Download WHEELS USER MANUAL

English
CBK
wheel user manual
COMPATIBILITY
CBK wheels are compatible with 11 speed cassettes.A9 or 10 speed cassette may be used with the SRAM 11
speed driver body by installing the included spacer between the hub and the cassette.
Use of colored standard brake pads can cause discoloraton of the rim's braking surface,which is not covered
under warranty
PARTS REPARATION
Your carbon wheels are supplied with valve extensions that correspond to the depth of the rim as follows:
44 mm for
38/44mm wheels
50 mm for
50/60mm wheels
INSTALL VALVE EXTENSIONS
Note: Install valve extensions before mounting tires.
1. Remove the plastic Presta valve cap and metal lockring. Fully unscrew the valve locknut.
2. Starting at the end of the valve, wrap plumber’s tape (PTFE tape) clockwise around the end of the valve so
that the tape extends over both the narrow valve cap threads and the wider valve body. Make sure that the
tape does not stretch over the air opening at the end of the valve.
Note: Plumber’s tape comes in several thicknesses. If thinner tape is used, more than one layer may be
needed to seal the valve properly.
3. Using a 3 mm hex wrench inserted into the valve extension, thread the valve extension onto the end of the
valve and tighten.
Note: Plumber’s tape should be replaced each time the valve extension is removed.