20 Hz to 20 MHz)
Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <5
<5
<5
<5
≤0.05
≤0.25
≤0.05
≤0.05
<0.5
<1
<1
<1
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
<2
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
<5
Polarization Ratio
Minimum 100:1, Vertical ±5°
Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150
<2
<2.5
>1,000,000:1 at 0 Hz,
>250:1 at 150 MHz
0.05
<18,000
<2000
Infinite at
0 Hz to 50 kHz
100
<3.5
<2
>1,000,000:1 at 0 Hz, >250:1 at 100 MHz
100
<3.5
<2
>1,000,000:1 at 0 Hz,
>250:1 at 100 MHz
Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio) 500
<700
<700
>1,000,000:1
100
<3000
<3000
>50:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
<1
<5
n/a
<0.5
<2.5
±200
<1
<5
n/a
<1
<5
n/a
Static Alignment Tolerances Beam Position from Reference5 (mm)
Beam Angle5 (mrad)
Beam Waist Position at Exit Window (mm)
Laser Safety Classification
ESD Protection
Power Consumption (W)
3b
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 8,
Max. 12
Typical 5,
Max. 13
Typical 5,
Max. 13
Laser Head Baseplate Temp. (Max., °C)
50
40
50
50
Heat Dissipation of Laser Head6 (W)
Typical 5,
Max. 13
Typical 8,
Max. 12
Typical 5,
Max. 13
Typical 5,
Max. 13
Ambient Temperature7
Operating Condition8 (°C)
Non-operating Condition (°C)
10 to 50
-20 to 60
15 to 40
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
30
30
30
30
Shock Tolerance (g)(6 ms)
1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW.
3
For LX versions the M2 measured with ModeMaster with 90/10 clip levels.
4
For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes.
5
See mechanical drawing for exit beam location.
6
Typically 85% of heat load through the base plate. See Users Manual for more detail.
7
Non-Condensing. See User Manual for more detail.
8
For LS versions laser head baseplate temperature needs to be maintained at <_40°C.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
15
OBIS
Lasers for Plug-and-Play Simplicity
OBIS
532LS System Specifications
Wavelength1 (nm) Output Power2 (mW) Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm)
OBIS
552LS OBIS
561LS
OBIS
594LS
532
552
561
594
20, 50, 80, 100, 150
20, 60, 80, 100, 150
20, 50, 80, 100, 150
20, 60, 100
TEM00
≤1.1
TEM00
TEM00
TEM00
≤1:1.1
≤1:1.1
≤1:1.1
≤1:1.1
0.7 ±0.05
≤1.1
≤1.1
≤1.1
0.7 ±0.05
0.7 ±0.05
0.7 ±0.05
Beam Divergence (mrad, full-angle) <1.2
<1.2
<1.2
<1.3
Pointing Stability (µrad)
(over 2 hours after warm-up and ±3°C)
<30
<30
<30
<30
Pointing Stability Over Temp. (µrad/°C)
RMS Noise (%)(20 Hz to 20 MHz)
<5
<5
<5
<5
≤0.25
≤0.25
≤0.25
≤0.25
Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <1
<1
<1
<1
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
<2
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
<5
Polarization Ratio
Minimum 100:1, Vertical ±5°
Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 0.05
<18,000
<2000
0.05
0.05
<18,000
<18,000
<2000
<2000
Infinite at 0 Hz to 50 kHz
0.05
<18,000
<2000
Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio) 100
<3000
<3000
>50:1
100
<3000
<3000
>50:1
100
<3000
<3000
>50:1
100
<3000
<3000
>50:1
Static Alignment Tolerances Beam Position from Reference5 (mm)
Beam Angle5 (mrad)
Beam Waist Position at Exit Window (mm)
<0.5
<2.5
±200
<0.5
<2.5
±200
<0.5
<2.5
±200
<0.5
<2.5
±200
3b
3b
3b
3b
ESD Protection
Laser Safety Classification
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Power Consumption (W)
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Laser Head Baseplate Temp. (Max., °C)
40
40
40
40
Heat Dissipation of Laser Head6 (W)
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Ambient Temperature7
Operating Condition8 (°C)
Non-operating Condition (°C)
15 to 40
-20 to 60
15 to 40
-20 to 60
15 to 40
-20 to 60
15 to 40
-20 to 60
30
30
30
30
Shock Tolerance (g)(6 ms)
1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW.
3
For LX versions the M2 measured with ModeMaster with 90/10 clip levels.
4
For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes.
5
See mechanical drawing for exit beam location.
6
Typically 85% of heat load through the base plate. See Users Manual for more detail.
7
Non-Condensing. See User Manual for more detail.
8
For LS versions laser head baseplate temperature needs to be maintained at <_40°C.
16
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS
Lasers for Plug-and-Play Simplicity
OBIS
637LX System Specifications
OBIS
640LX OBIS
647LX OBIS
660LX
660
Wavelength1 (nm)
637
640
647
Output Power2 (mW)
140
40, 100
120
100
TEM00
≤1.2
TEM00
TEM00
TEM00
≤1:1.2
≤1:1.2
≤1:1.2
≤1:1.2
0.9 ±0.1
Spatial Mode
M2 (Beam Quality)3
Beam Asymmetry
Beam Diameter at 1/e2 (mm)
≤1.2
≤1.2
≤1.2
0.7 ±0.1
0.8 ±0.1
0.8 ±0.1
Beam Divergence (mrad, full-angle)
<1.3
<1.3
<1.3
<1.3
Pointing Stability (μrad)
(over 2 hours after warm-up and ±3°C)
<30
<30
<30
<30
Pointing Stability Over Temp. (μrad/°C)
RMS Noise (%)(20 Hz to 20 MHz)
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
<5
<5
<5
<5
≤0.05
≤0.05
≤0.05
≤0.05
<0.5
<0.5
<0.5
<0.5
Long-term Power Stability (%)(8 hrs., ±3°C)
<2
<2
<2
<2
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
<5
Polarization Ratio
Minimum 100:1, Vertical ±5°
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio)
Analog Modulation
Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio)
150
<2
<2
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
Laser Safety Classification
Power Consumption (W)
150
<2
<2
300
<1200
<800
>1,000,000:1
Static Alignment Tolerances
Beam Position from Reference5 (mm)
Beam Angle5 (mrad)
Beam Waist Position at Exit Window (mm)
ESD Protection
150
150
<2
<2
<2
<2
>1,000,000:1 at 0 Hz, >250:1 at 150 MHz
3b
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Laser Head Baseplate Temp. (Max., °C)
50
50
50
50
Heat Dissipation of Laser Head6 (W)
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Ambient Temperature7
Operating Condition8 (°C)
Non-operating Condition (°C)
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
30
30
30
30
Shock Tolerance (g)(6 ms)
1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW.
3
For LX versions the M2 measured with ModeMaster with 90/10 clip levels.
4
For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes.
5
See mechanical drawing for exit beam location.
6
Typically 85% of heat load through the base plate. See Users Manual for more detail.
7
Non-Condensing. See User Manual for more detail.
8
For LS versions laser head baseplate temperature needs to be maintained at <_40°C.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
17
OBIS
Lasers for Plug-and-Play Simplicity
OBIS
685LX OBIS
730LX Wavelength1 (nm) 685
730
785
Output Power2 (mW) 40
30
100
TEM00
≤1.2
TEM00
TEM00
≤1:1.2
≤1:1.2
≤1:1.2
0.7 ±0.1
System Specifications
Spatial Mode M2 (Beam Quality)3 Beam Asymmetry Beam Diameter at 1/e2 (mm)
OBIS
785LX
≤1.2
≤1.2
0.8 ±0.1
0.8 ±0.1
Beam Divergence (mrad, full-angle) <1.3
<1.3
<1.7
Pointing Stability (µrad)
(over 2 hours after warm-up and ±3°C)
<30
<30
<30
Pointing Stability Over Temp. (µrad/°C)
RMS Noise (%)(20 Hz to 20 MHz)
Peak-to-Peak Noise (%)(20 Hz to 20 kHz) <5
<5
<5
≤0.05
≤0.05
≤0.05
<0.5
<0.5
<0.5
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
Minimum 100:1,
Vertical ±5°
Minimum 100:1,
Vertical ±5°
Minimum 100:1,
Vertical ±5°
Polarization Ratio
Laser Drive Modes CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150
<2
<2
150
<2
<2
>1,000,000:1 at 0 Hz, >250:1 at 150 MHz
Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (extinction ratio) 500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
<1
<5
n/a
<1
<5
n/a
<1
<5
n/a
Static Alignment Tolerances Beam Position from Reference5 (mm)
Beam Angle5 (mrad)
Beam Waist Position at Exit Window (mm)
Laser Safety Classification
ESD Protection
Power Consumption (W)
Laser Head Baseplate Temp. (Max., °C)
150
<2
<2
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
50
50
50
Heat Dissipation of Laser Head6 (W)
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Ambient Temperature7
Operating Condition8 (°C)
Non-operating Condition (°C)
10 to 50
-20 to 60
10 to 50
-20 to 60
10 to 50
-20 to 60
30
30
30
Shock Tolerance (g)(6 ms)
1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
For LS versions all residual laser emission at 808 nm pumplight or fundamental <0.1 mW.
3
For LX versions the M2 measured with ModeMaster with 90/10 clip levels.
4
For LS versions typical power-on delay 1 minute. For LX versions typical power-on delay 0.1 minutes.
5
See mechanical drawing for exit beam location.
6
Typically 85% of heat load through the base plate. See Users Manual for more detail.
7
Non-Condensing. See User Manual for more detail.
8
For LS versions laser head baseplate temperature needs to be maintained at <_40°C.
18
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS
Lasers for Plug-and-Play Simplicity
Utility and Environmental Requirements
Operating Voltage1 (VDC)
12 ±2
Dimensions (L x W x H)
Laser
OBIS Remote (optional)
DC Power Supply (optional)
Cable, Laser to OBIS Remote (optional)
70 x 40 x 38 mm (2.75 x 1.57 x 1.5 in.)
105 x 68 x 36 mm (4.13 x 2.68 x 1.42 in.)
105 x 42 x 33 mm (4.13 x 1.65 x 1.3 in.)
1 m (3.28 ft.)(3 meter and 0.3 meter sold separately)
Weights
Laser
OBIS Remote (optional)
DC Power Supply (optional)
Cable, Laser to OBIS Remote (optional)
0.16 kg (0.35 lbs.)
0.24 kg (0.53 lbs.)
0.36 kg (0.79 lbs.)
0.1 kg (0.22 lbs.) for 1 meter
1
If user supplied, the DC power supply has to meet the following requirements: power >20W; ripple <5% peak-to-peak; line regulation <0.5%.
Mechanical Specifications
Status
Indicator
Top View
3 mm
(0.12 in.)
64 mm
(2.52 in.)
5 mm
(0.2 in.)
38 mm
(1.5 in.)
30 mm
(1.18 in.)
70 mm
(2.76 in.)
40 mm
(1.57 in.)
4X Ø3.18 mm
(0.13 in.) Thru
OEM Label
Safety
Shutter
Laser Exit Aperture
M6 X 0.75 Thread
2.54 mm Deep
19 mm
(0.75 in.)
Fan
Power
USB
Rear View
15.5 mm
(0.61 in.)
Rear View with
OEM Label Removed
Front View
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
SDR
•
Superior Reliability & Performance
19
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
OBIS Laser Family
OBIS FP Features:
The OBIS Fiber Pigtailed (OBIS FP) suite of lasers delivers the simplicity of a plug-and-play platform for a wide range of wavelengths from the violet to the near IR. The fiber pigtail termination is complete with a FC/APC connector. The OBIS FP lasers are based on the OBIS laser platform, offering the same speed-to-market benefits.
The OBIS FP lasers offer superior performance, reliability, and hands-free operation. These lasers combine single-mode polarization-maintaining fiber with an
FC/APC connector for a high-quality low-noise laser beam output. They utilize
proprietary fiber technology to provide superior lifetimes, and permanent fiber
attachments for guaranteed power over time.
OBIS FP lasers are also compatible with MetaMorph and μManager Software for microscopy automation and image analysis.
•All OBIS advantages with
fiber delivery
•Single mode, polarization
maintaining fiber
•Extended life fiber design
OBIS FP Applications:
•Confocal Microscopy
•DNA Sequencing
•Flow Cytometry
•Medical Imaging and
Instrumentation
www.Coherent.com/OBISFP
20
Superior Reliability & Performance
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
System Specifications
Wavelength1 (nm) Output Power2 (mW) Output from Fiber
Fiber Cable Type
Fiber Cable Length (m)(minimum)
Fiber Numerical Aperture (NA)(1/e2)
Fiber Core Diameter (µm)(typical)
OBIS FP
405LX
OBIS FP
413LX*
OBIS FP
445LX
445
405
413
50, 100
50
45
FC/APC;
8° angled7
FC/APC;
8° angled7
FC/APC;
8° angled7
3 mm Mono-Coil
3 mm Mono-Coil
3 mm Mono-Coil
1
1
1
0.055
0.055
0.055
3.5
3.5
3.5
TEM00
TEM00
TEM00
Beam Asymmetry
≤1:1.1
≤1:1.1
≤1:1.1
RMS Noise (%)(20 Hz to 20 MHz)
Spatial Mode M2 (Beam Quality)3 ≤1.1
≤1.1
≤1.1
≤0.2
≤0.2
≤0.2
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
≤2
≤2
≤2
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
Long-term Output Power Average (%/hrs.)
≤5/1000
≤5/1000
≤5/1000
Warm-up Time4 (minutes)(from cold start)
Polarization Ratio
<5
<5
<5
Minimum 100:1
Minimum 100:1
Minimum 100:1
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150
<2
<2
150
<2
<2
>1,000,000:1 at 0 Hz, >250:1 at 150 MHz
Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (10% to 90%)(nsec)
Modulation Depth (extinction ratio) 500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
Laser Safety Classification
ESD Protection Power Consumption (W) Laser Head Baseplate Temperature (Max., °C)
150
<2
<2
500
<700
<700
>1,000,000:1
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
50
50
50
Heat Dissipation of Laser Head5 (W) Typical 5,
Max. 13
Typical 5,
Max. 13 Typical 5,
Max. 13
Ambient Temperature6
Operating Condition (°C)
Non-operating Condition (°C)
10 to 50
-20 to +60
10 to 50
-20 to +60
10 to 50
-20 to +60
30
30
30
Shock Tolerance (g)(6 ms) 1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
3
M2 measured with ModeMaster with 90/10 clip levels.
4
Typical power-on delay 0.1 minutes.
5
Typically 85% of heat load through the base plate. See Users Manual for more detail.
6
Non-Condensing. See User Manual for more detail.
7
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
* Preliminary version.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
21
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
OBIS FP
473LX System Specifications
OBIS FP
488LX OBIS FP
488LS
Wavelength1 (nm) 473
488
Output Power2 (mW) 50
30, 100
15
40, 60, 80, 120
Output from Fiber
FC/APC;
8° angled7
FC/APC;
8° angled7
FC/APC;
8° angled
FC/APC;
8° angled7
Fiber Cable Type
3 mm
Mono-Coil
3 mm
Mono-Coil
Fiber Cable Length (m)(minimum)
488
5 mm
Protective Tubing
1
1
0.055
0.055
3.5
3.5
4
TEM00
TEM00
TEM00
Beam Asymmetry
≤1:1.1
≤1:1.1
≤1:1.1
RMS Noise (%)(20 Hz to 20 MHz)
≤0.25
Fiber Numerical Aperture (NA)(1/e2)
Fiber Core Diameter (µm)(typical)
Spatial Mode M2 (Beam Quality)3 ≤1.1
1
0.1
≤1.1
0.06
≤1.1
≤0.2
≤0.2
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
≤2
≤2
≤1
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
Long-term Output Power Average (%/hrs.)
≤4/1000
≤4/1000
-
Warm-up Time4 (minutes)(from cold start)
<5
<5
<5
Minimum 100:1
Minimum 100:1
Polarization Ratio
Minimum 100:1
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150
<2
<2
>1,000,000:1 at 0 Hz,
>250:1 at 150 MHz
150
<2
<2.5
>1,000,000:1 at 0 Hz,
>250:1 at 150 MHz
0.05
<18,000
<2000
Infinite at
0 Hz to 50 kHz
Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (10% to 90%)(nsec)
Modulation Depth (extinction ratio) 500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
100
<3000
<3000
>50:1
Laser Safety Classification
ESD Protection Power Consumption (W) Laser Head Baseplate Temperature (Max., °C)
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 8,
Max. 12
50
50
40
Heat Dissipation of Laser Head5 (W) Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 8,
Max. 12
Ambient Temperature6
Operating Condition (°C)
Non-operating Condition (°C)
10 to 50
-20 to +60
10 to 50
-20 to +60
15 to 40
-20 to +60
30
30
30
Shock Tolerance (g)(6 ms) 1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
3
M2 measured with ModeMaster with 90/10 clip levels.
4
Typical power-on delay 0.1 minutes.
5
Typically 85% of heat load through the base plate. See Users Manual for more detail.
6
Non-Condensing. See User Manual for more detail.
7
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
22
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
OBIS FP
505LX
System Specifications
OBIS FP
514LS OBIS FP
514LX OBIS FP
520LX
520
Wavelength1 (nm) 505
514
514
Output Power2 (mW) 50
15
30
25
Output from Fiber
FC/APC;
8° angled7
FC/APC;
8° angled
FC/APC;
8° angled7
FC/APC;
8° angled7
Fiber Cable Type
3 mm
Mono-Coil
5 mm
Protective Tubing
3 mm
Mono-Coil
3 mm
Mono-Coil
Fiber Cable Length (m)(minimum)
Fiber Numerical Aperture (NA)(1/e2)
Fiber Core Diameter (µm)(typical)
1
1
1
1
0.055
0.1
0.055
0.055
3.5
4
4.5
4.5
TEM00
TEM00
TEM00
TEM00
Beam Asymmetry
≤1:1.1
≤1:1.1
≤1:1.1
≤1:1.1
RMS Noise (%)(20 Hz to 20 MHz)
≤0.2
≤0.2
_<1
≤0.25
≤2
≤0.25
_<2
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
<2
Long-term Output Power Average (%/hrs.)
≤4/1000
-
≤3/1000
≤3/1000
Spatial Mode M2 (Beam Quality)3 ≤1.1
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
Warm-up Time4 (minutes)(from cold start)
Polarization Ratio
≤1.1
≤1.1
≤1.1
≤2
<5
<5
<5
<5
Minimum 100:1
Minimum 100:1
Minimum 100:1
Minimum 100:1
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) 150
<2
<2
>1,000,000:1 at 0 Hz,
>250:1 at 150 MHz
0.05
<18,000
<2000
Infinite at
0 Hz to 50 kHz
100
<3.5
<2
>1,000,000:1 at 0 Hz,
>250:1 at 100 MHz
100
<3.5
<2
>1,000,000:1 at 0 Hz,
>250:1 at 100 MHz
Analog Modulation Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (10% to 90%)(nsec)
Modulation Depth (extinction ratio) 500
700
700
>1,000,000:1
100
<3000
<3000
>50:1
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
Laser Safety Classification
ESD Protection Power Consumption (W) 3b
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 8,
Max. 12
Typical 5,
Max. 13
Typical 5,
Max. 13
Laser Head Baseplate Temperature (Max., °C)
50
40
50
50
Heat Dissipation of Laser Head5 (W) Typical 5,
Max. 13
Typical 8,
Max. 12
Typical 5,
Max. 13
Typical 5,
Max. 13
Ambient Temperature6
Operating Condition (°C)
Non-operating Condition (°C)
10 to 50
-20 to +60
15 to 40
-20 to +60
10 to 50
-20 to +60
10 to 50
-20 to +60
30
30
30
30
Shock Tolerance (g)(6 ms) 1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
3
M2 measured with ModeMaster with 90/10 clip levels.
4
Typical power-on delay 0.1 minutes.
5
Typically 85% of heat load through the base plate. See Users Manual for more detail.
6
Non-Condensing. See User Manual for more detail.
7
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
23
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
OBIS FP
532LS System Specifications
Wavelength1 (nm) OBIS FP
552LS 532
Output Power2 (mW) Output from Fiber
Fiber Cable Type
552
561
594
40, 60, 80, 120
15
40, 60, 80, 120
40, 60, 80, 120
40
FC/APC;
8° angled
FC/APC;
8° angled7
FC/APC;
8° angled
FC/APC;
8° angled7
FC/APC;
8° angled7
FC/APC;
8° angled7
5 mm
Protective Tubing
5 mm
Protective Tubing
Fiber Cable Length (m)(minimum)
Fiber Core Diameter (µm)(typical)
OBIS FP
594LS
20
5 mm
Protective Tubing
Fiber Numerical Aperture (NA)(1/e2)
OBIS FP
561LS
5 mm
Protective Tubing
1
0.1
1
0.06
0.1
0.06
1
1
0.06
0.06
4
4
4
4
TEM00
≤1.1
TEM00
TEM00
TEM00
Beam Asymmetry
≤1:1.1
≤1:1.1
≤1:1.1
≤1:1.1
RMS Noise (%)(20 Hz to 20 MHz)
≤0.25
Spatial Mode M2 (Beam Quality)3 ≤1.1
≤1.1
≤1.1
≤0.25
≤0.25
≤0.25
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
≤1
≤1
≤1
≤1
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
<2
Long-term Output Power Average (%/hrs.)
-
-
-
-
Warm-up Time4 (minutes)(from Cold Start)
<5
<5
<5
<5
Minimum 100:1
Minimum 100:1
Minimum 100:1
Polarization Ratio
Minimum 100:1
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio) Analog Modulation
Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (10% to 90%)(nsec)
Modulation Depth (extinction ratio) Laser Safety Classification
0.05
<18,000
<2000
0.05
0.05
<18,000
<18,000
<2000
<2000
Infinite at 0 Hz to 50 kHz
0.05
<18,000
<2000
100
<3000
<3000
>50:1
100
<3000
<3000
>50:1
100
<3000
<3000
>50:1
100
<3000
<3000
>50:1
3b
3b
3b
3b
ESD Protection EN61326-1
EN61326-1
EN61326-1
EN61326-1
Power Consumption (W) Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
40
40
40
40
Heat Dissipation of Laser Head5 (W) Laser Head Baseplate Temperature (Max., °C)
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Typical 8,
Max. 12
Ambient Temperature6
Operating Condition (°C)
Non-operating Condition (°C)
15 to 40
-20 to +60
15 to 40
-20 to +60
15 to 40
-20 to +60
15 to 40
-20 to +60
30
30
30
30
Shock Tolerance (g)(6 ms) 1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
3
M2 measured with ModeMaster with 90/10 clip levels.
4
Typical power-on delay 0.1 minutes.
5
Typically 85% of heat load through the base plate. See Users Manual for more detail.
6
Non-Condensing. See User Manual for more detail.
