Download spitronics tcu - No Problem Technologies

Solenoid no 1 is engaged and the Green LED indicates if Shift Solenoid no 2 is engaged. This is handy to
see if and when the TCU shift between different gears.
6.7.3 Solenoid Setup (Alt 2)
These options are used to set up different Shift Solenoid configurations for each shifter position, as well as
the different gears in the shifter positions, if they are allowed. Most firmware is preprogrammed and will not
allow the user to change any of these settings.
6.7.4 Maps (Alt 1)
6.7.5 Gear Maps (Alt 1)
These Maps are used to set up gear to shift on its own pattern and according to certain criteria. It is important