Download User`s Manual

Because the pressure head must be located equidistant between the two
counterbearings, LIGMASTER™ will ask you to first enter the two counterbearing
locations (usually with A at 20 and C at 420). Once you have entered these numbers
you must check the box on the right to verify the numbers.
Once the A and C values have been entered and verified, the B value will be
automatically calculated for you.
4.9.4 Acquiring Joint Force/response data
Once you have entered and verified the patient positioning data, you are ready to apply
force to the joint and to collect data on the resulting joint response. See section 4.4 on
acquiring test data.
4.9.5 Interpreting the diagnostic data
LigMaster™ User’s Manual - Sport Tech Inc.
Page 36