7
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
24
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
OBIS FP
637LX OBIS FP
640LX Wavelength1 (nm) 637
Output Power2 (mW) 100
System Specifications
Output from Fiber
Fiber Cable Type
OBIS FP
647LX OBIS FP
660LX
640
647
660
75
100
75
FC/APC;
8° angled
FC/APC;
8° angled
FC/APC;
8° angled
FC/APC;
8° angled
3 mm Mono-Coil
3 mm Mono-Coil
3 mm Mono-Coil
3 mm Mono-Coil
1
1
1
1
0.09
0.09
0.09
0.09
Fiber Cable Length (m)(minimum)
Fiber Numerical Aperture (NA)(1/e2)
Fiber Core Diameter (µm)(typical)
4.5
4.5
4.5
4.5
TEM00
TEM00
≤1.1
TEM00
≤1.1
TEM00
Beam Asymmetry
≤1:1.1
≤1:1.1
≤1:1.1
≤1:1.1
RMS Noise (%)(20 Hz to 20 MHz)
Spatial Mode M2 (Beam Quality)3 ≤1.1
≤1.1
≤0.2
≤0.2
≤0.2
≤0.2
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
≤2
≤2
≤2
≤2
Long-term Power Stability (%)(8 hrs., ±3°C) <2
<2
<2
<2
Long-term Output Power Average (%/hrs.)
≤3/1000
≤3/1000
≤3/1000
≤3/1000
Warm-up Time4 (minutes)(from cold start)
Polarization Ratio
<5
<5
<5
<5
Minimum 100:1
Minimum 100:1
Minimum 100:1
Minimum 100:1
Laser Drive Modes
CW, Analog Modulation, Digital Modulation and Computer Control
Digital Modulation
Maximum Bandwidth (MHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (extinction ratio)
Analog Modulation
Maximum Bandwidth (kHz)
Rise Time (10% to 90%)(nsec)
Fall Time (10% to 90%)(nsec)
Modulation Depth (extinction ratio) 150
<2
<2
300
<1200
<800
>1,000,000:1
Laser Safety Classification
ESD Protection Power Consumption (W) 150
150
<2
<2
<2
<2
>1,000,000:1 at 0 Hz, >250:1 at 150 MHz
500
<700
<700
>1,000,000:1
500
<700
<700
>1,000,000:1
150
<2
<2
500
<700
<700
>1,000,000:1
3b
3b
3b
3b
EN61326-1
EN61326-1
EN61326-1
EN61326-1
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Laser Head Baseplate Temperature (Max., °C)
50
50
50
50
Heat Dissipation of Laser Head5 (W) Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Typical 5,
Max. 13
Ambient Temperature6
Operating Condition (°C)
Non-operating Condition (°C)
10 to 50
-20 to +60
10 to 50
-20 to +60
10 to 50
-20 to +60
10 to 50
-20 to +60
30
30
30
30
Shock Tolerance (g)(6 ms) 1
Laser-to-laser wavelength tolerance ±2 nm for all OBIS LS versions. For OBIS LX wavelength tolerance of ±5 nm except for 413LX with a 410 nm to 420 nm range,
520LX with a 520 nm to 530 nm range, 640LX with 635 nm to 644 nm range, 660LX with 652 nm to 665 nm range and 685LX with 675 nm to 695 nm range.
2
Output power is variable in CW Mode from 1 mW (1% for LX Models) to 110% of rated power. Specifications are valid for 100% power.
3
M2 measured with ModeMaster with 90/10 clip levels.
4
Typical power-on delay 0.1 minutes.
5
Typically 85% of heat load through the base plate. See Users Manual for more detail.
6
Non-Condensing. See User Manual for more detail.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
25
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
Utility and Environmental Requirements
Operating Voltage1 (VDC)
12 ±2
Dimensions (L x W x H)
Laser
OBIS Remote (optional)
DC Power Supply (optional)
Cable, Laser to OBIS Remote (optional)
Fiber Minimum Bend Radius
70 x 40 x 38 mm (2.75 x 1.57 x 1.5 in.)
105 x 68 x 36 mm (4.13 x 2.68 x 1.42 in.)
105 x 42 x 33 mm (4.13 x 1.65 x 1.3 in.)
1 m (3.28 ft.)(3 meter and 0.3 meter sold separately)
51 mm (2.0 in.)
Weights
Laser
OBIS Remote (optional)
DC Power Supply (optional)
Cable, Laser to OBIS Remote (optional)
Fiber Tensile Load (max.)
0.23 kg (0.5 lbs.)
0.23 kg (0.5 lbs.)
0.36 kg (0.79 lbs.)
0.1 kg (0.22 lbs.) for 1 meter
1 kg (2.2 lbs.)
1
If user supplied, the DC power supply has to meet the following requirements: power >20W; ripple <5% peak-to-peak; line regulation <0.5%.
Mechanical Specifications
OBIS FP LX
Front
View
38.1 mm
(1.5 in.)
Side View
Rear
View
OEM Label
5.1 mm
(0.2 in.)
40 mm
(1.57 in.)
1m (minimum)
(39.4 in.)
8.0°
Polish Direction
Axis ±4° Max.
FC Connector Key
FC Connector Key
Type R - Narrow Key
(2.0 mm +0.02/-0.03 mm Key Width)
Angle Polished 8 ±0.5°
3 mm PVC
Coated Monocoil
Steel Tubing
8.0°
Polarization
±2° Max.
Laser Exit Aperture
View of Fiber from
Connector End
.20 mm ±0.10 mm
4X Ø3.2 mm Thru
(0.13 in.)
5 mm
(0.2 in.)
30 mm
(1.18 in.)
Top View
3 mm
(0.12 in.)
26
Superior Reliability & Performance
•
64 mm
(2.52 in.)
www.Coherent.com
•
[email protected]
OBIS FP
Fiber Pigtailed Lasers in a Plug-and-Play Platform
Mechanical Specifications
OBIS FP LS
Side View
Front
View
1.0m (minimum) (39.4 in.)
Rear
View
70 mm (2.76 in.)
OEM Label
37.9 mm
(1.49 in.)
5.1 mm
(0.2 in.)
40 mm
(1.57 in.)
5 mm
(0.2 in.)
FC Connector Key
Narrow Key
8° ±0.5°
Protective Tubing 5 mm (0.2 in.)
Minimum Bend Radius 51 mm (2 in.)
FC Connector Key
View of Fiber from
Connector End
Laser Exit Aperture
4 mm
(0.16 in.)
4X Ø3.2 mm Thru
(0.13 in.)
30 mm
(1.18 in.)
Top View
3 mm
(0.12 in.)
64 mm (2.52 in.)
Looking for OBIS Galaxy Lasers? Please refer to the OBIS Galaxy data sheet and/or web page.
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS Lasers. For full details of this warranty coverage, please refer to the Service section at
www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIB LASER PRODUCT.
350 nm to 1100 nm
<500 mW
Superior Reliability & Performance
ISO 9001 Registered
27
OBIS Galaxy
Fiber Input, Fiber Output, Eight Channel Beam Combiner
OBIS Galaxy Features:
The OBIS Galaxy is equipped with eight FC fiber inputs, and can easily accept any laser using a plug-and-play integration. Each input is optimized to accept the
fiber with a FC connection, and Coherent’s patented beam combining technology
integrates all eight inputs.
The OBIS Galaxy provides a fiber output of the combined eight lasers in a single-mode polarization-maintaining fiber, 2 meters in length, with a FC connector
for any customer application.
The OBIS Galaxy matches Coherent’s rigorous standards and advanced stress-testing benchmarks, offering the ease of plug-and-play integration and robustness,
and providing supe¬rior performance and reliability.
Fiber Output Power (mW)
OBIS Laser Family
OBIS Galaxy is a revolutionary design in laser technology, offering plug-and-play
capabilities in laser beam combining.
400
390
380
370
360
350
340
330
320
310
300
Example of the superior performance
over time of an OBIS Galaxy output
power with 6 lasers inputs (405 nm,
445 nm, 488 nm, 532 nm, 561 nm,
640 nm), totaling 510 mW input
power and 353 mW output power
(average 69% throughput efficiency)
0
50
100
150
200
250
•Plug-and-play eight input, single
output beam combiner
•Compact and low profile
•High transmission beam combiner
with typical 60% throuput per
channel
OBIS Galaxy Applications:
•Optogenetics
•Endoscopy
•Microscopy
•Cytometry
•Genomics
300
Operating Time (hrs)
www.Coherent.com/OBISGalaxy
28
Superior Reliability & Performance
OBIS Galaxy
Fiber Input, Fiber Output, Eight Channel Beam Combiner
System Specifications1
OBIS Galaxy
Eight Input Fiber Connections2 (nm) 405
445 or 458
488
514
532
552 or 561
590
640
Power Throughput3 (%)
(when used with Coherent Galaxy Compatible Lasers)
for 405 nm to 590 nm
for 640 nm
>45, Typical >60
>55, Typical >70
Maximum Power Per Channel (mW)
100
Maximum Total Output Power (mW)
<500
RMS Noise (%)(20 Hz to 2 MHz)
<0.5
Peak-to-Peak Noise (%)(20 Hz to 20 kHz)
<2
Fiber Connector Type (Input Connectors)
FC form-factor, ultra-flat contact FC/UFC with extended-life interface, anti-reflection (AR) coated tip
Polarization Extinction Ratio Loss (%)
<50
Long-term Power Throughput (%)(8 hours, ±3°C)
>95
Long-term Power Throughput (average)(%)
≤2/1000 hours
Output Fiber4
Fiber Connector Type5,6 (distal end)
FC/APC, 8° angled, with extended-life interface
Fiber Cable Type
3 mm mono-coil
Fiber Cable Length (m)(minimum)
2
Fiber Numerical Aperture (NA)(1/e2)
0.055
Fiber Core Diameter (μm)(typical)
3.8
Spatial Mode
TEM00
M2 (Beam Quality)7
≤1.1
Fiber Minimum Bend Radius
51 mm (2.0 in.)
Fiber Tensile Load (maximum)
1 kg (2.2 lbs.)
Fiber Connector Type6 (to OBIS Galaxy)
FC form-factor, ultra-flat contact FC/UFC with extended-life interface
Utility and Environmental Requirements
Dimensions
229 x 170 x 29 mm (9.0 x 6.7 x 1.1 in.)
Weight
1.4 kg (3 lbs.)
Shock Tolerance8 (g)(11 ms)
30
Vibration7 (g-RMS)(20 Hz to 2 kHz)
7.7
Ambient Temperature9
Operating Temperature
Storage Temperature
10 to 50°C (50 to 122°F)
-20 to 60°C (-4 to 140°F)
Laser Safety Classification10
Not Applicable
1
System specifications measured at 25°C.
2
All input channels require a ±1 nm center wavelength tolerance. Required wavelength tolerances specifically: 405 nm with 404 nm to 406 nm, 445 nm with 444 nm to 446 nm,
458 nm with 457 nm to 459 nm, 488 nm with 487 nm to 489 nm, 514 nm with 513 nm to 515 nm, 532 nm with 531 nm to 533 nm, 552 nm with 551.5 nm to 553.5 nm, 561 nm with
560.5 nm to 562.5 nm, 590 nm with 587 nm to 589 nm, 640 nm with 641 nm to 643 nm.
3
The Galaxy Beam Combiner as tested and certified will be >60% power transmission per wavelength as measured with production tooling fixtures.
4
The Output Fiber may be used in reverse as an input channel to air-launch a laser into the FC/APC connector.
5
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
6
Recommend changing Connector Type to Fiber Connector Type such to match the description used in System Specifications section.
7
M2 measured with ModeMaster with 90/10 Clip Levels.
8
Non-Operational with a before/after change of <10%.
9
Non-Condensing. Not hermetically sealed.
10
OBIS Galaxy is not a laser and therefore the Laser Safety Classification is determined by the end-user and application. Refer to CDRH 21 CFR 1040 subchapter J or IEC 60825-1.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
29
OBIS Galaxy
Fiber Input, Fiber Output, Eight Channel Beam Combiner
Accessories
OBIS Galaxy
Output Fiber1,2 (FC/UFC to FC/APC)
Part # 1254255
Part Numbers
Beam Combiner, Eight Input FC/UFC, Single Output
FC/APC, 405, 445, 488, 514, 532, 552, 590, 640 nm
Part # 1253553
Beam Combiner, Eight Input FC/UFC, Single Output
FC/APC, 405, 458, 488, 514, 532, 552, 590, 640 nm
Part # 1253554
Beam Combiner, Eight Input FC/UFC, Single Output
FC/APC, 405, 445, 488, 514, 532, 561, 590, 640 nm
Part # 1253555
Beam Combiner, Eight Input FC/UFC, Single Output
FC/APC, 405, 458, 488, 514, 532, 561, 590, 640 nm
Part # 1253556
1
2
Fiber Output Connector not compatible for patchcord-to-patchcord connection.
One Output Fiber included with each Galaxy Beam Combiner. The Output Fiber is installed at the factory.
Mechanical Specifications
for the Output Fiber (one included)
Side View
2m (minimum)
(78.7 in.)
FC/APC Distal End - Output
Polish Direction
Axis ±4° Maximum
8.0°
FC Connector Key
FC Connector Key
Type R - Narrow Key
(2.0 mm +0.02/-0.03 mm Key Width)
3 mm PVC
Coated Monocoil
Tubing
Polarization
±2° Max.
Laser Aperture
View of Fiber from
Connector End
FC/UFC Launch End - Input
3 mm PVC
Coated Monocoil
Tubing
FC Connector Key
Type R - Narrow Key
(2.0 mm +0.02/-0.03 mm Key Width)
FC Connector Key
Polish Direction
Not Applicable to
FC/UFC Connector
Polarization
±2° Max.
Laser Aperture
View of Fiber from
Connector End
30
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS Galaxy
Fiber Input, Fiber Output, Eight Channel Beam Combiner
225 mm (8.9 in.)
222.7 mm (8.8 in.)
Mechanical Specifications
Top View
OBIS Galaxy
225 mm225
(8.9mm
in.) (8.9 in.)
222.7
222.7 mm
(8.8mm
in.) (8.8 in.)
50 mm
(2.0 in.)
25.4 mm
(1.0 in.)
228.6 mm (9.0 in.)
169.6 mm
(6.7 in.)
50 mm 50 mm
(2.0 in.) (2.0 in.)
169.6 mm
169.6 mm
25.4 mm25.4(6.7
mm in.) (6.7 in.)
(1.0 in.) (1.0 in.)
OUTPUT
228.6 mm
(9.0mm
in.) (9.0 in.)
228.6
405 nm
445/458 nm
488 nm
640 nm
590 nm
Side View
552/561 nm
532 nm
OUTPUT
OUTPUT
514 nm
405 nm
405 nm
445/458 nm
29.1 mm (1.1 in.)
445/458 nm
488 nm
488 nm
640 nm
640 nm
590 nm
590 nm
552/561 nm
552/561 nm
532 nm
532 nm
514 nm
514 nm
Interior View1
29.1 mm29.1
(1.1mm
in.) (1.1 in.)
OUTPUT
405 nm
445/458 nm
488 nm
640 nm
590 nm
552/561 nm
532 nm
514 nm
FC/APC
1
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
All nine internal connections are FC/UFC.
Superior Reliability & Performance
31
OBIS Galaxy
Fiber Input, Fiber Output, Eight Channel Beam Combiner
Lasers for OBIS Galaxy
All lasers same as standard product except FC connector changed to UFC type.
OBIS FP LX Lasers for OBIS Galaxy
Part Number
OBIS 405 nm LX 50 mW Laser: Fiber Pigtail:UFC, Galaxy
1236438
OBIS 405 nm LX 100 mW Laser: Fiber Pigtail:UFC, Galaxy
1236439
OBIS 445 nm LX 45 mW Laser: Fiber Pigtail:UFC, Galaxy
1236441
OBIS 458 nm LX 45 mW Laser: Fiber Pigtail:UFC, Galaxy
1236442
OBIS 488 nm LX 30 mW Laser: Fiber Pigtail:UFC, Galaxy
1236443
OBIS 488 nm LX 100 mW Laser: Fiber Pigtail:UFC, Galaxy
1236444
OBIS 514 nm LX 30 mW Laser: Fiber Pigtail: UFC, Galaxy
1253198
OBIS 640 nm LX 75 mW Laser: Fiber Pigtail:UFC, Galaxy
1236445
OBIS FP LS Lasers for OBIS Galaxy
OBIS 532 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy 1276599
OBIS 552 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy 1275619
OBIS 561 nm LS 80 mW Laser: Fiber Pigtail: UFC, Galaxy 1275608
Sapphire FP Lasers for OBIS Galaxy
Sapphire 514-FP UFC OEM Laser System, 120 mW, Galaxy
1276125 Sapphire 532-FP UFC OEM Laser System, 120 mW, Galaxy
1276167 Sapphire 552-FP UFC OEM Laser System, 120 mW, Galaxy
1276186 Sapphire 561-FP UFC OEM Laser System, 120 mW, Galaxy
1276187 Sapphire 588-FP UFC OEM Laser System, 40 mW, Galaxy
1276188
OBIS FP LX Laser
OBIS FP LS Laser
Sapphire FP Laser
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IV LASER PRODUCT.
350 nm to 1100 nm
<500 mW
400 nm to 700 nm
<10W
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS Galaxy Beam Combiners. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
32
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LG
True CW, UV and Visible Lasers
OBIS LG Features:
The OPSL-based OBIS LG provides plug-and-play flexibility, which allows customers to integrate the product of their choice much faster, thereby reducing their
time-to-market costs. These true CW lasers deliver up to 50 mW in UV and 3W
in the Visible, making them ideal for applications like Flow Cytometry, Particle
Counting and Microscopy.
This, combined with a diffraction limited beam, low noise and high stability, provides unparalleled laser performance in the smallest package.
The OBIS LG is the perfect laser platform for customers requiring high performing
CW laser technology for research and instrumentation in life sciences and biological applications.
•Power invariant beam quality
•OBIS USB interface compatibility
•Integrated control electronics
OBIS Laser Family
Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology
powers the OBIS LG, featuring variable output powers without changing the
beam parameters.
OBIS LG Applications:
•Flow Cytometry
•Particle Counting
•DNA Sequencing
•Microscopy
www.Coherent.com/OBISLG
Superior Reliability & Performance
33
OBIS LG
True CW, UV and Visible Lasers
System Specifications1
OBIS LG 355-20
OBIS LG 355-50
OBIS LG 532-3000
532 ±3
Wavelength (nm)
355 ±2
355 ±2
FWHM Linewidgh (GHz)
<50
Pulse Format
CW
Spectral Purity (%)
>99
>20 >50
Spatial Mode
Output Power (mW)
TEM00
<1.2
Beam Circularity2
1.0 ± 0.15
Beam Quality (M2)
Beam Waist Diameter (mm)(FW, 1/e2)
>3000
<1.2
Beam Waist Location3 (mm)
±325
Beam Pointing Stability (µrad/°C)
<10
Polarization Ratio
Linear, >100:1
Polarization Direction
Vertical, ±5°
Noise (%, RMS)(10 Hz to 1 MHz)
<0.25
Power Stability (%)(pk-pk)
±1
CDRH Compliant4
No
Operating Voltage (VDC)
24 ±10%
Power Consumption (W)
<150
Ambient Temperature
Operating Non-Operating
10 to 40°C (50 to 104°F)
-10 to 60°C (-14 to 160°F)
Electrical Specifications
Environmental Conditions
Relative Humidity5 (%)
5 to 95
CE Marking
EN 61010/EN 60825/EN 61326
EN 55011/EN 5058
Dimensions (L x W x H)
Laser Head6
Power Supply7
125.0 x 70.0 x 36.2 mm (4.9 x 2.76 x 1.43 in.)
Cables (laser head to power supply7)
2m (6.5 ft.)
1
2
3
4
5
6
7
34
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside the laser head.
Ready to be integrated in compliant system.
Non-condensing.
Back connector not included in laser head length dimension.
Power supply not included.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LG
True CW, UV and Visible Lasers
Mechanical Specifications
Top View
Laser Head
55.8 mm
(2.2 in.)
Emission
Indicator
Side View
Rear View
Output Beam
36.3 mm
(1.43 in.)
Status
Indicators
Control
USB
25.9 mm
(1.02 in.)
Shutter Control
Fan
Bottom View
Front View
55.0 mm
(2.17 in.)
70.0 mm
(2.76 in.)
Mounting Holes
for 3 mm or No. 4 Screws
(4X)
115.0 mm
(4.53 in.)
125.0 mm
(4.92 in.)
Heat Sink Surface
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS LG lasers. For full details of this warranty coverage, please refer to the Service section
at www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.3 to 0.4
0.5 to 0.6
0.9 to 1.2
µm
µm
µm
Max. Power
495 mW
1 mW
1 mW
Superior Reliability & Performance
ISO 9001 Registered
35
BioRay
Elliptical Dot Laser
BioRay Features:
The BioRay provides the user with features aimed at provide the user with
options for easy integration via flexible electrical including RS-232 and Analog
power control, Coherent standard software interface, and focusable optics that
provide direct control over the beam properties.
• Self-contained power supply and drive electronics
• On-board modulation, communications and self-monitoring
• Closed loop independent power feedback
• Low wavelength drift, down to 0.05 nm/°C at 488
• High power stability across operating temperature range
•External focusability
•OBIS RS-232 interface
compatibility
•Analog modulation
BioRay Applications:
•Genetic Sequencing
•PCR
•High Throughput Drug Screening
•Hematology
•Medical Diagnostics
•Micro Array Scanners
•Flow Cytometry
BioRay OTC Power Stability
BioRay
OTC
Power
Stability
(405
nm/50
mW)
405 nm to 50 mW
10
39
Measured Power
Laser Temperature
5
34
29
0
24
19
-5
-10
14
0
100
200
300
Laser Temperature (°C)
Percent Change (%)
BioRay Laser Family
The Coherent BioRay suite of products offers superior technology in bioinstrumentation lasers for applications such as DNA research, new drug development,
fluid evaluation, and biological maintenance activities. Coherent laser technology
delivers unparalleled performance and reliability for a wide range of emerging
applications that require a cost-effective laser source in bioinstrumentation.
9
Time (minutes)
www.Coherent.com/BioRay
36
Superior Reliability & Performance
BioRay
Elliptical Dot Laser
System Specifications
BioRay-405
BioRay-450
BioRay-488
BioRay-520
BioRay-640
Wavelength1 (nm)
405
450
488
520
640
Wavelength Tolerance (±nm)
±3
±5
±2
±5
±3
0.06
0.06
0.03
0.06
0.20
50
50
20
50
40
TEM00
<1.5
Wavelength Drift (nm/°C)
Output Power (mW - Max. 2)
Spatial Mode
M2 (Beam Quality)(Average x,y3)
Beam Size4 (x, y)
2.3 x 1.2
2.4 x 0.8
2.5 x 1.2
2.6 x 1.1
2.6 x 1.4
Beam Divergence4 (mrad)(x, y)
0.5 x 0.5
0.4 x 0.8
0.4 x 0.6
0.4 x 0.7
0.4 x 0.7
200
160
Pointing Stability Over Temp. (µrad/°C)
<10
RMS Noise (%)(20 Hz to 20 MHz)
<0.5
Peak-­to-­Peak Noise (%)(20 Hz to 20 MHz)
<1
Long-term Power Stability (%)(8 hrs.,±3°C)
<2
Warm­-up Time (minutes)(from Cold Start)
<15
Laser Drive Modes
Analog
Analog Modulation
Maximum Bandwidth (KHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (%)
Linear Range (VDC)
500 (Constant Power)
<500
<500
100
0.5 to 5/0 to 4.5
Static Beam Alignment5 (degrees)
±5
Operating Voltage (VDC)
5 to 24
Operating Current (mA)-(Max. at 25°C)
100
160
85
Connector6
Hirose HR-10P-12S
Slow Start Delay7 (µsec.)
