Download iFLEX-iRISTM Laser systems with fiber delivery
Transcript
iFLEX-iRIS Laser systems with fiber delivery TM The Qioptiq iFLEX-iRIS™ solid state laser systems offer high performance stability with low amplitude noise in a miniaturized package. They are ideally suited for integration into instruments that demand high Some of the product features include: Product features include: • High stability operation performance yet need to retain a small form factor. The • High beam quality lasers are mode-hop free and wavelength stabilized as a • Low noise result of active temperature control. • Miniaturized size for easy integration control mode using an internal feedback loop. This • Integrated electronics and TEC temperature stabilized control feature provides highly stable output power, and ensures • Conductively cooled through baseplate All CW iFLEX-iRIS lasers operate in automatic power the high power stability performance is maintained throughout the product lifetime. • Mechanical shutter • Electronic shuttering Well controlled digital modulation can be offered through the electrical interface PINs. This feature must be selected with order. Increased freedom of design and ease of servicing is offered with the detachable kineFLEX® single-mode polarization maintaining fiber delivery system. Fiber may Options include: • Over 100 standard single-mode polarization maintaining fiber delivery options using the detachable kineFLEX • Digital modulation be selected with order or fitted by customers as a later • CDRH compliant interlock unit upgrade option, to iFLEX-iRIS lasers with a centralised • Adaptor cable when an iFLEX-iRIS is used as a retrofit replacement for an iFLEX2000™ laser output beam. This detachable fiber delivers true “Plug & Play” design freedom. • Industry compatible footprints and beam exit positions • OEM laser versions on request PSM1035_1 • OEM fiber versions on request 1 of 8 iFLEX-iRIS specification overview Operating Wavelengths Wavelength (nm) 375 405 445 450 458 473 488 515 520 633 640 660 670 730 780 830 852 nm Power from laser (mW) 15, 20, 50 50, 100, 150, 220 20, 30, 75 30, 75 20 75 20, 50, 100, 120 20, 60 30, 75 30, 75 20, 50, 80 20, 50, 80 10 20 15, 50 20, 50, 80 40 mW Power after fiber output (mW) 10, 30 30, 50, 100, 150 20, 50 20, 50 20 50 20, 50, 80 40 20, 50 20, 50 20, 50 20, 50 6 10 10, 30 20, 50 30 mW Technical Specifications Laser parameters Fiber parameters Center wavelength ±5 nm Power stability (8 hours) <1 % Optical Noise (20Hz-2MHz) < 0.1* % rms 0.7 mm > 100:1 - 12V DC, 1A - Max. base plate temp. 40 ºC Max. heat dissipation 12 W Beam diameter at 1/e2 Polarization ratio Electrical Power supply Operation Modes CW Digital Modulation 0 - 100% power adjustment TTL signal - Rise time (10% to 90%) <1 µsec Fall time (90% to 10%) <1 µsec Modulation bandwidth 500 kHz Laser with kineMATIX® 70(L) x 40(W) x 38(H) mm 1142(L)x **51(W)x **51(H) mm 1 to 3 Fiber jacket m Stainless steel, 5mm OD Single-mode polarization maintaining Fiber type Collimated fiber output beam Beam diameter 0.7mm mm M squared typ 1.1 - ≤1 μrad/ºC Pointing stability Beam divergence Diffraction Limited Mechanical dimensions Ø12 x 50 mm Beam position ≤ ± 0.15 mm Beam angle ≤ ± 0.5 mrad Connectorized output beam Single-mode polarization maintaining fiber FCP (polarization keyed), FCP8, APC (polarization keyed and 8 degree polished) Environmental conditions Storage temp. Laser Dimensions Laser only Fiber length Operating pressure Operating temp. Operating humidity 10 to 50 Atmospheric 10 to 40 ºC ºC Non-condensing, dew point <20°C Custom OEM versions on request 2 of 8 PSM1035_1 *Model specific please contact Qioptiq for details **Full extension travel on kineMATIX adjustment screws. Typical setting is 48.5mm(W) x 48.5(H) iFLEX-iRIS specification overview Operating Wavelengths: 532nm & 561nm Wavelength (nm) 532 561 Power from laser (mW) 20, 40 20, 40 Power after fiber output (mW) 30 30 Technical Specifications Laser parameters Fiber