Download 3Com Switch 4210 Configuration Guide
Transcript
Remote-Ping Configuration Example 519 For detailed output description, see the corresponding command manual. SNMP Test Network requirements Both the Remote-Ping client and the SNMP Agent are Switch 4210s. Perform Remote-Ping SNMP tests between the two switches to test the time required from Switch A sends an SNMP query message to Switch B (SNMP Agent) to it receives a response from Switch B. Network diagram Figure 185 Network diagram for the SNMP test IP n etwork 10.1.1.1/8 10.2.2.2/8 Switch A Switch B HWPing Client SNMP Agent Configuration procedure ■ Configure SNMP Agent (Switch B): # Start SNMP agent and set SNMP version to V2C, read-only community name to "public", and read-write community name to "private". <Sysname> [Sysname] [Sysname] [Sysname] [Sysname] n system-view snmp-agent snmp-agent sys-info version v2c snmp-agent community read public snmp-agent community write private ■ The SNMP network management function must be enabled on SNMP agent before it can receive response packets. ■ The SNMPv2c version is used as reference in this example. This configuration may differ if the system uses any other version of SNMP. For details, see SNMP RMON Operation Manual. ■ Configure Remote-Ping Client (Switch A): # Enable the Remote-Ping client. <4210> system-view [4210] Remote-Ping-agent enable # Create a Remote-Ping test group, setting the administrator name to "administrator" and test tag to "snmp". [4210] Remote-Ping administrator snmp # Configure the test type as snmp. [4210-Remote-Ping-administrator-snmp] test-type snmpquery # Configure the destination IP address as 10.2.2.2. [4210-Remote-Ping-administrator-snmp] destination-ip 10.2.2.2 # Configure to make 10 probes per test. [4210-Remote-Ping-administrator-snmp] count 10 # Set the probe timeout time to 30 seconds.
Related documents
3Com Switch 4200G Family Configuration Guide
ZyXEL Communications 288S Network Router User Manual
Switches administrados Ethernet Stratix 5700 Manual del usuario
TaskLink™ for Windows® User Manual UniSystem Programming
Universal Data Mover 3.2.0 User Guide
ProcessView 8 - Manual
Manual Maipu Switch S3026G-PoE-AC
Modular Sensor Interface MSI 60
Rail Switch Power Enhanced (HiOS
Chapter 1 Basic Configuration Commands
Network Management and Monitoring
WGSW-50040 - Modern Alarm Kft.