5
Input Impedance (kOhm)
1.5
Beam Angle (mrad)
<3
ESD Protection
Level 4
Heat Dissipation of Laser Head (W)(Max.)
5
Ambient Temperature
Operating Condition (°C)
Non­-operating Condition (°C)
15 to 40
-20 to 60
Shock Tolerance (g)(6 ms)
30
Mechanical Specifications
Weight (g)
<70
Length (mm)
95
Diameter (mm)
19.05
Material
1
2
3
4
5
6
7
Black annodized AL 6061 T1
Center Wavelength at 25°C.
Delivered power.
X = Fast Axis, Y = Slow Axis.
Typical value.
Slow axis aligned to the base plate.
Flying lead for OEM configuration.
If enabled.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
37
BioRay
Elliptical Dot Laser
Mechanical Specifications
Standard Configuration
Ø18.6 mm
(0.73 in.)
Hirose Plug
Top View
16.9 mm
(0.66 in.)
95.1 mm (3.74 in.)
Front View
31.6 mm
(1.24 in.)
1035 mm ± 25.4
(40.75 in. ±1.0)
36.3 mm (1.43 in.)
Clamping Area
External Focus
Adjustment Locking
34.3 mm
Set Screw (No.
2-56)
(1.35
in.)
Rear View
Indicator Light
Beam Exit
External Focus
Adjustment
19.1 mm
(0.75 in.)
15.5 mm
(0.61 in.)
Side View
14.4 mm
(0.57 in.)
13.8 mm
(0.5 in.)
31.4 mm
(1.24 in.)
Beam Exit
40.0 mm
(1.57 in.)
21.6 mm (0.9 in.)
Clamping Area
Ø19.05 mm (0.75 in.)
Clamping Area
50.8 mm (2.0 in.)
Cable LengthØ6.7 mm TYP.
2.3 mm (0.09 in.)
150 mm (5.9(0.27
in.) in.)
8.5 mm
(0.33 in.)
Ø18.64 mm
(0.73 in.)
2X 30.0 mm
(1.18 in.)
16.8 mm
(0.7 in.)
4X 35.9 mm
(1.41 in.)
Ø19.1 mm (0.75 in.)
Clamping Area
36.3 mm
(1.4 in.)
4X Ø3.2 mm
Clamping
(0.13 in.)
Area
52.9 mm
(2.1 in.)
Ø19.05 mm (0.75 in.)
Clamping Area
2X 5.0 mm
(0.2 in.)
68.2 mm
(2.7 in.)
0.5 m
(1.6 ft.)
Indicator Light
Bottom View
2X 64.0 mm (2.52 in.)
2X 3.0 mm
(0.12 in.)
OEM Configuration
27.2 mm
(1.1 in.)
70.0 mm (2.76 in.)
2X 3.2 mm (0.13 in.) x 4.4 mm (0.18 in.)
for No. 4-40 SHCS
External Focus
Adjustment Locking
Set Screw (No. 2-56)
25.4 mm
(1.0 in.)
Top
View
External Focus
Adjustment
Front View
7.9 mm (0.3 in.)
Rear View
Ø19.05 mm (0.75 in.)
Clamping Area
Cable Length
150 mm (5.9 in.)
Ø18.64 mm
(0.73 in.)
16.8 mm
(0.7 in.)
38.1 mm
(1.5 in.)
21.6 mm (0.9 in.)
Clamping Area
13.8 mm
(0.5 in.)
Beam Exit
2X No. 4-40
Side View
66.5 mm (2.6 in.)
0.5 m
(1.6 ft.)
52.9 mm
(2.1 in.)
31.8 mm
(1.3 in.)
12.2 mm
(0.5 in.)
Indicator Light
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
IEC 60825-1(2007)
Coherent offers a limited warranty for all BioRay lasers. For full details of this warranty coverage, please refer to the Service section at
www.Coherent.com or contact your local Sales or Service Representative.
INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
IEC 60825-1(2007)
38
Superior Reliability & Performance
•
www.Coherent.com
ISO 9001 Registered
•
[email protected]
BioRay FR
Multimode Fiber-Ready Laser
BioRay FR Features:
The Coherent BioRay suite of products offers superior technology in bioinstrumentation lasers for new applications like DNA research, new drug development,
fluid evaluation, and biological maintenance activities. Coherent laser technology
delivers unparalleled performance and reliability for a wide range of emerging
applications that require a cost-effective laser source in bioinstrumentation.
•All BioRay advantages
with fiber connector
The Coherent BioRay Fiber-Ready (FR) provides the user with features aimed at
provide the user with options for easy integration via flexible electrical including RS-232 and Analog power control, Coherent standard software interface and
focusable optics that provide direct control over the beam properties.
BioRay FR Applications:
• Pre-aligned SMA 905 mm fiber adapter
• Self-contained power supply and drive electronics
• On-board modulation, communications and self-monitoring
• Closed-loop independent power feedback
• Low wavelength drift, down to 0.05 nm/°C at 488
• High-coupling efficacy across operating temperature range
Normalized Output Power
•Genetic Sequencing
•PCR
•High Throughput Drug Screening
•Hematology
•Medical Diagnostics
•Micro Array Scanners
•Flow Cytometry
Output Power
Output
Variation
for 488-20 and
(50 Power
µm Core/0.22
NA Fiber)
50 µm Core/0.22 NA Fiber During OTC
1.05
1.03
1.01
0.99
0.97
0.95
0
1
2
3
4
5
6
Time (hours)
www.Coherent.com/BioRayFR
Superior Reliability & Performance
39
BioRay Laser Family
The Coherent BioRay FR suite of products is a stable, cost-effective line of diode
lasers that include the following:
•Compatible with customer provided multimode fibers
BioRay FR
Multimode Fiber-Ready Laser
System Specifications
BioRay FR-405
BioRay FR-450
BioRay FR-488
BioRay FR-520
BioRay FR-640
Wavelength1 (nm)
405
450
488
520
640
Wavelength Tolerance (±nm)
±3
±5
±2
±5
±3
0.06
0.06
0.03
0.06
0.20
200
160
Wavelength Drift (nm/°C)
Spatial Mode
Fiber Connector
TEM00
SMA 905
<0.5
RMS Noise (%)(20 Hz to 20 MHz)
Peak-­to-­Peak Noise (%)(20 Hz to 20 MHz)
<1
Long-term Power Stability (%)(8 hrs., ±3°C)
<2
Warm­-up Time (minutes)(from Cold Start)
<15
Laser Drive Modes
Analog
Analog Modulation
Maximum Bandwidth (KHz)
Rise Time (10% to 90%)(nsec)
Fall Time (90% to 10%)(nsec)
Modulation Depth (%)
Linear Range (VDC)
500 (Constant Power)
<500
<500
100
0.5 to 5/0 to 4.5
5 to 24
Operating Voltage (VDC)
Operating Current (mA)-(Max. at 25°C)
Laser Connector2
100
160
85
Hirose HR-10P-12S
Slow Start Delay3 (µsec.)
5
Input Impedance (kOhm)
1.5
ESD Protection
Level 4
Heat Dissipation of Laser Head (W)(Max.)
5
Ambient Temperature
Operating Condition (°C)
Non­-operating Condition (°C)
15 to 40
-20 to 60
Shock Tolerance (g)(6 ms)
30
Mechanical Specifications
Weight (g)
<80
Foot Print (L x W x H)
95 x 40 x 26 mm (3.7 x 1.6 x 1.0 in.)
Material
1
2
3
Black annodized AL 6061 T1
Center Wavelength at 25°C.
Flying lead for OEM configuration.
If enabled.
Coupling Efficiencies1
Typical coupling efficiencies that can be obtained with a step index core fiber, 0.22 NA, SMA/SMA, 1 meter (Coherent part number 1278782):
CE (%) =
Pfiber
x 100
Plaser
BioRay FR-405
BioRay FR-450
BioRay FR-488
BioRay FR-520
BioRay FR-640
Wavelength (nm)
405
450
488
520
640
Output Power (mW)
50
50
20
50
40
Typical Output Power2 (ex-fiber, mW)
35
35
15
35
30
72 to 75
72 to 75
75 to 78
77 to 80
80 to 83
0.22
50
Coupling Efficiencies (%)
Numerical Aperture3 (NA)(1/e2)
Minimum Core Diameter (µm)
1
2
3
40
These coupling efficiencies are not guaranteed and should only be used as guidelines.
Delivered power.
Typical value.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
BioRay FR
Multimode Fiber-Ready Laser
Mechanical Specifications
BioRay FR
Hirose Plug
Ø18.9 mm
(0.75 in.)
Top View
25.0 mm
(0.98 in.)
103.0 mm (4.06 in.)
1035 mm ±25.4
(40.75 in. ±1.0)
36.3 mm (1.43 in.)
Clamping Area
Front View
39.5 mm
(1.56 in.)
34.3 mm
(1.35 in.)
Rear View
Side View
Indicator Light
19.1 mm
(0.75 in.)
15.5 mm
(0.61 in.)
22.3 mm
(0.88 in.)
31.4 mm
(1.24 in.)
Ø19.1 mm
(0.75 in.)
40.0 mm
(1.57 in.)
4X 35.9 mm
(1.41 in.)
8.5 mm
(0.33 in.)
50.8 mm (2.0 in.)
Ø6.7 mm
(0.27 in.)
2.3 mm (0.09 in.)
2X 30.0 mm
(1.18 in.)
4X Ø3.2 mm
(0.13 in.)
2X 3.0 mm
(0.12 in.)
2X 5.0 mm
(0.2 in.)
BioRay FR
SMA 905 Connector
Bottom View
2X 64.0 mm (2.52 in.)
70.0 mm (2.76 in.)
9.812 mm (0.3863 in.)
9.779 mm (0.3850 in.) Post Polish Length
3.1725 mm (0.1249 in.)
Ø 3.1648 mm (0.1246 in.)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
IEC 60825-1(2007)
Coherent offers a limited warranty for all BioRay FR lasers. For full details of this warranty coverage, please refer to the Service section
at www.Coherent.com or contact your local Sales or Service Representative.
INVISIBLE LASER RADIATION
AVOID EXPOSURE TO BEAM
CLASS 3B LASER PRODUCT
IEC 60825-1(2007)
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
ISO 9001 Registered
41
Sapphire LP
CW Visible Lasers from Deep Blue to Orange
Sapphire LP Features:
The Coherent Sapphire LP is a series of compact CW visible lasers based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology. OPSL
technology delivers established legacy wavelengths of ion and diode-pumped
solid-state lasers, and its scalability allows for customized wavelengths to be
developed and tailored to a specific application.
•Power invariant beam quality
The Sapphire LP lasers are manufactured in clean rooms using Coherent’s patented PermAlign technology to deliver optimal aligning and solder bonding of the
optics. This patented technology results in an industry-best beam quality and
power stability as well as the lowest noise over the complete lifetime of the laser.
Sapphire LP Applications:
Sapphire Laser Family
The Sapphire LP lasers are provisioned with flexible interfaces including Analog,
RS-232, and USB, offering a choice of communication channels for every customer’s specific requirement. The Sapphire LP lasers deliver consistent superior performance, proven reliability, and low cost of ownership; making it the ideal laser solution for a variety of
applications including life sciences, environmental protection, semiconductor
inspection, and metrology.
•Output power up to 300 mW
•Industry-standard Sapphire footprint
•Flow Cytometry
•Confocal Microscopy
•Genomics & Proteomics
•High Throughput Drug Screening
•Medical Diagnostics
•Micro Array Scanning
•Semiconductor Inspection
•Metrology
www.Coherent.com/SapphireLP
42
Superior Reliability & Performance
Sapphire LP
CW Visible Lasers from Deep Blue to Orange
System Specifications
Sapphire 458 LP
Wavelength1 (nm) Output Power2 (mW)
Sapphire 488 LP
458 ±2 488 ±2
20, 50, 75
10, 20, 25, 30, 40, 50, 75, 100, 150, 200, 300
Spatial Mode
Beam Asymmetry TEM00, M2 <1.1
0.9 to 1.1
0.70 ±0.05 mm
Beam Diameter at 1/e2 Beam Divergence (mrad) <1.2
Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30
Noise (%)
20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25
<1
Long-term Power Stability (%)(2 hours, ±3°C) <2
Warm-up Time (minutes) <5
Polarization Ratio >100:1, vertical
Static Alignment Tolerances3
Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25
±2.5
±2004
Operating Voltage5 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temp.6 +50°C (122°F) +55°C (131°F), +50°C (122°F)7
Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C ) 25 (baseplate at 55°C/50°C)7
Utility and Environmental Requirements
Ambient Temperature
Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing
-30 to 60°C (-22 to 140°F)
Shock Tolerance (6 ms) 7g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)
117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.)
200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)
171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.)
2m (6.56 ft.), optional 5m (16.4 ft.)
Weights
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)
0.25 kg (0.55 lbs.)
0.75 kg (1.65 lbs.)
0.95 kg (incl. line cable)(2.1 lbs.)
1.7 kg (3.7 lbs.)
0.3 kg (0.66 lbs.)
Measurement Tools
Part Number
Meter FieldMax™II-TO 1098579
Sensor PS10Q 1098400
1
Laser-to-laser tolerance. With residual IR emission less than 0.1 mW.
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power.
3
Static alignment tolerances are relative to the right bottom edge (in beam direction).
4
200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm.
5
If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
6
With factory-provided or other adequate heat sink.
7
Sapphire 488-10/20/25/30 has a maximum baseplate temperature of +55°C (+131°F). Sapphire 488-40/50/75/100/150/200 and 300 mW models are limited to a maximum
baseplate temperature of +50°C (+122°F).
2
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
43
Sapphire LP
CW Visible Lasers from Deep Blue to Orange
System Specifications
Sapphire 514 LP
Wavelength1 (nm) Output Power2 (mW) Sapphire 532 LP
Sapphire 552 LP
514 ±2 532 ±2 552 ±2
20, 50, 75, 100, 150
20, 50, 75, 100, 150, 200, 300
50, 75, 100, 150, 200
Spatial Mode Beam Asymmetry Beam Diameter at 1/e2 TEM00, M2 <1.1
0.9 to 1.1
0.70 ±0.05 mm
Beam Divergence (mrad) <1.3
Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30
Noise (%)
20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25
<1
Long-term Power Stability (%)(2 hours, ±3°C) <2
Warm-up Time (minutes) <5
Polarization Ratio >100:1, vertical
Static Alignment Tolerances3
Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25
±2.5
±2004
Operating Voltage5 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temp.6 +50°C (122°F)
Utility and Environmental Requirements
Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C )
Ambient Temperature
Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing
-30 to 60°C (-22 to 140°F)
Shock Tolerance (6 ms) 7g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)
117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.)
200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)
171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.)
2m (6.56 ft.), optional 5m (16.4 ft.)
Weights
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)
0.25 kg (0.55 lbs.)
0.75 kg (1.65 lbs.)
0.95 kg (incl. line cable)(2.1 lbs.)
1.7 kg (3.7 lbs.)
0.3 kg (0.66 lbs.)
Measurement Tools
Meter FieldMax™II-TO 1098579
Sensor PS10Q 1098400
1
2
3
4
5
6
44
Part Number
Laser-to-laser tolerance. With residual IR emission less than 0.1 mW.
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power.
Static alignment tolerances are relative to the right bottom edge (in beam direction).
200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm.
If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
With factory-provided or other adequate heat sink.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Sapphire LP
CW Visible Lasers from Deep Blue to Orange
System Specifications
Sapphire 561 LP
Wavelength1 (nm) Output Power2 (mW) Sapphire 568 LP
Sapphire 588 LP
Sapphire 594 LP
561 ±2 568 ±2 588 ±2 594 ±2
20, 50, 75, 100, 150, 200, 300
50, 75, 100, 150, 200 20, 50, 75, 100 20, 50, 75
Spatial Mode Beam Asymmetry TEM00, M2 <1.1
0.9 to 1.1
0.70 ±0.05 mm
Beam Diameter at 1/e2 Beam Divergence (mrad) <1.3
Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30
Noise (%)
20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25
<1
Long-term Power Stability (%)(2 hours, ±3°C) <2
Warm-up Time (minutes) <5
Polarization Ratio >100:1, vertical
Static Alignment Tolerances3
Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25
±2.5
±2004
Operating Voltage5 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temp.6 +50°C (122°F)
Utility and Environmental Requirements
Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C )
Ambient Temperature
Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing
-30 to 60°C (-22 to 140°F)
Shock Tolerance (6 ms) 7g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)
117.8 x 76.2 x 30 mm (4.6 x 3.0 x 1.2 in.)
200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)
171 x 104 x 55 mm (6.7 x 4.1 x 2.2 in.)
2m (6.56 ft.), optional 5m (16.4 ft.)
Weights
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)
0.25 kg (0.55 lbs.)
0.75 kg (1.65 lbs.)
0.95 kg (incl. line cable)(2.1 lbs.)
1.7 kg (3.7 lbs.)
0.3 kg (0.66 lbs.)
Measurement Tools
Part Number
Meter FieldMax™II-TO 1098579
Sensor PS10Q 1098400
1
2
3
4
5
6
Laser-to-laser tolerance. With residual IR emission less than 0.1 mW.
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power.
Static alignment tolerances are relative to the right bottom edge (in beam direction).
200 mm is ~30% of Raleigh Range at 514/532/561/568 nm; 200 mm is ~25% of Raleigh Range at 458/488 nm.
If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
With factory-provided or other adequate heat sink.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
45
Sapphire LP
CW Visible Lasers from Deep Blue to Orange
Mechanical Specifications
Laser Head
Rear View
Controller
Beam Waist at Exit Window
[3 mm (0.12 in.) inside from here]
[±200 mm (7.9 in.)]
17.9 mm
(0.7 in.)
17.5 mm
(0.69 in.)
Beam
Exit
Side View
6.1 mm
(0.24 in.)
6.1 mm
(0.24 in.)
34 mm
(1.3 in.)
66 mm
(2.6 in.)
11 mm
(0.43 in.)
16.7 mm
(0.66 in.)
70 mm
(2.75 in.)
USB-Interface
Mini USB-Type B
5 pol
5 mm (0.2 in.)
10 mm (0.4 in.)
115.6 mm (4.5 in.)
120 mm (4.7 in.)
125 mm (4.9 in.)
Laser Head DSub-25 (female)
Top View
Top View
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section
at www.Coherent.com or contact your local Sales or Service Representative.
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.45 to 0.50
0.79 to 0.82
0.90 to 1.00
µm
µm
µm
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
Max. Power
150 mW
20 mW
50 mW
0.50 to 0.55
0.79 to 0.82
1.00 to 1.10
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.45 to 0.50
0.79 to 0.82
0.90 to 1.00
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.58 to 0.60
0.79 to 0.82
1.10 to 1.20
46
Superior Reliability & Performance
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
•
µm
µm
µm
λ
µm
µm
µm
λ
Max. Power
350 mW
20 mW
50 mW
0.54 to 0.57
0.79 to 0.82
1.10 to 1.20
Max. Power
480 mW
20 mW
50 mW
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
Max. Power
480 mW
20 mW
50 mW
www.Coherent.com
µm
µm
µm
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
0.45 to 0.50
0.79 to 0.82
0.90 to 1.00
76.2 mm
(3.0 in.)
117.8 mm (4.6 in.)
55 mm
(2.2 in.)
112.4 mm (4.4 in.)
45 mm
(1.8 in.)
7.5 mm
(0.3 in.)
102.9 mm (4.0 in.)
Position of Dowel Pins
(Beam Registering)
6 spacers with tapped thread
M4, UNC #8 or 5/32 BSW
6.35 mm 35 mm
are attached
(0.25 in.) (1.38 in.)
max.
app.
8.3 mm
Analog Interface
(0.327 in.)
DC Power Connector
26 pin-headertype AMP latch
Molex Micro Fit 3.0 10 positions
Tyco 281275-1
8.8 mm (0.345 in.)
Serial Interface
Fuse TE5 5A 127V Littlefuse 3961500000
DSub-9 (female)
20.4 mm
(0.8 in.)
62.6 mm (2.5 in.)
4 Holes Ø4.0 mm (0.16 in.)
for Screws M3, UNC/UNF No.5&6,
1/8-40 BSW/BSF or BA No.4&5
110 mm
(4.3 in.)
Front View
21.1 mm (0.8 in.)
15 mm
(0.6 in.)
19 mm
(0.75 in.)
35.3 mm (1.4 in.)
DC Supply for Fan
(AMP-MODU-2pin-male)
6 mm
(0.24 in.)
0 mm (0.0 in.)
LED
(Emission Indicator)
Interfacing Part (Heatsink) should have
flatness <0.05 mm (0.002 in.)
5.1 mm (0.2 in.)
Connection to Controller
(25pin SUB-D male)
0.55 to 0.58
0.79 to 0.82
1.10 to 1.20
•
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
[email protected]
Sapphire FP
Fiber Pigtailed Lasers from Deep Blue to Orange
Sapphire FP Features:
The Sapphire FP lasers are manufactured in clean rooms using Coherent’s patented PermAlign™ technology to deliver optimal aligning and solder bonding of the optics. The fiber is an integral part of the resonator and is completely independent of the outer housing.
Coherent’s proprietary fiber design allows operation at short wave¬lengths and/or high powers without fiber degradation or damage. As a result, Sapphire
FP lasers deliver excellent output stability, lowest noise and superior polarization
(PER) over a broad ambient temperature operating range (10°C to 40°C).
The Sapphire FP lasers are provisioned with flexible interfaces including Analog,
RS-232, and USB, offering a choice of communication channels for every customer’s specific requirement.
•All Sapphire advantages
with fiber delivery
•Single mode, polarization
maintaining fiber
•Extended life fiber design
Sapphire FP Applications:
•Confocal Microscopy
•Flow Cytometry
•Genomics & Proteomics
•High Throughput Drug Screening
•Medical Diagnostics
•Semiconductor Inspection
The Sapphire FP lasers find wide application in life sciences, metrology, and inspection where fluorescence-based techniques leverage fiber delivery to facilitate
miniaturization.
www.Coherent.com/SapphireFP
Superior Reliability & Performance
47
Sapphire Laser Family
The Coherent Sapphire FP is a series of true fiber-pigtailed lasers based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology. OPSL technology delivers established legacy wavelengths of ion and diode-
pumped solid-state lasers, and its scalability allows for customized wavelengths
to be developed and tailored to a specific application.
