Download RV Manual - Tweak Software

Transcript
CHAPTER 11. NODE REFERENCE
RVDisplay
Property
color.channelOrder
Type
string
Size
1
color.channelFlood
int
1
color.gamma
color.sRGB
color.Rec709
color.brightness
float
int
int
float
1
1
1
1
color.outOfRange
int
1
color.active
lut.lut
lut.prelut
lut.scale
lut.offset
lut.inMatrix
lut.max
lut.name
lut.file
lut.size
int
float
float
float
float
float
float
string
string
int
1
div 3
div 3
1
1
16
1
1
1
1 or 3
lut.active
lut:output.size
lut:output.lut
int
int
float
1
1 or 3
div 3
Description
A four character string containing any of the characters
[RGBA10]. The order allows permutation of the normal R G B
and A channels as well as filling any channel with 1 or 0.
If 0 pass the channels through as they are. When the value is 1,
2, 3, or 4, the R G B or A channels are used to flood the R G and
B channels. When the value is 5, the luminance of each pixel is
computed and displayed as a gray scale image.
A single gamma value applied to all channels, default = 1.0
If non-0 a linear to sRGB space transform occurs
If non-0 the Rec709 transfer function is applied
In relative stops, the final pixel values are brightened or dimmed
according to this value. Occurs after all color space transforms.
If non-0 pass pixels through an out of range filter. Channel values
in the (0,1] are set to 0.5, channel values [-inf,0] are set to 0 and
channel values (1,inf] are set to 1.0.
If 0 deactivate the display node
Contains either a 3D or a channel display LUT
Contains a channel pre-LUT
LUT output scale factor
LUT output offset
Input color matrix
A scaling value on the output of the channel LUT
Placeholder used for annotation
Name of LUT file to read when RV session is loaded
With 1 size value, the display LUT is a channel LUT of the
specified size, if there are 3 values the display LUT is a 3D LUT
with the dimensions indicated
If non-0 the display LUT is active
The resampled LUT output size
The resampled output LUT
68