1
Download Leica GPS900 Technical Reference Manual
Transcript
32 Working with Stakeout 32.1 An Overview of the Program Description Stakeout is a program used to place marks in the field at predetermined points. These predetermined points are the points to be staked. The points to be staked must exist in a job in the internal memory. The points may: • already exist in a job on RX900. • have been uploaded to a job on RX900 using LGO. • have been uploaded from an ASCII file to a job on RX900. A staked point can be manually occupied as a check. Diagram P1 d2 d1 P0 α GPS900_030 Stakeout mode Working with Stakeout P0 P1 d1 d2 Current position Point to be staked Stake out distance Height difference between current position and point to be staked Stake out direction Points are staked in orthogonal mode. GPS900 248