Sapphire FP
Fiber Pigtailed Lasers from Deep Blue to Orange
System Specifications
Sapphire 458 FP
Wavelength1 (nm) Output Power at Fiber Exit2 (mW) Sapphire 488 FP
458 ±2 488 ±2
40 40, 80, 120, 200
SM-PM3
Fiber Type Fiber Length (m) 1
Fiber Output FC/APC; 8° angled4
Spatial Mode Beam Asymmetry TEM00, M2 <1.1
<1:1.1
Noise (%)
RMS (20 Hz to 2 MHz) Peak-to-Peak Noise (20 Hz to 20 kHz) <0.25
<1
Long-term Power Stability (%)(2 hours, ±3°C) <2
Warm-up Time (min.) <5
Polarization Ratio >100:1, linear, vertical
Utility and Environmental Requirements
Laser Safety Classification 3b
Operating Voltage5 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temperature6 50°C/122°F
Max. Heat Dissipation of Laser Head (W) 25 (baseplate at 50°C/122°F)
Ambient Temperature
Operating Condition Non-Operating Condition 10 to 40°C/50 to 104°F
-20 to 60°C/-4 to 140°F
Humidity
Operating Condition Non-Operating Condition 0 to 95%, non-condensing
0 to 100%, non-condensing
Shock Tolerance (11 ms) 15g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 125 x 70 x 34 mm/4.9 x 2.8 x 1.3 in.
118 x 76 x 30 mm/4.6 x 3.0 x 1.2 in.
200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in.
171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in.
2m/6.56 ft. and options
Weights
Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 0.35 kg/0.77 lbs.
0.25 kg/0.55 lbs.
0.75 kg/1.65 lbs.
0.95 kg/2.1 lbs. incl. line cable
0.3 kg/0.66 lbs.
1
2
3
4
5
6
7
48
Laser-to-laser tolerance.
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
With factory-provided or other adequate heat sink.
Dimensions respectively weight without fiber-pigtail part.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Sapphire FP
Fiber Pigtailed Lasers from Deep Blue to Orange
System Specifications
Sapphire 514 FP
Wavelength1 (nm) Output Power at Fiber Exit2 (mW) Sapphire 532 FP
Sapphire 552 FP
514 ±2 532 ±2 552 ±2
40, 80, 120 40, 80, 120 40, 80, 120
SM-PM3
Fiber Type Fiber Length (m) 1
Fiber Output FC/APC; 8° angled4
TEM00, M2 <1.1
Spatial Mode Beam Asymmetry Noise (%)
RMS (20 Hz to 2 MHz) Peak-to-Peak Noise (20 Hz to 20 kHz) <0.25
<1
<2
<1:1.1
Long-term Power Stability (%)(2 hours, ±3°C) Warm-up Time (min.) <5
Polarization Ratio >100:1, linear, vertical
Utility and Environmental Requirements
Laser Safety Classification 3b
Operating Voltage5 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temperature6 50°C/122°F
Max. Heat Dissipation of Laser Head (W) 25 (baseplate at 50°C/122°F)
Ambient Temperature
Operating Condition Non-Operating Condition 10 to 40°C/50 to 104°F
-20 to 60°C/-4 to 140°F
Humidity
Operating Condition Non-Operating Condition 0 to 95%, non-condensing
0 to 100%, non-condensing
Shock Tolerance (11 ms) 15g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 125 x 70 x 34 mm/4.9 x 2.8 x 1.3 in.
118 x 76 x 30 mm/4.6 x 3.0 x 1.2 in.
200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in.
171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in.
2m/6.56 ft. and options
Weights
Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 0.35 kg/0.77 lbs.
0.25 kg/0.55 lbs.
0.75 kg/1.65 lbs.
0.95 kg/2.1 lbs. incl. line cable
0.3 kg/0.66 lbs.
1
2
3
4
5
6
7
Laser-to-laser tolerance.
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
With factory-provided or other adequate heat sink.
Dimensions respectively weight without fiber-pigtail part.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
49
Sapphire FP
Fiber Pigtailed Lasers from Deep Blue to Orange
System Specifications
Sapphire 561 FP
Sapphire 588 FP
Sapphire 594 FP
Wavelength1 (nm) 561 ±2 588 ±2 594 ±2
40, 80, 120, 200 40 40
Fiber Type SM-PM3
Fiber Length (m) 1
Fiber Output FC/APC; 8° angled4
Output Power at Fiber Exit2 (mW) TEM00, M2 <1.1
Spatial Mode Beam Asymmetry Noise (%)
RMS (20 Hz to 2 MHz) Peak-to-Peak Noise (20 Hz to 20 kHz) <0.25
<1
<2
<1:1.1
Long-term Power Stability (%)(2 hours, ±3°C) Warm-up Time (min.) <5
Polarization Ratio >100:1, linear, vertical
Utility and Environmental Requirements
Laser Safety Classification 3b
Operating Voltage5 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temperature6 50°C/122°F
Max. Heat Dissipation of Laser Head (W) 25 (baseplate at 50°C/122°F)
Ambient Temperature
Operating Condition Non-Operating Condition 10 to 40°C/50 to 104°F
-20 to 60°C/-4 to 140°F
Humidity
Operating Condition Non-Operating Condition 0 to 95%, non-condensing
0 to 100%, non-condensing
Shock Tolerance (11 ms) 15g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 125 x 70 x 34 mm/4.9 x 2.8 x 1.3 in.
118 x 76 x 30 mm/4.6 x 3.0 x 1.2 in.
200 x 80 x 50 mm/7.9 x 3.2 x 2.0 in.
171 x 104 x 55 mm/6.7 x 4.1 x 2.2 in.
2m/6.56 ft. and options
Weights
Laser Head7 Controller Heat Sink (optional) DC Power Supply (optional) Cable Laser Head to Controller 0.35 kg/0.77 lbs.
0.25 kg/0.55 lbs.
0.75 kg/1.65 lbs.
0.95 kg/2.1 lbs. incl. line cable
0.3 kg/0.66 lbs.
1
2
3
4
5
6
7
50
Laser-to-laser tolerance.
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power.
Single-mode, polarization maintaining fiber, bending radius min. 50 mm.
Fiber FC/APC connector output not compatible for patchcord-to-patchcord connection.
If user-supplied, the DC power supply has to meet the following requirements: power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
With factory-provided or other adequate heat sink.
Dimensions respectively weight without fiber-pigtail part.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Sapphire FP
Fiber Pigtailed Lasers from Deep Blue to Orange
Mechanical Specifications
Laser Head
Controller
Front View
Side View
Side View
6.1 mm
(0.24 in.)
6.1 mm
(0.24 in.)
6 mm
(0.24 in.)
6 spacers with tapped thread
M4, UNC #8 or 5/32 BSW
6.35 mm 35 mm
are attached
(0.25 in.) (1.38 in.)
max.
app.
8.3 mm
Analog Interface
(0.327 in.)
DC Power Connector
26 pin-headertype AMP latch
Molex Micro Fit 3.0 10 positions
Tyco 281275-1
8.8 mm (0.345 in.)
Serial Interface
Fuse TE5 5A 127V Littlefuse 3961500000
DSub-9 (female)
19 mm
(0.75 in.)
125 mm (4.92 in.)
115 mm (4.53 in.)
40.5 mm (1.59 in.)
5 mm
(0.2 in.)
66 mm
(2.6 in.)
11 mm
(0.43 in.)
16.7 mm
(0.66 in.)
102.9 mm (4.0 in.)
62.6 mm (2.5 in.)
21.1 mm (0.8 in.)
Laser Head DSub-25 (female)
35.3 mm (1.4 in.)
Top View
USB-Interface
Mini USB-Type B
5 pol
0 mm (0.0 in.)
Ø6.2 mm
(0.24 in.)
76.2 mm
(3.0 in.)
112.4 mm (4.4 in.)
55 mm (2.17 in.)
70 mm (2.76 in.)
7.5 mm
(0.3 in.)
20.4 mm
(0.8 in.)
117.8 mm (4.6 in.)
Front View
5.1 mm (0.2 in.)
34 mm
(1.34 in.)
17.9 mm
(0.7 in.)
Top View
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section
at www.Coherent.com or contact your local Sales or Service Representative.
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.45 to 0.50
0.79 to 0.82
0.90 to 1.00
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.50 to 0.55
0.79 to 0.82
1.00 to 1.10
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.54 to 0.57
0.79 to 0.82
1.08 to 1.14
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.56 to 0.58
0.79 to 0.82
1.10 to 1.16
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.58 to 0.60
0.79 to 0.82
1.10 to 1.20
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
Superior Reliability & Performance
51
Sapphire SF
CW Blue and Green Single-Frequency Lasers
Sapphire SF Features:
The Coherent Sapphire SF is a series of compact CW visible single-frequency
lasers based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL)
technology. OPSL technology delivers established legacy wavelengths of ion and
diode-pumped solid-state lasers, and its scalability allows for customized wavelengths to be developed and tailored to a specific application. The Sapphire SF lasers are manufactured in clean rooms using Coherent’s patented PermAlign™ technology to deliver optimal aligning and solder bonding of
the optics. This patented technology results in an industry-best beam quality and
power stability as well as the lowest noise over the complete lifetime of the laser.
•Ultra-low noise
•Ultra-narrow linewidth
Sapphire SF Applications:
•Raman spectroscopy
•Holography
•Metrology
•Inspection
Sapphire SF 488 overcomes the disadvantages of ion lasers (size, power consumption, background light, cost of ownership) and diode lasers (beam quality, wavelength precision).
The Sapphire SF 532 is a technologically superior alternative to Nd:YAG or Nd:YVO4 based lasers; eliminat¬ing thermal lensing and green noise effects, and power instability caused by intra cavity frequency-doubling mechanisms.
The Sapphire SF lasers are intended for applications that need narrow and ultra-
narrow linewidth light such as Raman spectroscopy, interferometry, holography,
metrology, and inspection.
458.9
1000
400
200
440
452.1
600
0
High Resolution
Raman Spectra
455.7
800
C
462.1
1200
448.6
Raman Intensity (arb. units)
Sapphire Laser Family
The Sapphire SF lasers are provisioned with flexible interfaces including Analog,
RS-232, and USB, offering a choice of communication channels for every customer’s specific requirement.
•All Sapphire advantages with
single-frequency linewidth
450
460
470
480
Wavenumber (cm-1)
www.Coherent.com/SapphireSF
52
Superior Reliability & Performance
Sapphire SF
CW Blue and Green Single-Frequency Lasers
System Specifications
Sapphire 488 SF
Wavelength (nm) Wavelength Accuracy (nm) Single-longitudinal Mode, Linewidth (MHz) Output Power1 (mW) 488 0.1
<1.5
20, 50, 100 Beam Diameter at 1/e2 (mm) TEM00, M2 <1.1, single longitudinal mode
0.9 to 1.1
0.70 ±0.05
Beam Divergence (mrad) <1.3
Pointing Stability (over 2 hours after warm-up and ±3°C)(μrad) <30
Noise (%)
20 Hz to 2 MHz, rms 20 Hz to 20 kHz, peak-to-peak <0.25
<1
Long-term Power Stability (%)(2 hours, ±3°C) <2
Warm-up Time (minutes) <5
Polarization Ratio >100:1, vertical
Static Alignment Tolerances2
Beam Position (mm) Beam Angle (mrad) Beam Waist Position with respect to Exit Window ±0.25
±2.5
±2003
Interfacing Analog, RS-232, USB
Operating Voltage4 (VDC) +10.8 to 15
Power Consumption (W) <60
Max. Laser Head Baseplate Temp.5 +50°C (122°F)
Max. Heat Dissipation of Head (W) 25 (baseplate at 50°C)
Ambient Temperature
Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F) non-condensing
-30 to 60°C (-22 to 140°F)
Shock Tolerance (6 ms) 7g laterally, 15g vertically
Dimensions (L x W x H)
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Cable — Laser Head to Controller 125 x 70 x 34 mm (4.9 x 2.8 x 1.3 in.)
117.8 x 76.2 x 43.2 mm (4.6 x 3.0 x 1.7 in.)
200 x 80 x 50 mm (7.9 x 3.2 x 2 in.)
172 x 105 x 55 mm (6.8 x 4.1 x 2.2 in.)
2m (6.56 ft.), optional 5m (16.4 ft.)
Weights
Laser Head Controller Heat Sink (optional) DC Power Supply (optional) Packaged System (head+controller+cable+manual) Cable — Laser Head to Controller 0.35 kg (0.77 lbs.)
0.25 kg (0.55 lbs.)
0.75 kg (1.65 lbs.)
0.95 kg (incl. line cable)(2.1 lbs.)
1.7 kg (3.7 lbs.)
0.3 kg (0.66 lbs.)
Spatial Mode Beam Asymmetry Sapphire 532 SF
532
20, 50, 100, 150
Utility and Environmental Requirements
Measurement Tools
Part Number
Meter FieldMax™II-TO 1098579
Sensor PS10Q 1098400
1
2
3
4
5
Output power is adjustable via analog or digital interface from 10% to 110%. Specifications are valid for 100% power. Recommended power range is 70 to 110% power.
Static alignment tolerances are relative to the right bottom edge (in beam direction).
200mm is ~25% of Raleigh Range at 488 nm and ~30% of Raleigh Range at 532 nm.
If user-supplied, the DC power supply has to meet the following requirements: Power >60W; ripple <5% peak-to-peak; line regulation <0.5%.
With factory-provided or other adequate heat sink.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
53
Sapphire SF
CW Blue and Green Single-Frequency Lasers
Mechanical Specifications
Laser Head
Rear View
Controller
Beam Waist at Exit Window
[3 mm (0.12 in.) inside from here]
[±200 mm (7.9 in.)]
17.9 mm
(0.7 in.)
Side View
Side View
17.5 mm
(0.69 in.)
Beam
Exit
34 mm
(1.3 in.)
Connection to Controller
(25pin SUB-D male)
LED
(Emission Indicator)
Interfacing Part (Heatsink) should have
flatness <0.05 mm (0.002 in.)
DC Supply for Fan
(AMP-MODU-2pin-male)
15 mm
(0.6 in.)
4 Holes Ø4.0 mm (0.16 in.)
for Screws M3, UNC/UNF No.5&6,
1/8-40 BSW/BSF or BA No.4&5
110 mm
(4.3 in.)
Position of Dowel Pins
(Beam Registering)
45 mm
(1.8 in.)
6 mm
(0.24 in.)
19 mm
(0.75 in.)
Front View
7.5 mm
(0.3 in.)
117.8 mm
(4.64 in.)
14.2 mm
(0.56 in.)
43.2 mm
(1.7 in.)
97.8 mm
(3.85 in.)
5.9 mm
(0.23 in.)
66 mm
(2.6 in.)
55 mm
(2.2 in.)
4X M4
3.5 mm
(0.14 in.)
76.2 mm
(3.0 in.)
70 mm
(2.75 in.)
Top View
5 mm (0.2 in.)
10 mm (0.4 in.)
115.6 mm (4.5 in.)
120 mm (4.7 in.)
125 mm (4.9 in.)
Top View
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section
at www.Coherent.com or contact your local Sales or Service Representative.
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.45 to 0.50
0.79 to 0.82
0.90 to 1.00
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
λ
0.50 to 0.55
0.79 to 0.82
1.00 to 1.10
54
Superior Reliability & Performance
•
µm
µm
µm
Max. Power
480 mW
20 mW
50 mW
www.Coherent.com
•
[email protected]
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology
powers the Genesis CX-STM Series, providing up to 250 mW of UV laser light or
up to 10W of visible laser light from either OEM or CDRH-compliant end-user
systems.
Ideal for applications such as Flow Cytometery, Particle Counting, DNA Sequencing and Microscopy, these lasers provide a TEM00 power invariant beam with low
noise and high stability in a convenient package.
The Genesis CX STM-Series is the perfect laser platform for customers requiring
high-performing CW laser technology for research and instrumentation in life
science and biological applications.
Genesis CX STM-Series
Features:
•Single transverse mode (TEM00)
•OEM or end-user versions
•Air or water-cooled solutions
•Power invariant beam quality
Genesis CX STM-Series
Applications:
•Flow Cytometry
•Particle Counting
•DNA Sequencing
Genesis Laser Family
•Microscopy
www.Coherent.com/GenesisCX_STM-Series
Superior Reliability & Performance
55
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Genesis
CX 3551
Optical Specifications2
Wavelength (nm) 355 ±2
FWHM Linewidth (GHz) <50
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW) 40, 60, 80, 100, 150, 200, 250
Spatial Mode TEM00
Beam Quality (M2) Beam Circularity3 <1.2
Beam Waist Diameter (mm)(FW, 1/e2)
Horizontal Vertical 1.0 ±0.1
0.975 ±0.2
0.915 ±0.2
<1.2
Beam Waist Location4 (mm) ±325
Beam Divergence (mrad)(FW, 1/e2) Beam Pointing Stability5 (μrad/°C) <6
Horizontal Beam Position Tolerance (mm) ±<1.0
±<1.0
Vertical Beam Position Tolerance (mm) Beam Pointing Tolerance (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise (%, rms)(10 Hz to 1 MHz) <0.1
Power Stability (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 5008
Ambient Temperature (°C)
Operating Non-operating 10 to 40
-10 to 60
Electrical Specifications
Environmental Conditions
Relative Humidity6 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head7 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
56
Available in OEM or end user versions.
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After warm-up over 2 hours.
Non-condensing.
Back connector not included in laser head length dimension.
Power consumption for the CX 355-250 is 600W.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Optical Specifications2
Genesis
CX 4601
Genesis
CX 4801
Wavelength (nm)
460 ±3
480 ±3
FWHM Linewidth (GHz) Genesis
CX 4881 Genesis
CX 5141
488 ±3
514 ±3
2000, 4000
2000, 4000
<30
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW) 1000
Spatial Mode Beam Quality Beam Circularity3 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) 1000, 2000
TEM00
<1.1
1.0 ±0.1
2.25 ±10%
<0.5
±0.5
Beam Pointing Stability5 (μrad/°C) <2
Horizontal Beam Position Tolerance6 (mm) ±<1.0
Vertical Beam Position Tolerance6 (mm) ±<1.0
Beam Pointing Tolerance6 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Horizontal, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability7 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-operating 10 to 40
-10 to 60
Environmental Conditions
Relative Humidity8 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
9
Available in OEM or end user versions.
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
57
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Optical Specifications2
Wavelength (nm)
Genesis
CX 5321
Genesis
CX 532 Genesis
CX 561
Genesis
CX 5771
Genesis
CX 590
577 ±3
590 ±3
1000, 2000,
1000, 2000
3000
500
500
532 ±3
532 ±3
561 ±3
FWHM Linewidth (GHz) <30
Pulse Format CW
Spectral Purity (%) >99
2000, 4000, 5000,
6000, 7000
8000,
10,000
3000
TEM00
<1.1
Output Power (mW) Spatial Mode Beam Quality Beam Circularity3 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) 1.0 ±0.1
2.25 ±10%
<0.5
±0.5
Beam Pointing Stability5 (μrad/°C) <2
Horizontal Beam Position Tolerance6 (mm) ±<1.0
Vertical Beam Position Tolerance6 (mm) ±<1.0
Beam Pointing Tolerance6 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Horizontal, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability7 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Operating Voltage (VAC)
100 to 240
Frequency (Hz) 50 to 60
500 700
700
10 to 40
-10 to 60
Electrical Specifications
Power Consumption (W) Environmental Conditions
Ambient Temperature (°C)
Operating Non-operating Relative Humidity8 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
9
58
Available in OEM or end user versions.
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis CX-Series
High Current OEM Power Supply
Top View
208.28 mm
(8.2 in.)
Side View
96.52 mm
(3.8 in.)
Front View
Rear View
Bottom View
299.72 mm
(11.8 in.)
Genesis CX-Series
Benchtop Power Supply
Front View
Side View
228.9 mm
(9.01 in.)
361.1 mm
(14.22 in.)
159.8 mm
(6.29 in.)
19.8 mm
(0.78 in.)
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
59
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis CX STM-Series
532-10000
Power
Indicator
Lamp
Shutter
Top View
Output Beam
Side View
Front
View
Rear View
Ground
87.12 mm
44.75 mm (3.43 in.)
(1.76 in.)
52.85 mm
(2.08 in.)
9.53 mm (0.38 in.)
221.77 mm
26.97 mm
(8.73 in.)
(1.06 in.)
2.03 mm
280.57 mm (0.08 in.)
(11.05 in.)
6.375 mm (0.251 in.) Dia.
x 7.92 mm (0.31 in.) Deep
Alignment Pin Hole
10.0 mm
(0.39 in.)
156.06 mm
(6.14 in.)
5.56 mm
(0.22 in.)
Control
DC Power In
52.85 mm
(2.08 in.)
147.32 mm
(5.8 in.)
4.78 mm (0.188 in.) Dia.
Mounting Screw Holes
6 Places
27.0 mm
(1.06 in.)
41.28 mm
(1.63 in.)
60
6.375 mm (0.251 in.) Wide
x 7.92 mm (0.31 in.) Deep
Alignment Pin Slot
Bottom
View
115.25 mm
(4.54 in.)
139.73 mm
(5.5 in.)
189.23 mm
(7.45 in.)
Superior Reliability & Performance
•
Cooling Surface
www.Coherent.com
•
[email protected]
Genesis CX STM-Series
TEM00 UV and Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis CX STM-Series
OEM and End User
Laser Head – Top View
280.67 mm
(11.05 in.)
4.78 mm Dia. Thru
C’Bore 7.92 mm Dia.
X 4.83 mm Deep
(0.188 Dia. Thru
C’Bore 0.312 in. Dia.
X 0.19 in. Deep)
(6X)
19.38 mm
(0.76 in.)
Laser Head – Front View
Power On Indicator
137.26 mm
(5.4 in.)
Manual Shutter
10.0 mm
(0.39 in.)
165.38 mm (6.51 in.)
Laser Head – Side View
Min. Bend Radius
127 mm
(5.0 in.)
Laser Head – Rear View
280.67 mm
(11.05 in.)
Control
Fan
Aux.
Output
Beam
84.51 mm
(3.33 in.)
44.75 mm
(1.76 in.)
11.94 mm
(0.47 in.)
156.06 mm
(6.14 in.)
80 mm
(3.15 in.)
52.85 mm
(2.08 in.)
DC Power
Ground Lug
Laser Head – Bottom View
Slot 6.38 +0.03/-0.00 mm Wide X 9.7 mm Deep
(0.251 +0.001/-0.00 in. Wide X 0.38 in. Deep
20.65 mm
(0.81 in.)
133.38 mm
(5.25 in.)
144.93 mm
(5.71 in.)
Heatsink Surface
156.06 mm
(6.14 in.)
0.0 mm
(0.0 in.)
34.93 mm
(1.38 in.)
182.88 mm
(7.2 in.)
280.57 mm
(11.05 in.)
5.56 mm
(0.22 in.)
108.9 mm
(4.29 in.)
6.38 +0.03/-0.00 mm Dia. X 9.7 mm Deep
(0.251 +0.001/-0.00 in. Dia. X 0.38 in. Deep
47.28 mm
(1.86 in.)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
ISO 9001 Registered
Coherent offers a limited warranty for all Genesis CX STM-Series lasers. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
61
Genesis CX 355 STM
Compact (OEM)
TEM00 355 nm OEM OPS Laser Systems
Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology
powers the Genesis CX-STM Compact, providing up to 100 mW of 355 nm laser
light from an OEM system.