parameters Center wavelength ±2 nm Power stability (8 hours) <2 % Optical Noise (20Hz-2MHz) < 0.3* % rms 0.7 mm > 100:1 - 12V DC, 1A (laser) - Max. base plate temp. 40 ºC Max. heat dissipation 12 W Beam diameter at 1/e2 Polarization ratio Electrical Power supply Operation Modes CW 50 - 100% power adjustment Laser Dimensions Laser only 70(L) x 40(W) x 38(H) mm Laser with kineMATIX® 142(L) x 51**(W) x 51**(H) mm Fiber length 1 to 3 Fiber jacket m Stainless steel, 5mm OD Single-mode polarization maintaining Fiber type Collimated fiber output beam Beam diameter 0.7mm mm M squared typ 1.1 - ≤1 μrad/ºC Pointing stability Beam divergence Diffraction Limited Mechanical dimensions Ø12 x 50 mm Beam position ≤ ± 0.15 mm Beam angle ≤ ± 0.5 mrad Connectorized output beam Single-mode polarization maintaining fiber FCP (polarization keyed), FCP8, APC (polarization keyed and 8 degree polished) Environmental conditions Storage temp. Operating pressure Operating temp. Operating humidity 10 to 50 Atmospheric 10 to 40 ºC ºC Non-condensing, dew point <20°C 3 of 8 PSM1035_1 *Model specific please contact Qioptiq for details **Full extension travel on kineMATIX adjustment screws. Typical setting is 48.5mm(W) x 48.5(H) Custom OEM versions on request (1) iFLEX-iRIS laser with centralized beam exit position Note: it is possible to attach a kineFLEX fiber delivery system to the iFLEX-iRIS laser with centralized beam exit position. The kineFLEX can be attached by customers, as a future upgrade option. 64 TY VOID OVED 30 5 40 WARRAN IF REM 3 4 MOUNTING HOLES, Ø3.2 15.0 70 WARRAN IF REM LASER APERTURE 15.0 LASER CONTROL I/O LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT CW EMISSION <500mW 400-410nm IEC60825-1:2007 19.0 21 38 STATUS 33 7.5 1.0 15 7.5 SERIAL No 63.5 3.0 20.0 20.0 M3x0.5 IN 4 POSITIONS DOWEL HOLE Ø2.02/2.03 x 3 DEEP DOWEL SLOT Ø2.02/2.03 x 3 DEEP iFLEX-iRIS electrical interface 1 8 15 PinFunction 1 Monitor Photodiode Output (Vmon) 2 Operating Current Output (Vop) 3 External Power Control 4 Laser Enable 5 Temperature OK Signal 6Reserved 7 Laser Supply Voltage 8Reserved 9Reserved 10Reserved 11 Chassis Ground 12 Digital Modulation Input 13Reserved 14 0V Laser Supply 15 0V Signal Return Please refer to iFLEX-iRIS user manual for detailed instructions on electrical control via PINs. 4 of 8 PSM1035_1 9 (2) iFLEX-iRIS laser with offset beam exit position Note: the kineFLEX fiber delivery system cannot be fitted directly to the iFLEX-iRIS laser with offset beam exit position. 64 TY VOID OVED 30 5 40 WARRAN IF REM 3 4 MOUNTING HOLES, Ø3.2 WARRAN IF REM 70 LASER CONTROL I/O LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT CW EMISSION <500mW 400-410nm IEC60825-1:2007 19.0 21 38 33 STATUS SERIAL No 1.0 15 63.5 3.0 15.5 15.5 LASER APERTURE DOWEL HOLE Ø2.02/2.03 x 3 DEEP DOWEL SLOT Ø2.02/2.03 x 3 DEEP iFLEX-iRIS electrical interface 1 Other industry footprints and beam offsets may be available. Please contact Qioptiq Sales for details. 8 15 PinFunction 1 Monitor Photodiode Output (Vmon) 2 Operating Current Output (Vop) 3 External Power Control 4 Laser Enable 5 Temperature OK Signal 6Reserved 7 Laser Supply Voltage 8Reserved 9Reserved 10Reserved 11 Chassis Ground 12 Digital Modulation Input 13Reserved 14 0V Laser Supply 15 0V Signal Return Please refer to iFLEX-iRIS user manual for detailed instructions on electrical control via PINs. 5 of 8 PSM1035_1 9 (3) iFLEX-iRIS laser with fiber coupled output This iFLEX-iRIS includes a kineFLEX single-mode polarization maintaining fiber delivery system. Please refer to the kineFLEX datasheet for full details of all standard options. Please contact Qioptiq Sales to discuss any Ø12.0 customized outputs or beam shaping required. 