Download User Manual

The objective of the Relation is to define the connection between parameter values and
part. If the part depends on parameter, it should be defined in Relations.
When creating the BoM for the product with parameter(s), instead of parts, Relation
should be chosen from drop-down list.
If the Parameter changes the quantity of the part, the quantity of the part should be
defined for every Parameter value in a BoM.
Watch demo video here: https://youtu.be/GQrbX0Y02ws
Parallel execution of work operations
This function allows specifying in the Routing that an operation is divided between all
work stations of the same type.
When this function is On, you have an ability to check a box Parallelize in a Routing. In
that case the operation will be divided between all work stations of the same type.
Piece payment
This function allows defining in the Routing that a worker is paid per one piece or per
operation.
Overlap and sequence of manufacturing operations
This function allows configuring a special sequence and overlapping of production
operations in the Routing.
Serial numbers
This function allows using unique serial numbers on products and parts.
NB! This is for tracking every item individually. If you wish to track Batch No./Lot No., you
do not need this function.
Co-product
This function allows getting several final products as a result of one manufacturing order.
Co-products are added to stock when they are reported by workers in My production
plan or Internet-kiosk when they pause or finish some production operation.
Also, you can report produced bi-products instead of workers in manufacturing order if
you open some manufacturing operation.
Co-products must be previously configured in BOM.
Create a special product, for example "Waste" or “Scrap”, and use this function to report
such additional product. Add it as a co-product to your BOMs.
13