Ideal for applications such as Flow Cytometery and Particle Counting, these lasers provide a TEM00 power invariant beam with low noise and high stability in a simple-to-integrate, air-cooled package.
The Genesis CX STM Compact is the perfect laser platform for customers requiring easy integration of high-performing CW laser technology into life science and bioinstrumentation.
Genesis CX 355 STM Compact (OEM)
Features:
•Single transverse mode (TEM00)
•Reduced sized OEM
•Air-cooled solution
Genesis CX 355 STM Compact (OEM)
Applications:
•Flow Cytometry
•Particle Counting
Genesis Laser Family
•Microscopy
www.Coherent.com/GenesisCX355STM
62
Superior Reliability & Performance
Genesis CX 355 STM Compact (OEM)
TEM00 355 nm OEM OPS Laser Systems
Genesis
CX 355
Optical Specifications1
Wavelength (nm) 355 ±2
FWHM Linewidth (GHz) <50
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW)
40, 60, 80, 100
Spatial Mode TEM00
Beam Quality (M2) Beam Circularity2 <1.2
Beam Waist Diameter (mm)(FW, 1/e2)
Horizontal Vertical 1.0 ±0.1
0.975 ±0.2
0.915 ±0.2
<1.2
Beam Waist Location3 (mm) ±325
Beam Divergence (mrad)(FW, 1/e2) Beam Pointing Stability4 (μrad/°C) <6
Horizontal Beam Position Tolerance (mm) ±<1.0
±<1.0
Vertical Beam Position Tolerance (mm) Beam Pointing Tolerance (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Horizontal, ±5°
Noise (%, rms)(10 Hz to 1 MHz) <0.1
Power Stability (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-operating 10 to 40
-10 to 60
Relative Humidity5 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head6 Cables (laser head to controller) 250.1 x 138.0 x 50.8 mm (9.84 x 5.4 x 2.0 in.)
2m (6.5 ft.)
Electrical Specifications
Environmental Conditions
1
2
3
4
5
6
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After warm-up over 2 hours.
Non-condensing.
Back connector not included in laser head length dimension.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
63
(4.36 in.)
234.19 mm
(9.22 in.)
7.95 mm
(0.31 in.)
30.15 mm
50.75 mm (1.19 in.)
(2.0 in.)
Genesis CX 355 STM Compact (OEM)
9.53 mm
(0.375 in.)
31.75 mm
(1.25 in.)
TEM00 355 nm OEM OPS Laser Systems
Mechanical Specifications
Genesis CX Compact Controller
Front View
Side View
RS232D SERIAL PORT
MOUNTING HOLES ARE
BOTH NEAR AND FARSIDE
24V IN
Rear View
DIODE OUT
USB 2
77.65 mm
(3.06 in.)
6-32
42.16 mm
(1.66 in.)
18.34 mm
(0.72 in.)
0
6-32
0
0
52.37 mm
(2.06 in.)
68.58 mm
(2.70 in.)
USB 1
188.57 mm
(7.42 in.)
INTERLOCK
204.77 mm
(8.06 in.)
0
GND
127.0 mm
(5.0 in.)
M3
0
M3
21.16 mm
(0.833 in.)
6-32
0
.600
16.0 mm
(0.63 in.)
6-32
.630
M3
M3
15.24 mm
(0.60 in.)
6-32
MOUNTING HOLES (BOTTOM)
6-32
Top View
111.76 mm
(4.40 in.)
0
M3
52.37 mm
(2.06 in.)
111.0 mm
(4.37 in.)
68.58 mm
(2.70 in.)
M3
188.57 mm
(7.42 in.)
204.77 mm
(8.06 in.)
269.85 mm
(10.62 in.)
260.78 mm
(10.27 in.)
111.76 mm
(4.40 in.)
6-32
111.0 mm
(4.37 in.)
Top View
4-M4
Mounting Hole
20 ±0.5 12
Genesis CX-Series Optional
AC/DC Power Supply
54
74±0.5
Rear View
M4
Terminal cover
Side View
25max
102
(75)
(87)
12
50.5
12
(23.5)
Output terminal(+ )
H
V.ADJ
M4
Front
View
2-M4
Mounting Hole
(Bottom sides)
10 7
8.6
(50)
AC(L)
AC(N)
FG( )
Output terminal(- )
Name plate
(6)
(14)
(15.5)
(30)
CN3
CN2
Name plate
CN1
LED
Output voltage
adjustable potentiometer
28.5
64±0.5
170
6max
Bottom View
42
AIR FLOW
64
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis CX 355 STM Compact (OEM)
TEM00 355 nm OEM OPS Laser Systems
Mechanical Specifications
Genesis CX 355 STM Compact (OEM)
Rear View
Side View
138.33 mm
(5.446 in.)
95.38 mm
(3.755 in.)
287.32 mm
(11.31 in.)
110.74 mm
(4.36 in.)
Front View
OUTPUT BEAM
20.96 mm
(0.825 in.)
234.19 mm
(9.22 in.)
7.95 mm
(0.31 in.)
30.15 mm
50.75 mm (1.19 in.)
(2.0 in.)
9.53 mm
(0.375 in.)
31.75 mm
(1.25 in.)
Top View
RS232D SERIAL PORT
MOUNTING HOLES ARE
BOTH NEAR AND FARSIDE
24V IN
DIODE OUT
USB 2
77.65 mm
(3.06 in.)
42.16 mm
(1.66 in.)
18.34 mm
(0.72 in.)
0
0
52.37 mm
(2.06 in.)
68.58 mm
(2.70 in.)
USB 1
188.57 mm
(7.42 in.)
INTERLOCK
204.77 mm
(8.06 in.)
0
0
6-32
GND
127.0 mm
(5.0 in.)
6-32
21.16 mm
(0.833 in.)
M3
0
M3
6-32
0
.600
16.0 mm
(0.63 in.)
M3
6-32
.630
M3
15.24 mm
(0.60 in.)
6-32
MOUNTING HOLES (BOTTOM)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
(4.37 in.)
M3
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
68.58 mm
(2.70 in.)
188.57 mm
(7.42 in.)
204.77 mm
(8.06 in.)
260.78 mm
(10.27 in.)
269.85 mm
(10.62 in.)
Coherent offers a limited warranty for all Genesis CX-Series lasers. For full details of this warranty coverage, please refer to the Service
section at www.Coherent.com or contact your local Sales or Service Representative.
•
ISO 9001 Registered
6-32
111.76 mm
(4.40 in.)
0
6-32
52.37 mm
(2.06 in.)
mm
Coherent’s scientific and industrial lasers are certified to comply with the111.76
Federal Regulations
(21 CFR Subchapter
as administered
111.0 J)mm
M3
by the Center for Devices and Radiological Health
on all
systems ordered for
shipment
(4.40
in.) after August 2, 1976.(4.37 in.)
111.0
mm
Superior Reliability & Performance
65
Genesis CX SLM-Series
Single Frequency UV and Visible OEM and End-User
OPS Laser Systems
Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enabled by true CW lasers with low noise in the UV and visible.
The Genesis CX SLM-Series provides up to 100 mW of UV laser light or up to 4W
of visible laser light from either a simple, CDRH-compliant turn-key system or an easy-to-integrate air-cooled or water-cooled package.
Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL) technology, the Genesis CX SLM-Series features single-frequency operation for
the most demanding of applications. This, combined with stable beam parameters across output powers, a diffraction limited beam, lowest noise and high
stability, provides unparalleled laser performance in a convenient package.
•All Genesis CX advantages with
single-frequency output
•OEM or end-user versions
•Air or water-cooled solutions
Genesis CX SLM-Series
Applications:
•Flow Cytometry
•Particle Counting
•DNA Sequencing
•Microscopy
Genesis Laser Family
Genesis CX SLM-Series is the perfect match for customers in need of the highest
performing CW laser technology for research and instrumentation in life science
and biological applications.
Genesis CX SLM-Series Features:
www.Coherent.com/GenesisCX_SLM-Series
66
Superior Reliability & Performance
Genesis CX SLM-Series
Single Frequency UV and Visible OEM and End-User OPS Laser Systems
Genesis
CX 3551
Optical Specifications2
Wavelength (nm) FWHM Linewidth (MHz) 355 ±2
<5
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW) 40, 60, 80, 100
Spatial Mode TEM00
Beam Quality (M2) Beam Circularity3 <1.2
Beam Waist Diameter (mm)(FW, 1/e2)
Horizontal Vertical 1.0 ±0.1
0.975 ±0.2
0.915 ±0.2
<1.2
Beam Waist Location4 (mm) ±325
Beam Divergence (mrad)(FW, 1/e2) Beam Pointing Stability5 (μrad/°C) <6
Horizontal Beam Position Tolerance (mm) ±<1.0
±<1.0
Vertical Beam Position Tolerance (mm) Beam Pointing Tolerance (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise (%, rms)(10 Hz to 1 MHz) <0.1
Power Stability (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-operating 10 to 40
-10 to 60
Relative Humidity6 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head7 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
Electrical Specifications
Environmental Conditions
1
2
3
4
5
6
7
Available in OEM or end user versions.
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After warm-up over 2 hours.
Non-condensing.
Back connector not included in laser head length dimension.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
67
Genesis CX SLM-Series
Single Frequency UV and Visible OEM and End-User OPS Laser Systems
Optical Specifications2
Genesis
CX 4601
Genesis
CX 4801
Genesis
CX 4881
Wavelength (nm)
488 ±3
460 ±3
480 ±3
FWHM Linewidth (MHz) <5
Pulse Format CW
Spectral Purity (%) >99
1000
1000
Spatial Mode Output Power (mW)
Beam Quality TEM00
<1.1
Beam Circularity3 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) 1.0 ±0.1
2.25 ±10%
<0.5
±0.5
Beam Pointing Stability5 (μrad/°C) <2
Horizontal Beam Position Tolerance6 (mm) ±<1.0
±<1.0
2000
Vertical Beam Position Tolerance6 (mm) Beam Pointing Tolerance6 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Horizontal, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability7 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-operating 10 to 40
-10 to 60
Environmental Conditions
Relative Humidity8 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head9 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
9
68
Available in OEM or end user versions.
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis CX SLM-Series
Single Frequency UV and Visible OEM and End-User OPS Laser Systems
Optical Specifications2
Wavelength (nm)
Genesis
CX 5141
Genesis
CX 5321
Genesis
CX 561
Genesis
CX 5771 Genesis
CX 590
577 ±3
590 ±3
2000
1000
514 ±3
532 ±3
561 ±3
FWHM Linewidth (MHz) <5
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW)
2000, 4000
2000, 4000
1000
Spatial Mode Beam Quality TEM00
<1.1
Beam Circularity3 1.0 ±0.1
2.25 ±10%
<0.5
±0.5
Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location4 (m) Beam Pointing Stability5 (μrad/°C) <2
Horizontal Beam Position Tolerance6 (mm) ±<1.0
Vertical Beam Position Tolerance6 (mm) ±<1.0
Beam Pointing Tolerance6 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Horizontal, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability7 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
10 to 40
-10 to 60
Environmental Conditions
Ambient Temperature (°C)
Operating
Non-operating
Relative Humidity8 (%)
5 to 95
CE Marking
IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head9
Cables (laser head to controller)
281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
9
Available in OEM or end user versions.
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
69
Genesis CX SLM-Series
Single Frequency UV and Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis CX-Series
High Current OEM Power Supply
Top View
208.28 mm
(8.2 in.)
Side View
96.52 mm
(3.8 in.)
Front View
Rear View
Bottom View
299.72 mm
(11.8 in.)
Genesis CX-Series
Benchtop Power Supply
Front View
Side View
228.9 mm
(9.01 in.)
361.1 mm
(14.22 in.)
159.8 mm
(6.29 in.)
19.8 mm
(0.78 in.)
70
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis CX SLM-Series
Single Frequency UV and Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis CX SLM-Series
OEM and End User
Top View
4.78 mm Dia. Thru
C’Bore 7.92 mm Dia.
X 4.83 mm Deep
(0.188 Dia. Thru
C’Bore 0.312 in. Dia.
X 0.19 in. Deep)
(6X)
19.38 mm
(0.76 in.)
Rear View
Control
10.0 mm
(0.39 in.)
165.38 mm (6.51 in.)
Front View
Power On Indicator
Side View
Fan
Aux.
137.26 mm
(5.4 in.)
Manual Shutter
Output
Beam
84.51 mm
(3.33 in.)
44.75 mm
(1.76 in.)
11.94 mm
(0.47 in.)
Ground Lug
Bottom View
Slot 6.38 +0.03/-0.00 mm Wide X 9.7 mm Deep
(0.251 +0.001/-0.00 in. Wide X 0.38 in. Deep
133.38 mm
(5.25 in.)
144.93 mm
(5.71 in.)
156.06 mm
(6.14 in.)
52.85 mm
(2.08 in.)
Heatsink Surface
20.65 mm
(0.81 in.)
DC Power
6.38 +0.03/-0.00 mm Dia. X 9.7 mm Deep
(0.251 +0.001/-0.00 in. Dia. X 0.38 in. Deep
156.06 mm
(6.14 in.)
0.0 mm
(0.0 in.)
34.93 mm
(1.38 in.)
108.9 mm
(4.29 in.)
182.88 mm
(7.2 in.)
5.56 mm
(0.22 in.)
280.57 mm
(11.05 in.)
47.28 mm
(1.86 in.)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
ISO 9001 Registered
Coherent offers a limited warranty for all Genesis CX SLM-Series lasers. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
71
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM
and End-User OPS Laser Systems
Applications like Ophthalmology, Microscopy and Photocoagulation are enable by low noise, visible and infrared true CW lasers. The Genesis MX MTM-Series provides up to 8W of visible laser light or 10W of infrared laser light from either
OEM or CDRH-compliant end-user systems.
Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL)
technology, the Genesis MX MTM-Series features variable output power without
changing the beam parameters. This, combined with low noise and high stability,
provides unparalleled laser performance in a convenient package.
•Multitransverse mode
•OEM or end-user versions
•Air- or water-cooled solutions
Genesis MX MTM-Series Applications:
•Ophthalmology
•Microscopy
•Photocoagulation
Genesis Laser Family
Genesis MX MTM-Series is the perfect match for customers in need of the highest performing CW laser technology for research and instrumentation in medical
and therapeutic applications.
Genesis MX MTM-Series Features:
Genesis MX MTM-Series
OEM version
www.Coherent.com/GenesisMX_MTM-Series
72
Superior Reliability & Performance
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Optical Specifications1
Genesis
MX 460
Genesis
MX 480
Genesis
MX 488
Genesis
MX 514
Genesis
MX 532
Wavelength (nm) 460 ±3 480 ±3 488 ±3
14 ±3
532 ±3
CW
3000, 5000
3000, 5000, 8000
Pulse Format Spectral Purity (%) Output Power (mW) >99
1000, 2000 2000 3000, 5000
Multimode
<7
<7
Spatial Mode Beam Quality9 (M2)
Horizontal Vertical Beam Circularity2,9,10 Beam Waist Diameter9,10 (mm)(FW, 1/e2) Beam Divergence9,10 (mrad)(FW, 1/e2) 1.25
1.4 1.6 1.6
1.8
1.8
1.3 1.5 1.5
<1.4
<1.4
0.25 ±0.25
Beam Waist Location3,9,10 (nm) Beam Pointing Stability4,9 (μrad/°C) <5
Horizontal Beam Position Tolerance5 (mm) ±<1.0
±<1.0
Vertical Beam Position Tolerance5 (mm) Beam Pointing Tolerance5 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz (%, peak-to-peak) <1
<10
Power Stability6 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
10 to 40 water-cooled, 10 to 35 air-cooled
-10 to 60
Environmental Conditions
Ambient Temperature (°C)
Operating Non-Operating Relative Humidity7 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
3
Negative value corresponds to a location inside head.
4
After 2-hour warm-up.
5
Measured at the output window.
6
Measured over 8 hrs.
7
Non-condensing.
8
Back connector not included in laser head length dimension.
9
Contact Coherent for any specific application requirements.
10
Typical value.
2
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
73
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Optical Specifications1
Wavelength (nm) Pulse Format Spectral Purity (%) Output Power (mW) Genesis
MX 561 Genesis
MX 577
Genesis
MX 590
561 ±3 577 ±3
590 ±3
CW
>99
2000 3000, 5000
<7
<7
1.25
1000, 2000
Spatial Mode Multimode
Beam Quality9 (M2)
Horizontal Vertical Beam Circularity2,9,10 Beam Waist Diameter9,10 (mm)(FW, 1/e2) 1.8
<1.4
Beam Waist Location3,9,10 (nm) 0.25 ±0.25
Beam Pointing Stability4,9 (μrad/°C) <5
Horizontal Beam Position Tolerance5 (mm) ±<1.0
Vertical Beam Position Tolerance5 (mm) ±<1.0
Beam Pointing Tolerance5 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Beam Divergence9,10 (mrad)(FW, 1/e2) Noise
10 Hz to 10 MHz (%, rms) <1
10 Hz to 5 kHz (%, peak-to-peak) <10
Power Stability6 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-Operating 10 to 40 water-cooled, 10 to 35 air-cooled
-10 to 60
Environmental Conditions
Relative Humidity7 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
3
Negative value corresponds to a location inside head.
4
After 2-hour warm-up.
5
Measured at the output window.
6
Measured over 8 hrs.
7
Non-condensing.
8
Back connector not included in laser head length dimension.
9
Contact Coherent for any specific application requirements.
10
Typical value.
2
74
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Optical Specifications1
Genesis
MX 920 Genesis
MX 1064 Genesis
MX 1154
Wavelength (nm) 920 ±10 1064 ±10 1154 ±15
4000 10,000 6000
Spatial Mode Multimode
Output Power (mW) Bandwidth (nm) <5.0
Beam Waist Dimensions (mm)
Horizontal Size2 (FW, 1/e2, mm) Vertical Size2 (FW, 1/e2, mm) Location2,3 (mm) 0.6
0.6
-150
Beam Divergence
Horizontal4 (FW, 1/e2, mrad) Vertical4 (FW, 1/e2, mrad) 3.5
3.5
<2
<2
Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 100 kHz (%, peak-to-peak) <0.5
<10
Polarization Ratio Vertical, >100:1
Operating Diode Current (A) <30 <38 <32
Maximum Diode Current (A) <36 <45 <38.5
M2
Horizontal Vertical Utility and Environmental Requirements
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements5 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head5 256 x 49 x 71 mm (10.07 x 1.93 x 2.76 in.)
Weight
Laser Head (g) 730 ±10
1
2
3
4
5
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Typical value.
Measured from the output face, negative value corresponds to a location inside the head; positive outside.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Contact integration support for options on air-cooling TEC or waterplate.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
75
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Optical Specifications1
Wavelength (nm) Genesis
MX 460 OEM Genesis
MX 480 OEM Genesis
MX 488 OEM
Genesis
MX 514 OEM
Genesis
MX 532 OEM
460 ±3 480 ±3 488 ±3
514 ±3
532 ±3
1000, 2000 2000 3000, 5000
3000, 5000
3000, 5000, 8000
Spatial Mode Multimode
Bandwidth (nm) <0.5
Beam Waist Dimensions (mm)
Horizontal Size2 (FW, 1/e2, mm) Vertical Size2 (FW, 1/e2, mm) Location2,3 (mm) 0.14 0.11 0.17 0.13 0.17
0.16
-60
0.17
0.13
0.17
0.13
Beam Divergence
Horizontal2 (FW, 1/e2, mrad) Vertical2 (FW, 1/e2, mrad) <18 <16 <20 <20 <20
<20
<20
<20
<20
<20
Collimated Version
Beam Waist Diameter2 (1/e2, mm) Beam Divergence2 (1/e2, mrad) Beam Waist Location2 (m) 1.4 1.3 1.6 1.5 1.6
1.5
0.25 ±0.25
1.8
1.4
1.8
1.4
<7
<7
Output Power (mW) M2
Horizontal Vertical Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz (%, peak-to-peak) <1
<10
Polarization Ratio Horizontal, >100:1
Direct Modulation5 Available
Utility and Environmental Requirements
Operating Diode Current (A) <22.5, <27 <27 <30, <33
<3o, <33
<3o, <33, <38
Maximum Diode Current (A) <27, <32 <32 <36, <40
<36, <40
<36, <40, <45
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements6 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
1
2
3
4
5
6
76
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Typical value.
Measured from the output face, negative value corresponds to a location inside the head; positive outside.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
Contact integration support for options on air-cooling TEC or waterplate.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Genesis
MX 561 OEM Optical Specifications1
Genesis
MX 577 OEM
Genesis
MX 590 OEM
Wavelength (nm) 561 ±3 577 ±3
590 ±3
Output Power (mW) 2000 3000, 5000
1000, 2000
Spatial Mode Multimode
Bandwidth (nm) <0.5
0.17
0.13
0.13
-60
Beam Divergence
Horizontal2 (FW, 1/e2, mrad) Vertical2 (FW, 1/e2, mrad) <20
<20
Collimated Version
Beam Waist Diameter2 (1/e2, mm) Beam Divergence2 (1/e2, mrad) Beam Waist Location2 (m) 1.8
1.4
0.25 ±0.25
<7
<7
Beam Waist Dimensions (mm)
Horizontal Size2 (FW, 1/e2, mm) Vertical Size2 (FW, 1/e2, mm) Location2,3 (mm) M2
Horizontal Vertical Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz (%, peak-to-peak) <1
<10
Polarization Ratio Horizontal, >100:1
Direct Modulation5 Available
0.13
Utility and Environmental Requirements
Operating Diode Current (A) <33 <30, <33
<30, <32
Maximum Diode Current (A) <40 <36, <40
<36, <38
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements6 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
1
2
3
4
5
6
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Typical value.
Measured from the output face, negative value corresponds to a location inside the head; positive outside.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
Contact integration support for options on air-cooling TEC or waterplate.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
77
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX MTM-Series
(End-User) Air-cooled version
Side View
119.08 mm
(4.69 in.)
67.34 mm
(2.65 in.)
61.6 mm
(2.43 in.)
246.08 mm
(9.69 in.)
68.2 mm
(2.69 in.)
95.25 mm
(3.75 in.)
47.63 mm
(1.88 in.)
Rear View
76.56 mm
(3.01 in.)
59.56 mm
(2.34 in.)
Alignment Hole
0.251/0.252 in. Dia.
X 0.38 in. Deep
205.56 mm
(8.09 in.)
265.13 mm
(10.44 in.)
10.41 mm
(0.41 in.)
188.56 mm
(7.42 in.)
Front View
0.0 mm
(0.0 in.)
13.53 mm
(0.53 in.)
Alignment Slot
0.251/0.252 in. Wide
X 0.25 in. Long
X 0.38 in. Deep
10.0 mm
(0.39 in.)
10-32
61.6 mm
(2.43 in.)
65.0 mm
(2.56 in.)