50.0 FIBER ASSY. SERIAL No SERIAL TY VOID OVED 30 40 WARRAN IF REM 4 MOUNTING HOLES, Ø3.2 64 WARRAN IF REM 142 LASER CONTROL I/O LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT CW EMISSION <500mW 400-410nm IEC60825-1:2007 19.0 21 38 33 STATUS SERIAL No 1.0 63.5 3.0 20.0 20.0 15 iFLEX-iRIS electrical interface 1 DOWEL HOLE Ø2.02/2.03 x 3 DEEP DOWEL SLOT Ø2.02/2.03 x 3 DEEP 8 15 PinFunction 1 Monitor Photodiode Output (Vmon) 2 Operating Current Output (Vop) 3 External Power Control 4 Laser Enable 5 Temperature OK Signal 6Reserved 7 Laser Supply Voltage 8Reserved 9Reserved 10Reserved 11 Chassis Ground 12 Digital Modulation Input 13Reserved 14 0V Laser Supply 15 0V Signal Return Please refer to iFLEX-iRIS user manual for detailed instructions on electrical control via PINs. 6 of 8 PSM1035_1 9 iFLEX-iRIS CDRH compliant interlock unit For CDRH compliance a bench top standalone laser system must be used with a CDRH compliant interlock unit power supply. Qioptiq is pleased to offer this iFLEX-iRIS CDRH compliant interlock unit for use with the iFLEX-iRIS laser systems. Note: The iFLEX-iRIS CDRH compliant interlock unit includes keyswitch, interlock plug, remote interlock switch and power supply. This CDRH compliant interlock unit is recommended for bench top use. ~40cm CORD 31mm 131mm 82mm End panel views of the iFLEX-iRIS™ interlock control unit detailing the location of the different connectors and indicators iFLEX-iRIS OEM power supply When iFLEX-iRIS lasers are integrated into OEM instrumentation then power may be supplied directly from the instrument or from an OEM power supply. Qioptiq is pleased to supply this OEM power supply for the iFLEX-iRIS and iFLEX2000 laser systems. 1.35m ±0.05 7 of 8 PSM1035_1 C INC ON E L E C T R ONIC S C O.,L T D. C A UT ION: A C A DA P T E R 011626 FERRITE iFLEX – iRIS – X0 - - 0.7 - - iFLEX-iRIS Adaptor Cable Laser Wavelength (nm) This allows an iFLEX-iRIS Beam Diameter (mm) to be installed in place of an iFLEX2000, as a retrofit laser system. iFLEX – iRIS – X0 - 0.7 Laser Power (mW) Laser Wavelength (nm) Operating mode (CW = NP, Digital modulation = T) iFLEX-iRIS Order Codes Beam Diameter (mm) Laser Power (mW) iFLEX – iRIS – X0 - 0.7 Operating mode (CW = NP, Digital modulation = T) Laser Wavelength (nm) - Beam Diameter (mm) Laser Power (mW) iFLEX – iRIS – X2 - 0.7 Operating mode (CW = NP, Digital modulation = T) Laser Wavelength (nm) Beam Diameter (mm) iFLEX – iRIS – X2 - 0.7 Laser Power (mW) Laser Wavelength (nm) Operating mode (CW = NP, Digital modulation = T) Beam Diameter (mm) Laser Power (mW) iFLEX – iRIS – X2 - 0.7 Operating mode (CW = NP, Digital modulation = T) Laser Wavelength (nm) - - - Beam Diameter (mm) iFLEX - iRIS (mW) - P Laser Power - - - - SM PM Fiber type(CW = NP, Digital modulation = T) Operating mode Fiber length (m) iFLEX - iRIS - P Laser Wavelength (nm) SM PM Fiber type Fiber output (0.7mm, FCP, FCP8 or APC) Fiber length (m) Laser power after fiber (mW) Laser Wavelength (nm) iFLEX - iRIS P =- NP, Digital modulation -= T) Operating mode- (CW Fiber output (0.7mm, FCP, FCP8 or APC) SM PM Fiber type Laser power after fiber (mW) These lasers are Fiber length (m)designed and manufactured in a factory with ISO9001:2008 certification. These lasers are CE certified. Operating = NP, Digital modulation = T) These lasersmode meet (CW the requirements for IEC60825. Only lasers used with the CDRH compliant interlock unit meet CDRH Laser Wavelength (nm) requirements. The fiber optic output can increase laser hazard. Please follow recommended laser safety guidelines when using lasers. iFLEX-iRIS-P the iFLEX-iRIS laser with kineFLEX fiber delivery including kineMATIX-P2 fiber coupler. Fiber these output (0.7mm, FCP, FCP8isor APC) Laser power after fiber (mW) Qioptiq Photonics Ltd. [email protected] phone +44 (0) 2380 744 500 www.qioptiq.com iFLEX-iRIS™ is a trademark of Qioptiq Photonics Ltd. Copyright ©2014 Qioptiq Photonics Ltd. VISIBLE AND INVISIBLE LASER RADIATION AVOID EXPOSURE TO BEAM CLASS 3B LASER PRODUCT <500mW IEC60825-1:2007 VISIBLE AND INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION CLASS 4 LASER PRODUCT >500mW IEC60825-1:2007 8 of 8 PSM1035_1 technical information contact:= T) Operating modeFor (CW = NP, Digital modulation