Download Fadal - Flint Machine Tools, Inc.

Fadal
SIEMENS CONTROL
Maintenance Manual
2.1.2 Replacing the
E/R Module
Parts Numbers:
ELE-1083 Simodrive E/R Module Int. 16/21KW
ELE-1087 Over Volt Limit Module
Tools Required:
Torx driver set
NOTE:
To remove components for repair or replacement: Follow the assembly
instructions as necessary, in reverse order, until the component has been
disassembled to required level to conduct the repair.
1. Attach the E/R Module (ELE-1083) to the mounting bars with four 1/4-20 x 3/4” torx screws.
Located immediately to the right of the Reactor
Line Filter Assembly.
2. Remove the 8 position terminal block from X181
on the E/R module, plug the Over Volt Module
(ELE-1087) onto the front of the Simodrive Module. Install the 8 position terminal block into the
over voltage module.
ELE-1087
2.1.3 CCU1 Module
Replacement
Parts Numbers:
ELE-1088 CCU box 810D
ELE-1089 CCU1 unit
Tools Required:
Torx driver set
Flat Tip Screwdriver
18
: Control Components: 2.1 Replacement of Modules
Jan 2003