Mounting Holes
M5 - 0.8 X 0.38 in. Deep
(4X)
10-32
M5
M5
M5
M5
Mounting Holes
10-32 X 0.38 in. Deep
(4X)
45.0 mm
(1.77 in.)
10-32
10-32
Top View
Genesis MX MTM-Series
(End-User) Water-cooled version
Side View
119.08 mm
(4.69 in.)
21.29 mm
(0.84 in.)
61.6 mm
(2.43 in.)
246.08 mm
(9.69 in.)
68.2 mm
(2.69 in.)
95.25 mm
(3.75 in.)
47.63 mm
(1.88 in.)
265.13 mm
(10.44 in.)
Alignment Hole
0.251/0.252 in. Dia.
X 0.38 in. Deep
Rear View
205.56 mm
(8.09 in.)
76.56 mm
(3.01 in.)
59.56 mm
(2.34 in.)
10.41 mm
(0.41 in.)
188.56 mm
(7.42 in.)
Front View
0.0 mm
(0.0 in.)
13.53 mm
(0.53 in.)
Alignment Slot
0.251/0.252 in. Wide
X 0.25 in. Long
X 0.38 in. Deep
10.0 mm
(0.39 in.)
10-32
10-32
M5
61.6 mm
(2.43 in.)
65.0 mm
(2.56 in.)
M5
45.0 mm
(1.77 in.)
10-32
M5
M5
Mounting Holes
M5 - 0.8 X 0.38 in. Deep
(4X)
Mounting Holes
10-32 X 0.38 in. Deep
(4X)
10-32
Top View
78
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX MTM-Series
(OEM)
Top View
44 mm
(1.73 in.)
Front View
22 mm (0.87 in.)
29.78 mm (1.17 in.)
111.1 mm
(4.37 in.)
4.78 mm
(0.19 in.)
19.05 mm (0.75 in.)
9.53 mm (0.375 in.)
4-40 UNC-2B X 0.25 Deep
Tapped Holes (4X)
Window
19.05 mm (0.75 in.)
50.39 mm
(1.98 in.)
9.53 mm
(0.375 in.)
4-40 UNC-2B X 0.20 Deep (2X)
120.65 mm (4.75 in.)
Rear View
7.9 mm (0.31 in.)
Ø15.88 mm
(0.625 in.)
2°
3.13 mm (0.12 in.)
64.47 mm
(2.54 in.)
13.51 mm (0.53 in.)
27.94 mm
(1.1 in.)
Side
View
13.49 mm
(0.53 in.)
5.08 mm
(0.2 in.)
Base Plate
Requirements
This surface must be flat within 0.001 in.
and have 32 µm finish or better within
TEC mounting areas.
5.46 mm
(0.22 in.)
53.59 mm
(2.11 in.)
12.95 mm (0.51 in.)
18.8 mm
(0.74 in.)
15.24 mm (0.6 in.)
18.8 mm
(0.74 in.)
86.87 mm (3.42 in.)
89.92 mm (3.54 in.)
112.78 mm (4.44 in.)
0.125 Dia. Dowel Pin (2X)
Genesis MX MTM-Series
Benchtop Power Supply
Spacer Detail
1.52 mm (0.06 in.)
12.7 mm (0.5 in.)
8-32 UNC-2B X 0.50 Deep
(4X)
6.35 mm
(0.25 in.)
6.35 mm
(0.25 in.)
45.21 mm
(1.78 in.)
24.89 mm
(0.98 in.)
0.188 Dia. Thru (2X)
4.06 mm (0.16 in.)
3.175 mm
(0.125 in.)
112.78 mm (4.44 in.)
120.65 mm (4.75 in.)
6.35 mm
(0.25 in.)
Clamping Bar Detail
11.43 mm (0.45 in.)
6.1 mm
(0.24 in.)
16.26 mm
(0.64 in.)
5.08 mm
(0.2 in.)
Front View
Side View
228.9 mm
(9.01 in.)
361.1 mm
(14.22 in.)
159.8 mm
(6.29 in.)
19.8 mm
(0.78 in.)
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
79
Genesis MX MTM-Series
Multitransverse Mode Visible and Infrared OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX MTM-Series
OEM Benchtop Power Supply
Top View
208.28 mm
(8.2 in.)
Side View
96.52 mm
(3.8 in.)
Front View
Rear View
Bottom View
299.72 mm
(11.8 in.)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
ISO 9001 Registered
Coherent offers a limited warranty for all Genesis MX MTM-Series lasers. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
80
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX STM-Series
TEM00 Visible OEM and End-User OPS Laser Systems
Applications like Flow Cytometry, Particle Counting, DNA Sequencing and Microscopy are enable by low noise, visible true CW lasers. The Genesis MX
STM-Series provides up to 1W of visible laser light from either OEM or CDRH-
compliant end-user systems.
Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL)
technology, the Genesis MX STM-Series features variable output power without
changing the beam parameters. This, combined with a diffraction-limited beam,
low noise and high stability, provides unparalleled laser performance in a convenient package.
•Single transverse mode (TEM00)
•OEM or end-user versions
•Air- or water-cooled solutions
Genesis MX STM-Series
Applications:
•Flow Cytometry
•Particle Counting
•DNA Sequencing
•Microscopy
Genesis Laser Family
Genesis MX STM-Series is the perfect match for customers in need of the highest
performing CW laser technology for research and instrumentation in life science
and biological applications.
Genesis MX STM-Series
Features:
Genesis MX STM-Series
OEM version
www.Coherent.com/GenesisMX_STM-Series
Superior Reliability & Performance
81
Genesis MX STM-Series
TEM00 Visible OEM and End-User OPS Laser Systems
Optical Specifications1
Genesis
MX 460 Genesis
MX 480 Genesis
MX 488
Wavelength (nm) 488 ±3
460 ±3 480 ±3 FWHM Linewidth (GHz) <30
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW) Spatial Mode Beam Quality (M2) 500 500 TEM00
Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) 500, 1000
<1.1
1.0 ±0.1
1.0 ±0.1
0.7 ±0.1
±0.25
Beam Waist Location3 (m) Beam Pointing Stability4,5 (μrad/°C) <5
Horizontal Beam Position Tolerance5 (mm) ±<1.0
Vertical Beam Position Tolerance5 (mm) ±<1.0
Beam Pointing Tolerance5 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability6 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-Operating 10 to 40
-10 to 60
Environmental Conditions
Relative Humidity7 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
82
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX STM-Series
TEM00 Visible OEM and End-User OPS Laser Systems
Optical Specifications1
Genesis
MX 514 Genesis
MX 532
514 ±3 532 ±3
Wavelength (nm) FWHM Linewidth (GHz) Pulse Format CW
Spectral Purity (%) >99
Output Power (W) 500, 1000 500, 1000
TEM00
Spatial Mode Beam Quality (M2) Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Genesis
MX 561 Genesis
MX 577
561 ±3 577 ±3
500 500, 1000
<30
<1.1
1.0 ±0.1
1.0 ±0.1
0.7 ±0.1
±0.25
Beam Waist Location3 (m) Beam Pointing Stability4,5 (μrad/°C) <5
Horizontal Beam Position Tolerance5 (mm) ±<1.0
Vertical Beam Position Tolerance5 (mm) ±<1.0
Beam Pointing Tolerance5 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability6 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
10 to 40
-10 to 60
Environmental Conditions
Ambient Temperature (°C)
Operating Non-Operating Relative Humidity7 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
83
Genesis MX STM-Series
TEM00 Visible OEM and End-User OPS Laser Systems
Optical Specifications1
Wavelength (nm) Output Power (mW) Genesis
MX 460 OEM Genesis
MX 480 OEM 460 ±3 480 ±3 488 ±3
500 500 500, 1000
TEM00
<30
Spatial Mode FWHM Linewidth (GHz) Pulse Format CW
Beam Circularity 1.0 ±0.1
Beam Position Tolerance (mm)
Horizontal Vertical ±<1.0
±<1.0
Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1
0.7 ±0.1
±0.25
<1.1
<1.1
Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1
<1
Horizontal, >100:1
Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2
Horizontal Vertical Genesis
MX 488 OEM
Polarization Ratio CDRH Compliance No
Warm-up Time (minutes) <10
Direct Modulation6 Available
Operating Diode Current (A) <10 <10 <10, <12
Maximum Diode Current (A) <12 <12 <12, <15
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements7 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
Utility and Environmental Requirements
1
2
3
4
5
6
7
84
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Measured at the output of the laser head.
Negative value corresponds to a location within the head.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Over 8 hours.
Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
Contact integration support for options on air-cooling TEC or waterplate.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX STM-Series
TEM00 Visible OEM and End-User OPS Laser Systems
Genesis
MX 514 OEM Optical Specifications1
Wavelength (nm) Genesis
MX 532 OEM
Genesis
MX 561 OEM Genesis
MX 577 OEM
514 ±3 532 ±3
561 ±3 577 ±3
500, 1000 500, 1000
500 500, 1000
Spatial Mode FWHM Linewidth (GHz) TEM00
<30
Output Power (mW) Pulse Format CW
Beam Circularity 1.0 ±0.1
Beam Position Tolerance (mm)
Horizontal Vertical ±<1.0
±<1.0
Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1
0.7 ±0.1
±0.25
<1.1
<1.1
Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1
<1
Horizontal, >100:1
Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2
Horizontal Vertical Polarization Ratio CDRH Compliance No
Warm-up Time (minutes) <10
Direct Modulation6 Available
<10
Utility and Environmental Requirements
Operating Diode Current (A) Maximum Diode Current (A) <12
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements7 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
1
2
3
4
5
6
7
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Measured at the output of the laser head.
Negative value corresponds to a location within the head.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Over 8 hours.
Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
Contact integration support for options on air-cooling TEC or waterplate.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
85
Genesis MX STM-Series
TEM00 Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX STM-Series
Air-cooled version
67.26 mm
(2.65 in.)
Side View
200.86 mm
(7.91 in.)
78.74 mm
(3.1 in.)
61.6 mm
(2.43 in.)
68.2 mm
(2.69 in.)
89.22 mm
(3.51 in.)
47.64 mm
(1.88 in.)
10.41 mm
(0.41 in.)
Rear View
10.0 mm
(0.39 in.)
Alignment Hole
0.251/0.252 in. Dia.
X 0.38 in. Deep
182.96 mm
(7.20 in.)
53.96 mm
(2.12 in.)
36.96 mm
(1.45 in.)
219.91 mm
(8.66 in.)
165.96 mm
(6.53 in.)
Front View
0.0 mm
(0.0 in.)
13.53 mm
(0.53 in.)
10-32
10-32
61.6 mm
(2.43 in.)
55.0 mm
(2.17 in.)
Alignment Slot
0.251/0.252 in. Wide
X 0.25 in. Long
X 0.38 in. Deep
M5
M5
M5
M5
Mounting Holes
M5 - 0.8 X 0.38 in. Deep
(4X)
45.0 mm
(1.77 in.)
10-32
Mounting Holes
10-32 X 0.38 in. Deep
(4X)
10-32
Top View
Genesis MX STM-Series
Water-cooled version
Side View
78.74 mm
(3.1 in.)
200.86 mm
(7.91 in.)
61.6 mm
(2.43 in.)
21.29 mm
(0.84 in.)
68.2 mm
(2.69 in.)
89.22 mm
(3.51 in.)
47.64 mm
(1.88 in.)
10.41 mm
(0.41 in.)
Rear View
10.0 mm
(0.39 in.)
Alignment Hole
0.251/0.252 in. Dia.
X 0.38 in. Deep
182.96 mm
(7.20 in.)
53.96 mm
(2.12 in.)
36.96 mm
(1.45 in.)
219.91 mm
(8.66 in.)
165.96 mm
(6.53 in.)
Front View
0.0 mm
(0.0 in.)
13.53 mm
(0.53 in.)
10-32
10-32
61.6 mm
(2.43 in.)
55.0 mm
(2.17 in.)
Alignment Slot
0.251/0.252 in. Wide
X 0.25 in. Long
X 0.38 in. Deep
M5
M5
M5
M5
Mounting Holes
M5 - 0.8 X 0.38 in. Deep
(4X)
45.0 mm
(1.77 in.)
10-32
10-32
Mounting Holes
10-32 X 0.38 in. Deep
(4X)
Top View
86
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX STM-Series
High-Power Optically Pumped Semiconductor Lasers (OPSL)
Mechanical Specifications
Genesis MX STM-Series
Water-cooled version
Top View
111.1 mm
(4.37 in.)
61 mm
(2.4 in.)
34.55 mm (1.36 in.)
4.78 mm (0.19 in.)
34 mm
(1.34 in.)
17 mm
(0.67 in.)
Mounting Holes
M3 X 12.2 mm
(0.48 in.) Deep
(4X)
Front
View
3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) DIA
X 5.08 mm (0.20 in.) Deep
29.78 mm
(1.17 in.)
28.15 mm
(1.11 in.)
Slot
3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) Wide
X 2.03 mm (0.08 in.) Long X 5.08 mm (0.20 in.) Deep
44 mm
(1.73 in.)
120.65 mm
(4.75 in.)
26 mm
(1.02 in.)
22 mm
(0.87 in.)
Rear
View
Side View
Base Plate
Requirements
5.08 mm
(0.2 in.)
This surface must be flat within 0.001 in.
and have 32 µm finish or better within
TEC mounting areas.
5.46 mm
(0.22 in.)
53.59 mm
(2.11 in.)
12.7 mm (0.5 in.)
1.52 mm (0.06 in.)
18.8 mm
(0.74 in.)
15.24 mm (0.6 in.)
18.8 mm
(0.74 in.)
86.87 mm (3.42 in.)
8-32 UNC-2B X 0.50 Deep
(4X)
89.92 mm (3.54 in.)
112.78 mm (4.44 in.)
0.125 Dia. Dowel Pin (2X)
Genesis MX STM-Series
Benchtop Power Supply
6.35 mm
(0.25 in.)
12.95 mm (0.51 in.)
Spacer Detail
6.35 mm
(0.25 in.)
45.21 mm
(1.78 in.)
24.89 mm
(0.98 in.)
0.188 Dia. Thru (2X)
4.06 mm (0.16 in.)
3.175 mm
(0.125 in.)
112.78 mm (4.44 in.)
120.65 mm (4.75 in.)
6.35 mm
(0.25 in.)
Clamping Bar Detail
11.43 mm (0.45 in.)
6.1 mm
(0.24 in.)
16.26 mm
(0.64 in.)
5.08 mm
(0.2 in.)
Front View
Side View
228.9 mm
(9.01 in.)
361.1 mm
(14.22 in.)
159.8 mm
(6.29 in.)
19.8 mm
(0.78 in.)
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
87
Genesis MX STM-Series
High-Power Optically Pumped Semiconductor Lasers (OPSL)
Mechanical Specifications
Genesis MX STM-Series
Low Current OEM Controller
Laser Control
Interlock
6-32
Side View
M3
68.58 mm
(2.70 in.)
52.37 mm
(2.06 in.)
24V In
188.57 mm
(7.42 in.)
USB
204.77 mm
(8.06 in.)
RS-232D
Serial Port
Top View
M3
Diode Out
Bottom View
16.0 mm (0.63 in.)
M3
M3
6-32
16.0 mm (0.63 in.)
M3
6-32
111.0 mm (4.37 in.)
M3
127 mm
(5.0 in.)
Rear View
111.76 mm
(4.4 in.)
6-32
68.58 mm
(2.70 in.)
52.37 mm
(2.06 in.)
243.31 mm
(9.58 in.)
M3
6-32
188.57 mm
(7.42 in.)
M3
127 mm (5.0 in.)
257.15 mm
(10.12 in.)
22.43 mm
(0.88 in.)
15.24 mm
(0.6 in.)
204.77 mm
(8.06 in.)
111 mm (4.37 in.)
18.34 mm
(0.72 in.)
GND
15.24 mm (0.60 in.)
111.76 mm (4.40 in.)
6-32
0 mm
(0.0 in.)
0 mm (0.0 in.)
0 mm
(0.0 in.)
Mounting Holes (both sides)
Ext. Fan
77.65 mm
(3.06 in.)
6-32
42.15 mm
(1.66 in.)
Front View
TEC
Mounting Holes
10X On Bottom
As Indicated
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
ISO 9001 Registered
Coherent offers a limited warranty for all Genesis MX STM-Series lasers. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
88
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User
OPS Laser Systems
Applications like Flow Cytometry, Particle Counting, DNA Sequencing and
Microscopy are enable by low noise, visible true CW lasers. The Genesis MX
SLM-Series provides up to 1W of visible laser light from either OEM or CDRHcompliant end-user systems.
Based on Coherent’s unique Optically Pumped Semiconductor Laser (OPSL)
technology, the Genesis MX SLM-Series features single frequency operation for
the most demanding applications. This, combined with stable beam parameters
across output powers, a diffraction-limited beam, low noise and high stability,
provides unparalleled laser performance in a convenient package.
•All Genesis MX advantages with
single-frequency output
•OEM or end-user versions
•Air- or water-cooled solutions
Genesis MX SLM-Series Applications:
•Flow Cytometry
•Particle Counting
•DNA Sequencing
•Microscopy
Genesis Laser Family
Genesis MX SLM-Series is the perfect match for customers in need of the highest
performing CW laser technology for research and instrumentation in life science
and biological applications.
Genesis MX SLM-Series Features:
Genesis MX SLM-Series
OEM version
www.Coherent.com/GenesisMX_STM-Series
Superior Reliability & Performance
89
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Optical Specifications1
Genesis
MX 460 Genesis
MX 480 Genesis
MX 488
Wavelength (nm) 488 ±3
460 ±3 480 ±3 FWHM Linewidth (MHz) <5
Pulse Format CW
Spectral Purity (%) >99
Output Power (mW) Spatial Mode Beam Quality (M2) 500 500 TEM00
Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) 500, 1000
<1.1
1.0 ±0.1
1.0 ±0.1
0.7 ±0.1
±0.25
Beam Waist Location3 (m) Beam Pointing Stability4,5 (μrad/°C) <5
Horizontal Beam Position Tolerance5 (mm) ±<1.0
Vertical Beam Position Tolerance5 (mm) ±<1.0
Beam Pointing Tolerance5 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability6 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
Ambient Temperature (°C)
Operating Non-Operating 10 to 40
-10 to 60
Environmental Conditions
Relative Humidity7 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
90
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Optical Specifications1
Wavelength (nm) Genesis
MX 514 Genesis
MX 532
Genesis
MX 561 Genesis
MX 577
Genesis
MX 590
577 ±3
590 ±3
500, 1000
500, 1000
514 ±3 532 ±3
561 ±3 FWHM Linewidth (MHz) <5
Pulse Format CW
Spectral Purity (%) >99
500, 1000 500, 1000
500 Beam Quality (M2) TEM00
<1.1
Beam Circularity2 Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1
1.0 ±0.1
0.7 ±0.1
Beam Waist Location3 (m) ±0.25
Beam Pointing Stability4,5 (μrad/°C) <5
Horizontal Beam Position Tolerance5 (mm) ±<1.0
±<1.0
Output Power (mW) Spatial Mode Beam Divergence (mrad)(FW, 1/e2) Vertical Beam Position Tolerance5 (mm) Beam Pointing Tolerance5 (mrad) <5
Polarization Ratio Linear, >100:1
Polarization Direction Vertical, ±5°
Noise (%, rms)(10 Hz to 10 MHz) <0.1
Power Stability6 (%)(pk-pk) ±<1
Warm-up Time (minutes) <10
CDRH Compliant Yes
Electrical Specifications
Operating Voltage (VAC) 100 to 240
Frequency (Hz) 50 to 60
Power Consumption (W) 500
10 to 40 water-cooled, 10 to 35 air-cooled
-10 to 60
Environmental Conditions
Ambient Temperature (°C)
Operating Non-Operating Relative Humidity7 (%) 5 to 95
CE Marking IEC 61010-1/EN 61010-1
Dimensions (L x W x H)
Laser Head8 Cables (laser head to controller) 281 x 156 x 85 mm (11.06 x 6.14 x 3.35 in.)
2m (6.5 ft.)
1
2
3
4
5
6
7
8
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Circularity defined as vertical diameter divided by horizontal diameter.
Negative value corresponds to a location inside head.
After 2-hour warm-up.
Measured at the output window.
Measured over 8 hrs.
Non-condensing.
Back connector not included in laser head length dimension.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
91
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Optical Specifications1
Wavelength (nm) Output Power (mW) Genesis
MX 460 OEM Genesis
MX 480 OEM 460 ±3 480 ±3 488 ±3
500 500 500, 1000
TEM00
<5
Spatial Mode FWHM Linewidth (MHz) Pulse Format CW
Beam Circularity 1.0 ±0.1
Beam Position Tolerance (mm)
Horizontal Vertical ±<1.0
±<1.0
Beam Waist Diameter (mm)(FW, 1/e2) 1.0 ±0.1
0.7 ±0.1
±0.25
<1.1
<1.1
Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1
<1
Horizontal, >100:1
Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2
Horizontal Vertical Genesis
MX 488 OEM
Polarization Ratio CDRH Compliance No
Warm-up Time (minutes) <10
Direct Modulation6 Available
Operating Diode Current (A) <10 <10 <10, <12
Maximum Diode Current (A) <12 <12 <12, <15
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements7 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
Utility and Environmental Requirements
1
2
3
4
5
6
7
92
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Measured at the output of the laser head.
Negative value corresponds to a location within the head.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Over 8 hours.
Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
Contact integration support for options on air-cooling TEC or waterplate.
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Genesis
MX 514 OEM Optical Specifications1
Wavelength (nm) Output Power (mW) Genesis
MX 532 OEM
Genesis
MX 561 OEM 514 ±3 532 ±3
561 ±3 577 ±3
590 ±3
500, 1000 500, 1000
500 500, 1000
500, 1000
TEM00
<5
Spatial Mode FWHM Linewidth (MHz) Pulse Format CW
Beam Circularity 1.0 ±0.1
Beam Position Tolerance (mm)
Horizontal Vertical ±<1.0
±<1.0
1.0 ±0.1
0.7 ±0.1
±0.25
<1.1
<1.1
Pointing Stability4 (μrad/°C) <5
Noise
10 Hz to 10 MHz (%, rms) 10 Hz to 5 kHz5 (%, peak-to-peak) <0.1
<1
Horizontal, >100:1
Beam Waist Diameter (mm)(FW, 1/e2) Beam Divergence (mrad)(FW, 1/e2) Beam Waist Location2,3 (m) M2
Horizontal Vertical Genesis
MX 577 OEM
Polarization Ratio CDRH Compliance No
Warm-up Time (minutes) <10
Direct Modulation6 Available
Operating Diode Current (A) <10
Maximum Diode Current (A) <12
Diode Voltage (V) 1.5 to 2.2
Cooling Requirements7 Active cooling required
Case Temperature (°C) 25 ±2
Humidity Non-condensing
Dimensions (L x W x H)
Laser Head 121 x 44 x 65 mm (4.76 x 1.73 x 2.56 in.)
Weight
Laser Head (g) 730 ±10
Genesis
MX 590 OEM
Utility and Environmental Requirements
1
2
3
4
5
6
7
Optical parameters measured at the output plane of the laser head. Unless noted all parameters valid for the lifetime of the unit.
Measured at the output of the laser head.
Negative value corresponds to a location within the head.
Measured at the output window: tolerance relative to the nominal center of the output window and perpendicular to the mounting plane.
Over 8 hours.
Theoretical limit is >1 MHz; actual performance will be limited by the diode-driver (not included).
Contact integration support for options on air-cooling TEC or waterplate.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
93
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX SLM-Series
(End-User) Air-cooled
version
67.26 mm
(2.65 in.)
Side View
200.86 mm
(7.91 in.)
78.74 mm
(3.1 in.)
61.6 mm
(2.43 in.)
68.2 mm
(2.69 in.)
89.22 mm
(3.51 in.)
47.64 mm
(1.88 in.)
10.41 mm
(0.41 in.)
Rear View
10.0 mm
(0.39 in.)
Alignment Hole
0.251/0.252 in. Dia.
X 0.38 in. Deep
182.96 mm
(7.20 in.)
53.96 mm
(2.12 in.)
36.96 mm
(1.45 in.)
219.91 mm
(8.66 in.)
165.96 mm
(6.53 in.)
Front View
0.0 mm
(0.0 in.)
13.53 mm
(0.53 in.)
10-32
10-32
61.6 mm
(2.43 in.)
55.0 mm
(2.17 in.)
Alignment Slot
0.251/0.252 in. Wide
X 0.25 in. Long
X 0.38 in. Deep
M5
M5
M5
M5
Mounting Holes
M5 - 0.8 X 0.38 in. Deep
(4X)
45.0 mm
(1.77 in.)
10-32
Mounting Holes
10-32 X 0.38 in. Deep
(4X)
10-32
Top View
Genesis MX SLM-Series
(End-User) Water-cooled
version
Side View
78.74 mm
(3.1 in.)
200.86 mm
(7.91 in.)
61.6 mm
(2.43 in.)
21.29 mm
(0.84 in.)
68.2 mm
(2.69 in.)
89.22 mm
(3.51 in.)
47.64 mm
(1.88 in.)
10.41 mm
(0.41 in.)
Rear View
10.0 mm
(0.39 in.)
Alignment Hole
0.251/0.252 in. Dia.
X 0.38 in. Deep
182.96 mm
(7.20 in.)
53.96 mm
(2.12 in.)
36.96 mm
(1.45 in.)
219.91 mm
(8.66 in.)
165.96 mm
(6.53 in.)
Front View
0.0 mm
(0.0 in.)
13.53 mm
(0.53 in.)
10-32
10-32
61.6 mm
(2.43 in.)
55.0 mm
(2.17 in.)
Alignment Slot
0.251/0.252 in. Wide
X 0.25 in. Long
X 0.38 in. Deep
M5
M5
M5
M5
Mounting Holes
M5 - 0.8 X 0.38 in. Deep
(4X)
45.0 mm
(1.77 in.)
10-32
10-32
Mounting Holes
10-32 X 0.38 in. Deep
(4X)
Top View
94
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX SLM-Series
(OEM) Water-cooled version
Top View
111.1 mm
(4.37 in.)
61 mm
(2.4 in.)
34.55 mm (1.36 in.)
4.78 mm (0.19 in.)
34 mm
(1.34 in.)
17 mm
(0.67 in.)
Mounting Holes
M3 X 12.2 mm
(0.48 in.) Deep
(4X)
Front
View
3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) DIA
X 5.08 mm (0.20 in.) Deep
29.78 mm
(1.17 in.)
28.15 mm
(1.11 in.)
Slot
3.2 +0.025/-0.0 mm (0.126 + 0.001/-0.0 in.) Wide
X 2.03 mm (0.08 in.) Long X 5.08 mm (0.20 in.) Deep
44 mm
(1.73 in.)
120.65 mm
(4.75 in.)
26 mm
(1.02 in.)
22 mm
(0.87 in.)
Rear
View
Side View
Base Plate
Requirements
5.08 mm
(0.2 in.)
This surface must be flat within 0.001 in.
and have 32 µm finish or better within
TEC mounting areas.
5.46 mm
(0.22 in.)
53.59 mm
(2.11 in.)
12.7 mm (0.5 in.)
1.52 mm (0.06 in.)
18.8 mm
(0.74 in.)
15.24 mm (0.6 in.)
18.8 mm
(0.74 in.)
86.87 mm (3.42 in.)
8-32 UNC-2B X 0.50 Deep
(4X)
89.92 mm (3.54 in.)
112.78 mm (4.44 in.)
0.125 Dia. Dowel Pin (2X)
Genesis MX SLM-Series
Benchtop Power Supply
6.35 mm
(0.25 in.)
12.95 mm (0.51 in.)
Spacer Detail
6.35 mm
(0.25 in.)
45.21 mm
(1.78 in.)
24.89 mm
(0.98 in.)
0.188 Dia. Thru (2X)
4.06 mm (0.16 in.)
3.175 mm
(0.125 in.)
112.78 mm (4.44 in.)
120.65 mm (4.75 in.)
6.35 mm
(0.25 in.)
Clamping Bar Detail
11.43 mm (0.45 in.)
6.1 mm
(0.24 in.)
16.26 mm
(0.64 in.)
5.08 mm
(0.2 in.)
Front View
Side View
228.9 mm
(9.01 in.)
361.1 mm
(14.22 in.)
159.8 mm
(6.29 in.)
19.8 mm
(0.78 in.)
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
95
Genesis MX SLM-Series
Single Frequency Visible OEM and End-User OPS Laser Systems
Mechanical Specifications
Genesis MX SLM-Series
Low Current OEM Controller
Laser Control
Interlock
6-32
Side View
M3
68.58 mm
(2.70 in.)
52.37 mm
(2.06 in.)
24V In
188.57 mm
(7.42 in.)
USB
204.77 mm
(8.06 in.)
RS-232D
Serial Port
Top View
M3
Diode Out
Bottom View
16.0 mm (0.63 in.)
M3
M3
6-32
16.0 mm (0.63 in.)
M3
6-32
111.0 mm (4.37 in.)
M3
127 mm
(5.0 in.)
Rear View
111.76 mm
(4.4 in.)
6-32
68.58 mm
(2.70 in.)
52.37 mm
(2.06 in.)
243.31 mm
(9.58 in.)
M3
6-32
188.57 mm
(7.42 in.)
M3
127 mm (5.0 in.)
257.15 mm
(10.12 in.)
22.43 mm
(0.88 in.)
15.24 mm
(0.6 in.)
204.77 mm
(8.06 in.)
111 mm (4.37 in.)
18.34 mm
(0.72 in.)
GND
15.24 mm (0.60 in.)
111.76 mm (4.40 in.)
6-32
0 mm
(0.0 in.)
0 mm (0.0 in.)
0 mm
(0.0 in.)
Mounting Holes (both sides)
Ext. Fan
77.65 mm
(3.06 in.)
6-32
42.15 mm
(1.66 in.)
Front View
TEC
Mounting Holes
10X On Bottom
As Indicated
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
ISO 9001 Registered
Coherent offers a limited warranty for all Genesis MX SLM-Series lasers. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
96
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Femtosecond Lasers
from Coherent.
Chameleon Family:
Tunable Femtosecond Hands-Free
Lasers and OPOs
Discovery
High Power Dual Output
• >1.4W
• 680 nm to 1300 nm
• 100 fs with GDD precompensation
• Second high power output at 1040 nm
Ultra II
High Power Ti:Sapphire
• >3.5W
• 680 nm to 1080 nm
• 140 fs pulse duration
Femtosecond Lasers
Vision and Vision-S
With Dispersion Precompensation
• >3W
• 680 nm to 1080 nm
• 140 fs or 75 fs pulse duration
MPX and Compact OPO-Vis
Wavelength Extension
• Wavelength range from 340 nm to 4000 nm
• Dual outputs with independent tuning
• 130 fs to 200 fs pulse duration with GDD precompensation
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
www.Coherent.com/Chameleon
Superior Reliability & Performance
97
The Most Complete Portfolio
for Life Sciences.
Discover More
Solutions:
Compass 115M
Continuous wave laser with best performanceto-price ratio featuring excellent laser
CUBE
Complete, high-performance, full-feature
diode laser system at an attractive price
Miniature Diode Modules
Family of miniature diode laser modules
that produce high-quality elliptical or circular
beams. Also available in line generators
Verdi G
Family of OPSL lasers with powers up to 20W
at 532 nm
98
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Coherent
Laser Accessories.
Discover More
Solutions:
OBIS LX/LS
Laser Box
OBIS LX/LS
Scientific Remote
OBIS LX/LS
6-Laser Remote
OBIS LX/LS
Heat Sink
Sapphire
Driver Unit
Accessories
OBIS LX/LS Single
Laser Remote
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
99
OBIS LX/LS
Scientific Remote
Laser Remote and Power Supply for up to Six Lasers
OBIS LX and OBIS LS laser products come with a variety of accessories to support
your application needs.
OBIS LX/LS Scientific Remote
Features:
•Complete remote control of up
to six OBIS lasers
The OBIS Scientific Remote for OBIS LS and OBIS LX offers all the features from the
laser in a convenient CDRH-compliant interface with a touch-screen and internal
power supply for up to six lasers.
•Touchscreen interface with audio
As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these
are on the back panel of every OBIS LX/LS laser.
•USB, RS-232 and Ethernet for
additional control from host
computer
To simplify integration the OBIS Scientific Remote connects to the single SDRtype connector for power, signals and communication. The OBIS Scientific Remote
then brings all of these features to controls and connectors on the Remotes front
panel.
•Single SDR connection to each laser
OBIS Scientific Remote offers a convenient handle to angle the unit for easier
display.
Figure 1: OBIS LX/LS Scientific Remote for up to six lasers. Lasers sold separately.
•Modulation inputs for analog
and digital for six lasers
•OBIS connection software for PC
•Internal power supply remote
and six lasers
•Laser safety features such as key
switch and interlock
OBIS LX/LS Scientific Remote
Applications:
•Laboratories needing CDRH
features
•Applications wanting a simple
Analog or Digital inputs to control
the laser
•Applications wanting laser control
at a remote location away from
the laser
www.Coherent.com/OBISHeatSink
100
Superior Reliability & Performance
OBIS LX/LS Scientific Remote
Laser Remote and Power Supply for up to Six Lasers
System Specifications
OBIS LS/LX Scientific Remote
Touchscreen Display Size 108 mm (4.3 in.) diagonal
Touchscreen Display Resolution, Type 480 x 272 pixel, QVGA, TFT, 24-bit color
Touchscreen Display Mode1 Resistive Touchscreen
Audio Yes
Internal Power Supply Yes
OBIS Lasers that can be connected 1 to 6 lasers with power to optional 1 to 6 heat sink cooling fans
Host Computer Remote Control via USB2 USB 2.0, Mini B
Host Computer Remote Control via RS-2322 RS-232 115.2K, 8N1
Host Computer Remote via Ethernet2 Ethernet 10/100 (Mb) RJ45
Carry Handle and Stand 3-Position
Interlock Yes, included with shorting wire
Laser Status Indicators Yes, Individual LED for each laser
Analog Modulation Input SMB, 2000 Ohm, 0 to 5V
Digital Modulation Input3 SMB, 50 Ohm, 0 to 3V
Warm-up Time (minutes)(from cold start) <2
OBIS Connection Software2 Included on USB drive with user manual
Utility and Environmental Requirements
Power Consumption (W)(typical) 5 (without lasers)
Power Consumption (W)(maximum) 110 (with 6 lasers)
Internal Cooling Fan Yes
Power Input - Universal IEC-320
Power Cord (USA) 2.4m (8 ft.)
Operating Condition4 (°C) 0 to 50
Non-operating Condition4 (°C) -10 to +70
Shock Tolerance (6 ms) 20 g
Operating Voltage 90 to 264 VAC, 47 to 63 Hz
Dimensions (L x W x H) 180 x 293.5 x 104.4 mm (7.09 x 11.55 x 4.11 in.)
Weight 1.75 kg (3.86 lbs.)
Weight, Laser-to-Remote Cable (optional) 0.1 kg for 1 meter (0.25 kg for 3 meter)
Part Number for OBIS Scientific Remote 1234465
Part Number for OBIS Scientific Remote with Six Laser-to-Remote SDR Cables Included (1m each)
1234466
Part Number for OBIS LX/LS SDR-Type Cable from Laser to Remote
1-meter
1179451
3-meter
1179858
0.3-meter
1197523
1
2
3
4
Resistive touchscreen will work with gloves. This is a pressure sensitive touchscreen - not capacitive.
Host computer not provided. RS-232 and USB cable not provided. Software operates on Windows 7.
Digital modulation can be driven up to 5V.
Non-condensing.
Screen Shot
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
101
OBIS LX/LS Scientific Remote
Laser Remote and Power Supply for up to Six Lasers
Mechanical Specifications
OBIS LX/LS Scientific Remote
Front View
118 mm
(4.6 in.)
294 mm
(11.6 in.)
Handle Width
259 mm
(10.2 in.)
183 mm
(7.2 in.)
30°
Typical
Rear View
Handle Location
LOCKABLE IN 9 POSITIONS
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS LS/LX Scientific Remotes. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
102
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LX/LS
Single Laser Remote
Full Feature Laser Remote and Power Supply
OBIS LX and OBIS LS laser products come with a variety of accessories to support your application needs.
The OBIS Single Laser Remote for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface.
As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-
in-one laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these are on the back panel of every OBIS LX/LS laser.
To simplify integration the OBIS Single Laser Remote connects to the single SDR-type connector for power, signals and communication. The OBIS Single Laser Remote then brings all of these features to controls and connectors on the Remotes front and back panel.
OBIS Single Laser Remotes can even be stacked together with the provided
mounting hardware for applications using multiple OBIS LX/LS lasers.
OBIS LX/LS Single Laser Remote
Features:
•Compact size
•Laser safety features (CDRH)
such as key switch and interlock
• Laser status indicators
•Full input and output connections
for control, analog modulation and
digital modulation
•Compact power supply for single
laser included
•Brackets for mounting and stacking
included
OBIS LX/LS Single Laser Remote
Applications:
•Laboratories needing CDRH
features
•Applications wanting a simple
Analog or Digital inputs to control
the laser
•Applications wanting laser control
at a remote location away from
the laser
www.Coherent.com/OBISSingleLaserRemote
Superior Reliability & Performance
103
OBIS LX/LS Single Laser Remote
Full Feature Laser Remote and Power Supply
System Specifications
OBIS LX/LS Single Laser Remote
Host Computer Remote Control via USB1 USB 2.0, Mini B
Host Computer Remote Control via RS-2321 RS-232 115.2K, 8N1
Interlock Yes, included with shorting wire
Laser Status Indicators Yes
Analog Modulation Input SMB, 50 Ohm OR 2KOhm, 0 to 5V
Digital Modulation Input2 SMB, 50 Ohm, 0 to 3V
Warm-up Time (minutes)(from cold start) <2
OBIS Connection Software3
Included on USB drive with user manual
Power Consumption (W)(typical) 1 (laser not included)
Power Consumption (W)(maximum) 2 (laser not included)
Power Input
Universal IEC-320
Power Cord (USA) 2.4m (8 ft.)
Operating Condition4 (°C) 0 to 40
Non-operating Condition4 (°C)
-10 to +70
Shock Tolerance (6 ms) 20 g
Operating Voltage 90 to 264 VAC, 47 to 63 Hz
Dimensions (L x W x H) 105 x 68 x 36 mm (4.1 x 2.7 x 1.4 on.)
Weight
OBIS Single Laser Remote
0.23 kg (0.5 lbs.)
0.23 kg (0.5 lbs.)
Power Supply (included)
Part Number for OBIS Single Laser Remote
1173961
Part Number for OBIS LX/LS SDR-Type Cable from Laser to Remote
1-meter
1179451
3-meter
1179858
0.3-meter
1197523
Part Number for OBIS Power Supply, 12VDC
1
2
3
4
1184491
Host computer not provided. USB cable provided. RS-232 cable not provided.
Digital modulation can be driven up to 5V.
Software operates on Windows 7.
Non-condensing.
OBIS LX/LS Single Laser Remote
Controls
Key Switch
Interlock
Connection
Power Input
I/O Connection:
Laser Ready, Fault, Base Plate Temp.,
Power Monitor, Slow Digital Modulation,
Laser Diode Current
RS-232
Status
Indicators
104
To Laser
Analog and Digital
SMB Connection
Illuminated
On/Off Switch
Superior Reliability & Performance
•
www.Coherent.com
USB
•
[email protected]
OBIS LX/LS Single Laser Remote
Full Feature Laser Remote and Power Supply
OBIS LX/LS Single Laser Remote
Mounting Brackets and Stacking Brackets
126 mm
(5.0 in.)
6.9 mm
(0.3 in.)
(included with OBIS LX/LS Single Laser Remote)
6.4 mm
(0.3 in.)
63.5 mm
(2.5 in.)
4X Slotted Holes
50 mm
(2.0 in.)
4X 7.1 mm
(0.3 in.)
Top
View
4X 8.1 mm
(0.3 in.)
139.9 mm
(5.5 in.)
108.1 mm
(4.3 in.)
37.8 mm
(1.5 in.)
Front View
Side View
Example of Stacking OBIS LX/LS Single Laser Remotes
(mounting bracket included, second remote sold separately)
Top
View
108.6 mm
(4.3 in.)
75.7 mm
(3.0 in.)
Front View
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Side View
Superior Reliability & Performance
105
OBIS LX/LS Single Laser Remote
Full Feature Laser Remote and Power Supply
OBIS Single Laser Power Supply
(included with OBIS LX/LS Single Laser Remote)
Cord Length:
1219.2 mm
(48.0 in.)
Top
View
104.4 mm
(4.1 in.)
Power Cord sold separately
Connector 2-Pin Male Molex
P/N SDA43025-0200
OBIS Single Laser Remote Power Supply
offers 12VDC output to the OBIS Remote
and has an universal input of 100-240 VAC
(47-63 Hz).
2X Contact Pin Molex
P/N 43030-0009
42 mm
(1.7 in.)
31 mm
(1.2 in.)
Pin 1
12 VDC
Pin 2
Ground
Front View
IEC-320-C14
Input Receptacle
OBIS Single Laser Remote requires a SDR-type cable to connect the Laser to the Remote. This
cable carries power, signals and communications. Available in 0.3m, 1m and 3m lengths. Sold
separately. (Note: if buying an OBIS Laser System then the OBIS laser is shipped with the OBIS
Single Laser Remote and a 1-meter SDR-type cable.)
SDR-type Connector
106
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LX/LS Single Laser Remote
Full Feature Laser Remote and Power Supply
Mechanical Specifications
OBIS LX/LS Single Laser Remote
104.9 mm
(4.1 in.)
32 mm 35.9 mm
(1.3 in.) (1.4 in.)
Top
View
67.5 mm
(2.7 in.)
Side
View
12 mm
(0.5 in.)
2 Places
43.5 mm
(1.7 in.)
2 Places
Front View
9.2 mm
(0.4 in.)
2 Places
Rear View
13.7 mm
(0.5 in.)
2 Places
4X #4-40 Threads
2 Places, Near and Far Side
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS LX/LS Single Laser Remotes. For full details of this warranty coverage, please refer to
the Service section at www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
107
OBIS LX/LS
6-Laser Remote
Laser Remote and Power Supply for up to Six Lasers
OBIS LX and OBIS LS laser products come with a variety of accessories to support
your application needs.
The OBIS 6-Laser Remote for OBIS LS and OBIS LX offers power to six lasers in a
convenient CDRH-compliant interface.
As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these
are on the back panel of every OBIS LX/LS laser.
To simplify integration the OBIS 6-Laser Remote connects to the 12VDC Power
Input on the back of the OBIS Laser. This allows the OBIS 6-Laser Remote to provide power On/Off to the laser.
For applications requiring laser status and control, the USB on the back of each
OBIS Laser can be used to communicate with the laser directly.
The OBIS 6-Laser Remote is not recommended for applications that require Analog or Digital Modulation.
OBIS 6-Laser Remote comes complete with mounting brackets and hardware to
mount the remote to a table or stack remotes.
OBIS LX/LS 6-Laser Remote
Features:
•Compact size
•Laser safety features (CDRH)
such as key switch and interlock
•Laser On/Off status indicators
•Compact single power supply
included
•Brackets for mounting and
stacking included
OBIS LX/LS 6-Laser Remote
Applications:
•Laboratories needing CDRH
features
•Applications wanting a simple
remote control to turn the lasers
On and Off
•Applications that do not require
Analog or Digital modulation
Figure 1: Individual labels included for the laser wavelength identification.
www.Coherent.com/OBIS6-LaserRemote
108
Superior Reliability & Performance
OBIS LX/LS 6-Laser Remote
Laser Remote and Power Supply for up to Six Lasers
System Specifications
OBIS LS/LX 6-Laser Remote
Laser Power Cables
Six, 1 meter each, color coded
Interlock Yes, included with shorting wire
Laser Status Indicators Yes
System and Key Switch Indicator
Yes
Warm-up Time (minutes)(from cold start) <1
Power Consumption (W)
Typical
Maximum
1 (laser not included)
2 (laser not included)
Power Input
Universal IEC-320
Power Cord (USA) 2.4m (8 ft.)
Operating Condition1 0 to 50°C (32 to 122°F)
Non-operating Condition1
-10 to +70°C (14 to 158°F)
Shock Tolerance (g)(6 ms) 20
Operating Voltage 90 to 264 VAC, 47 to 63 Hz
Dimensions (L x W x H) OBIS 6-Laser Remote Power Supply (included)
105 x 68 x 36 mm (4.1 x 2.7 x 1.4 in.)
189 x 89.4 x 47.1 ( 7.4 x 3.5 x 1.9 in.)
Weight OBIS 6-Laser Remote
Power Supply (included)
0.23 kg (0.5 lbs.)
0.9 kg (2.0 lbs.)
Part Number
OBIS 6-Laser Remote
OBIS Power Supply, 12VDC
1203909
1211389
Figure 2: FRONT VIEW. The OBIS 6-Laser Remote comes with
wavelength tags to identify each laser connected.
355
594
375
635
405
637
415
640
420
647
445
650
458
660
473
685
488
730
505
785
514
830
520
980
532
552
561
588
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
9 9 8 8 7 7 6 6 5 5 4 4 3 3 2 2
Non-condensing.
1 1 0 0
1
109
OBIS LX/LS 6-Laser Remote
Laser Remote and Power Supply for up to Six Lasers
Figure 3: REAR VIEW. Six color coded
power cables included. Interlock
included. Laser sold separately.
Figure 4: Single power supply included to drive six lasers with remote.
110
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LX/LS 6-Laser Remote
Laser Remote and Power Supply for up to Six Lasers
Figure 5: Six remote-to-laser power cables included. Color coded
for easy installation and identification. One meter length.
Figure 6: Power Supply with IEC-320 universal input. Includes On/Off switch.
Cable Length:
1220 mm ±25 mm
(48.0 in. ±1 in.)
Connector:
6-Pin Male Connector
MOLEX Part # 43025-0600
89.4 mm
(3.5 in.)
6X Contact Pin
MOLEX Part # 43030-009
189 mm
(7.4 in.)
Pins 1,2,3: Ground
Pins 4,5,6: 12VDC
4
6
1
3
47.1 mm
(1.9 in.)
On/Off Switch
IEC 320-C14 Input Receptacle
Universal 90/264VAC Capable Input
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
111
OBIS LX/LS 6-Laser Remote
Laser Remote and Power Supply for up to Six Lasers
OBIS LX/LS 6-Laser Remote
Mounting Brackets and Stacking Brackets
6.9 mm
(0.3 in.)
(included with OBIS LX/LS 6-Laser Remote)
126 mm
(5.0 in.)
6.4 mm
(0.3 in.)
63.5 mm
(2.5 in.)
4X Slotted Holes
50 mm
(2.0 in.)
4X 7.1 mm
(0.3 in.)
4X 8.1 mm
(0.3 in.)
Top
View
139.9 mm
(5.5 in.)
108.1 mm
(4.3 in.)
37.8 mm
(1.5 in.)
Front View
Side View
Example of Stacking OBIS LX/LS 6-Laser Remotes
(mounting bracket included, second remote sold separately)
Top
View
108.6 mm
(4.3 in.)
75.7 mm
(3.0 in.)
Front View
112
Superior Reliability & Performance
Side View
•
www.Coherent.com
•
[email protected]
OBIS LX/LS 6-Laser Remote
Laser Remote and Power Supply for up to Six Lasers
Mechanical Specifications
OBIS LX/LS 6-Laser Remote
104.9 mm
(4.1 in.)
32 mm
(1.3 in.)
Top
View
Side
View
67.5 mm
(2.7 in.)
12 mm
(0.5 in.)
2 Places
43.5 mm
(1.7 in.)
2 Places
35.9 mm
(1.4 in.)
Front View
9.2 mm
(0.4 in.)
2 Places
Rear View
13.7 mm
(0.5 in.)
2 Places
4X #4-40 Threads
2 Places, Near and Far Side
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS LS/LX 6-Laser Remotes. For full details of this warranty coverage, please refer to the
Service section at www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
113
OBIS LX/LS Heat Sink
Heat Sink with Fan for Thermal Management
OBIS LX/LS Heat Sink Features:
OBIS LX and OBIS LS laser products come with a variety of accessories to support
your application needs.
•Small footprint
As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. The OBIS laser comes with a Power Connection, USB Connection, Fan Connection and a SDR-type Connection for laser control I/O. All of these
are on the back panel of every OBIS LX/LS laser.
•Precision dowel pin laser
positioning
To simplify integration, the OBIS LX/LS accessories offer a separate Heat Sink with
an integrated fan. The Heat Sink offers a convenient way to raise the laser beam
height off the table and provide thermal management. The fan simply plugs into
the back of the OBIS LX or OBIS LS laser to receive 12V DC power.
•Integrated cooling fan with
vibration isolation
•Rugged design
•Convenient 69 mm (2.7 inch)
beam height
•Output beam centered on
standard table bolt pattern
•Universal mounting to imperial
or metric bolt pattern
•Proven stable performance over
time and temperature
•Fan power connector plugs directly
to OBIS Laser Head
•Laser can be mounted on top or
side for opposite polarization
www.Coherent.com/OBISHeatSink
114
Superior Reliability & Performance
OBIS LX/LS Heat Sink
Heat Sink with Fan for Thermal Management
Top and Side Mount Plug Holes
Allow for Heat Sink to be mounted in either direction. Need horizontal polarization – mount the Heat Sink with the laser on the side.
Top Mount
Plug Holes
Remove Plastic
Hole Plugs to Install
Screws (provided) to
Mount onto Table
Connector 2 Pos
Vendor: Molex
Vendor Part: 51021-0200
Side Mount
Plug Holes
Toll Free: (800) 527-3786
•
Optional: Mount Heat Sink on its
side for special applications that
may require horizontal polarization
Tel: (408) 764-4983
•
Superior Reliability & Performance
115
OBIS LX/LS Heat Sink
Heat Sink with Fan for Thermal Management
Mechanical Specifications
OBIS LX/LS Heat Sink
Top View
100.8 mm (3.97 in.)
12 mm
(0.47 in.)
0.0 OBIS
Datum Point
2x M4
20.5 mm
(0.8 in.)
8
4x M3
6 mm (0.24 in.)
87.5 mm
(3.44 in.)
8.33 mm (0.33 in.)
0 mm
(0.0 in.)
3.5 mm
(0.14 in.)
8.5 mm
(0.33 in.)
23.5 mm
(0.93 in.)
2 x 8-32
3x OBIS
Alignment Pins
25.4 mm
(1.0 in.)
25 mm
(0.98 in.)
30 mm
(1.18 in.)
Threads for
Accessory Mounting
Connector 2 Pos
Vendor: Molex
Vendor Part: 51021-0200
Front View
Rear View
50 mm (1.97 in.)
Side View
50 mm (1.97 in.)
Fan
165.2 mm (6.5 in.)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS LS/LX Heat Sinks. For full details of this warranty coverage, please refer to the Service
section at www.Coherent.com or contact your local Sales or Service Representative.
116
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LX/LS Laser Box
Laser Mount with Cooling, Interface and Power Supply
OBIS LX/LS Laser Box Features:
OBIS LX and OBIS LS laser products come with a variety of accessories to support
your application needs.
The OBIS Laser Box for OBIS LS and OBIS LX offers all the features from the laser in a convenient CDRH-compliant interface with convection cooling for five lasers.
As with all OBIS LX and OBIS LS lasers, the laser itself offers a stand-alone all-inone laser solution. OBIS lasers come with a Power Connection, USB Connection,
Fan Connection and a SDR-type Connection for laser control I/O. All of these are
on the back panel of every OBIS LX/LS laser.
To simplify integration, the OBIS Laser Box connects to the single SDR-type connector for power, signals and communication. The OBIS Laser Box then brings all
of these features to the front panel controls and connectors.
The OBIS Laser Box offers stability over temperature with conduction cooling for
the laser baseplate and cooling fans to maintain the convection cooling.
Every OBIS Laser Box comes with a separate 12V DC power supply with capacity to drive the five lasers, interface and cooling.
•Integrated five bay mount for
OBIS lasers
•Heat sinks and cooling fans
•Modulation inputs for analog
and digital for five lasers
•USB and RS-232 interface for
additional control from host
computer
•Coherent Connection software
for PC
•Status indicators for each laser
•External power supply
•Laser safety features such as
key switch and interlock
OBIS LX/LS Laser Box Applications:
•Laboratories needing CDRH
features
•Applications wanting a simple
Analog or Digital inputs to control
the laser
•Applications wanting thermal
management (cooling) for the
lasers
www.Coherent.com/OBISLaserBox
Superior Reliability & Performance
117
OBIS LX/LS Laser Box
Laser Mount with Cooling, Interface and Power Supply
System Specifications
OBIS LS/LX Laser Box
OBIS Laser Box
Laser Box – five bay1 Power Supply2 Part #1228877
Included
Host Computer Remote Control via USB3 USB 2.0, Mini B
Host Computer Remote Control via RS-2323
RS-232, 115.2K, 8N1, DB-9F
Analog Inputs, 5 each SMB Connector, 0V to 5V, 2000 Ohm input impedance
Digital Inputs4, 5 each SMB Connector, 0V to 3V, 50 Ohm input impedance
Interlock Yes, included with shorting wire
Laser Status Indicators Yes, Individual LED for each Laser
Warm-up Time (minutes)(from cold start) <2
Coherent Connection Software for PC Included on USB drive with user manual
Safety Key switch and interlock
Utility and Environmental Requirements
Power Consumption (W)(typical) 5 (without lasers)
Power Consumption (W)(maximum) 140 (with 5 lasers)
Internal Cooling Fan Yes, 3 each
Power Input to Laser Box, 6 Pin (VDC) 10 to 14 at 10A maximum, Molex P/N 43025-0600 for mating connector
Power Cord (USA) 2.4m (8 ft.)
Operating Condition5 (°C) 10 to 40 for OBIS LX, 10 to 35 for OBIS LS
Non-operating Condition5 (°C) -10 to 60
Shock Tolerance (g)(6 ms) 20
Operating Voltage (VAC) 90 to 264, 47 to 63 Hz
Dimensions (L x W x H) Laser Box
Power Supply
241 x 184 x 88 mm (9.5 x 7.3 x 3.5 in.)
189 x 89.4 x 47.1 mm (7.4 x 3.5 x 1.9 in.)
Weight
1
2
Laser Box
Power Supply
3.9 kg (8.5 lbs.)
0.9 kg (2.0 lbs.)
Lasers sold separately.
Power supply included. Order item number 1211389 for spare or replacement.
Example of OBIS Laser System
Figure 1: Laser Box with the lid removed
3
4
Host computer not provided. RS-232 and USB cable not provided.
Digital Modulation can be driven up to 5 Volts.
5
Non-condensing.
Figure 2: Laser Box example as part of a Galaxy beam combiner system.
Lasers and Galaxy Beam Combiner sold separately.
Figure 3: Laser Box example with 5 lasers installed. Lasers sold separately.
118
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
OBIS LX/LS Laser Box
Laser Mount with Cooling, Interface and Power Supply
Mechanical Specifications
OBIS LS/LX Laser Box
Top View
279.4 mm (11.0 in.)
With Top Cover Removed
86.2 mm
(3.4 in.)
87.8 mm
(3.5 in.) to
Rubber Feet
275 mm (10.8 in.)
5 Bays for
OBIS Lasers
135.8 mm
(5.3 in.)
Ø7.0 (3) Thru (8X)
123.1 mm
(4.8 in.)
96.6 mm
(3.8 in.)
50 mm 76.2 mm
(2.0 in.) (3.0 in.)
84.6 mm
(3.3 in.)
184.2 mm
(7.3 in.)
205.0 mm
(8.1 in.)
160.5 mm
(6.3 in.)
116.1 mm
(4.6 in.)
71.6 mm
(2.8 in.)
27.2 mm
(1.1 in.)
0 mm
(0.0 in.)
Side View
(Mounting Bracket
Ø11.4 (0.5 in.) Shown Removed)
Laser Interlock
Fiber/Free Space
Beam Exit Holes (5X)
USB Communications
Mini-B
Power
Power Button
System Status LED
Key Switch
Holes for Mounting
OBIS Galaxy Unit
4X #4 Countersink
Clearance Hole from
Opposite Side
Included Hole Cover
Plugs Not Shown
Analog/Digital
Modulation Input
and Status LED
for Each Laser
Removable
Mounting
Brackets (2X)
62.3 mm
(2.5 in.)
Rear View
204.2 mm
(8.0 in.)
208.6 mm
(8.2 in.)
0 mm
(0.0 in.)
0 mm
(0.0 in.)
28 mm
(1.1 in.)
241.3 mm
(9.5 in.)
85.7 mm
(3.4 in.)
Air Intake
with Cleanable
Air Filters
14.2 mm
(0.6 in.)
4-40 Tapped Holes (2X)
3.6 mm (0.14 in.) Deep Both Sides
OBIS 6-Laser Remote
Power Supply
Air Exhaust, 3X
<509 L/min. (18 CFM) Total
RS-232
Communications
Front View
Cord Length:
1219.2 mm
(48 in.)
Part #1211389 included
89.4 mm
(3.5 in.)
189 mm
(7.4 in.)
47.1 mm
(1.9 in.)
IEC-320-C14
Input Receptacle
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all OBIS Laser Boxes. For full details of this warranty coverage, please refer to the Service
section at www.Coherent.com or contact your local Sales or Service Representative.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
119
Sapphire Driver Unit
Operate, Control and Monitor Sapphire Laser Heads
Sapphire Driver Unit Features:
The Sapphire Driver Unit provides controller and power supply in a wall plugready box, featuring a standby/laser ON switch and remote control options via
Analog, RS-232 and USB interface.
The Driver Unit enables and simplifies stand-alone applications: it can operate,
control and monitor all laser heads of the Sapphire line: Sapphire LP, Sapphire FP,
Sapphire SF. A Sapphire CDRH laser head and a Sapphire Driver Unit when properly installed will be CDRH compliant.
•One-box wall plug controller
and power supply
•Enables stand-alone applications
(CDRH Compliant)
•Standby/Laser ON key switch
•Remote interlock
•Remote control option via Analog,
RS-232, or USB interface
•Laser power adjustment and
graphic display (optional)
•Front panel control with laser
power adjustment and status
display (optional)
•Status LEDs
Sapphire Driver Unit for:
•Sapphire LP
•Sapphire FP
•Sapphire SF
www.Coherent.com/SapphireDriverUnit
120
Superior Reliability & Performance
Sapphire Driver Unit
Operate, Control and Monitor Sapphire Laser Heads
Utility and Environmental Requirements
Sapphire Driver Unit
Power Consumption (VA) <140
Operating Voltage 88 to 264 VAC, 50/60 Hz
Ambient Temperature
Operating Conditions Non-Operating Condition 10 to 40°C (50 to 104°F), non-condensing
-30 to 60°C (-22 to 140°F)
Dimensions1 (L x W x H) 196 X 164 X 99.5 mm (7.72 x 6.46 x 3.92 in.)
Cable Length (Head to Controller) 2 m (6.56 ft.), optional 5 m (16.4 ft.)
Weight 1.85 kg (4.08 lbs.)
Measurement Tools
Meter FieldMax™-TO
Sensor PS10Q
Please consider additional space for the front panel switches and the cable connections on the rear panel.
0 mm (0 in.)
6.4 mm (.25 in.)
16.4 mm (.65 in.)
Toll Free: (800) 527-3786
72 mm
(2.83 in.)
•
84 mm
(3.31 in.)
19 mm
(.75 in.)
50 mm
(1.97 in.)
Airflow
6 mm (.24 in.)
0 mm (0 in.)
Airflow
Dowel pin
(3 pcs)
Tel: (408) 764-4983
Laser
Emission
Indicator
A
80 mm
(3.149 in.)
Beam
22.50 mm
(.89 in.)
135 mm (5.31 in.)
147 mm (5.79 in.)
158 mm (6.22 in.)
170 mm (6.69 in.)
180 mm (7.09 in.)
192.50 mm (7.58 in.)
196.50 mm (7.74 in.)
7 mm
(.28 in.)
4.50 mm
(1.77 in.)
0 mm (0 in.)
8 mm (.31 in.)
20 mm (.78 in.)
69 mm (2.72 in.)
70.40 mm
(2.77 in.)
•
102.50 mm
(4.035 in.)
The optional laser emission indicator is located at
the end of a 5 m (16.4 ft.) cable which connects to
the rear panel of the driver unit. This indicator
shall be mounted at the front of the optional heat
sink near the beam aperture (required for CDRH
compliant operation only).
121.9 mm (4.79 in.)
131 mm (5.16 in.)
1
Superior Reliability & Performance
121
Sapphire Driver Unit
Operate, Control and Monitor Sapphire Laser Heads
Mechanical Specifications
Top View
Front View
(Display Version)
Side View
Rear View
(Display Version)
196 mm
(7.72 in.)
Front View
(Non-Display Version)
Rear View
(Non-Display Version)
90 mm
(3.54 in.)
Key
Switch
164 mm
(6.46 in.)
9.5 mm
(0.37 in.)
Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice.
Coherent’s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered
by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, 1976.
Coherent offers a limited warranty for all Sapphire lasers. For full details of this warranty coverage, please refer to the Service section
at www.Coherent.com or contact your local Sales or Service Representative.
122
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Laser Measurement
and Control Accessories.
MX 460 Meter, Sensor and Accessory Compatibility
LaserMeter
Sensor
Accessory
OBIS FP
FieldMaxII-TO
PS10
OBIS LG 355
FieldMaxII-TO
PS10
Structured Light Flat Top Projector
Please Call Factory
Please Call Factory
CUBEFieldMaxII-TO
PS10Q
OBIS FieldMaxII-TO
PS10Q
CUBE FP (Collimated Beam)
FieldMaxII-TO
PS10Q
CUBE FP (FC/PC)
FieldMaxII-TO
PS10
Radius
FieldMaxII-TO
PS10Q
Miniature Diode Laser Module
FieldMaxII-TO
PS10Q
Compass 115M
FieldMaxII-TO
PS10Q, OP-2 VIS
Sapphire LP
FieldMaxII-TO
PS10Q
Sapphire FP
FieldMaxII-TO
PS10Q
Sapphire SF
FieldMaxII-TO
PS10Q
Sapphire Driver Unit
FieldMaxII-TO
PS10Q
Genesis CX Series
FieldMaxII-TO
PS10Q
Genesis MX Series STM (OEM)
FieldMaxII-TO
PM10
Genesis MX Series MTM (OEM)
FieldMaxII-TO
PM10
Chameleon Ultra
FieldMaxII-TO
PM10
Chameleon Vision
FieldMaxII-TO
PM10
Chameleon Vision-S
FieldMaxII-TO
PM10
Chameleon PreComp
N/A
N/A
Chameleon MPX
FieldMaxII-TO
PM10
Product Name
Part Number
OP-2 VIS
1098313
PM10
1097901
PS10Q
1098400
PS10 1098350
FC Fiber Adapter
0012-3863
FieldMaxII-TO
Toll Free: (800) 527-3786
FC Fiber Adapter
FC Fiber Adapter
1098579
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
123
Notes
124
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Notes
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
125
Notes
126
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Doing Business
with Coherent.
Ordering
We accept orders online at www.Coherent.com
(CUBE only), by phone, fax, e-mail or mail.
When confirming an order that has been placed,
please indicate “confirming” on the order.
Warranty
Goods are warranted to be free from defects and to
work in the manner specified for a period of 12 months
from date of shipment. Extended warranty is available
on some products.
Pricing
Prices indicated are current at the time of publication,
but we reserve the right to change these without notice.
Prices are FOB origin, and do not include freight, duty or
any applicable taxes.
Specifications
Specifications are current at the time of publication,
but Coherent reserves the right to change these without
prior notice.
Please consult our local Sales Office or Distributor for
Export prices.
Terms of Payment
Acceptable terms of payment for domestic orders
include cash with order, major credit card, COD or
Net 30 with prior approval of credit.
Export terms are strictly letter of credit, cash in advance
or major credit card.
Shipping
Shipment means are at the discretion of Coherent, but
we will attempt to meet your special requests. We do
not take responsibility for any delays or damage caused
by the shipper.
Technical Information
The technical information provided in this catalog is
intended to be helpful in the application of Coherent
products, but we do not accept responsibilty for its use.
Terms and Conditions of Sale
Terms and Conditions of Sale are specific to each
country in which Coherent operates. They are supplied
with all quotations and invoices and can be sent by fax
or mail on request. Nothing in the foregoing statements
modifies the Terms and Conditions in effect for each
country of operation.
Returns
Returns are accepted only after a return authorization
number has been obtained from Coherent, and credit
will be allowed for goods returned under authorization
in good condition.
Order Cancellation
Cancellation of orders will incur a termination charge
of not less than 10% of the order value, and Coherent
reserves the right to charge for all costs incurred in
support of any cancelled order.
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
127
How to Contact Us.
Contact Us by Phone
Coherent, Inc.
(800) 527-3786 or (408) 764-4983
Benelux: +31 (30) 280 6060
China: +86 (10) 8215 3600
France: +33 (0)1 8038 1000
Germany/Austria/Switzerland: +49 (6071) 968 333
Italy: +39 (02) 31 03 951
Japan: +81 (3) 5635 8680
Korea: +82 (2) 460 7900
Taiwan: +886 (3) 505 2900
United Kingdom/Ireland: +44 (0) 1353 658833
Contact Us by Email
Laser Products: [email protected]
Laser Measurement: [email protected]
Service: [email protected]
All Coherent product names are trademarks of Coherent, Inc.
*All products indicated by an asterisk are registered trademarks of their respective companies.
128
Superior Reliability & Performance
•
www.Coherent.com
•
[email protected]
Elevate Your Life Sciences
Application.
Explore Coherent’s Complete Laser Portfolio and
Find Your Solution by Visiting Our Website.
www.Coherent.com/
LasersLifeSciences
Accessories
Application Reports
Enhanced Application Finder
Technical Illustrations, Videos
Brochures, Tech Notes, Data Sheets
Toll Free: (800) 527-3786
•
Tel: (408) 764-4983
•
Superior Reliability & Performance
129
Coherent, Inc.
5100 Patrick Henry Drive
Santa Clara, CA 95054
United States
Toll Free: 1-800-527-3786
Tel: (408) 764-4983
Fax: (408) 764-4646
www.Coherent.com
Germany/Austria/Switzerland
Coherent GmbH
Dieselstraße 5b
D-64807 Dieburg
Germany
Tel: +49-6071-968-333
Fax: +49-6071-968-499
www.Coherent.de
China
Coherent Inc., Beijing
Room 1006-1009,
Raycom Info Park Tower B,
No. 2, Kexueyuan South Road
Haidian District
Beijing, 100190, China
Tel: 86-10-8215-3600
Hotline Mainland China Only:
+86-4006100209
www.Coherent.com.cn
Italy
Coherent Italia
Via Borgese, 14
Milano, 20154
Italy
Tel: +39-02-31-03-951
Fax: +39-02-31-03-95-55
www.Coherent.it
France
Coherent France
Parc Technopolis
3, Avenue du Canada
Bâtiment Zeta
91978 Courtaboeuf cedex
France
Tel: +33-1-80-38-10-00
Fax: +33-1-80-38-10-01
www.Coherent.fr
Printed in the U.S.A. MC-001-16-1M1115
Copyright © 2015 Coherent, Inc.
Japan
Coherent Japan, Inc.
Toyo MK Building
7-2-14 Toyo
Koto-ku, Tokyo 135-0016
Japan
Tel: +81 3-5635-8680
Fax: +81 3-5635-8701
www.Coherent.co.jp
Korea
No. 101, Eagle Town
278-20, 3 dong
Seongsu 2 ga
Seongdong-gu, Seoul
133-832, South Korea
Tel: +82 2 460 7900
www.Coherent.com
Netherlands
Coherent B.V.
Smart Business Park
Kanaalweg 18A
3526 KL Utrecht
Netherlands
Tel: +31-30-280-6060
Fax: +31-30-280-6077
www.Coherent.nl
Taiwan
Coherent Taiwan
2F-5, No. 38. Taiyuan St.
Zubei City,
Hsinchu County 30265
Taiwan
Tel: +886-3-505-2900
www.Coherent.com
United Kingdom/Ireland
Coherent UK Ltd.
St Thomas’ Place
Cambridgeshire Business Park
Ely
CB7 4EX
England
Tel: +44-1353-658-833
Fax: +44-1353-659-110
www.Coherent.com
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IIIb LASER PRODUCT.
VISIBLE AND INVISIBLE LASER RADIATION.
AVOID EYE OR SKIN EXPOSURE TO
DIRECT OR SCATTERED RADIATION.
CLASS IV LASER PRODUCT.
350 nm to 1100 nm
<500 mW
400 nm to 700 nm
<10W