Download GStarCAD User Manual

GStarCAD 2009 –Fluent Use in Entire Design
Toolbar:
2.2.1 Open a existing drawing
Open an existing drawing
Use one of the following methods:
Pull-down menu: File > Open.
Toolbar:
Command: OPEN or O
Choose the type of file you want to open.
Choose the folder containing the desired file.
Do one of the following:
z
Choose the drawing you want to open, and then click Open.
z
Double-click the drawing you want to open.
If the drawing requires a password, enter the password, click OK to verify the password,
and then click Open again.
2.2.2 Open damaged drawings
Files may be damaged for many reasons. GStarCAD allows you to check and recover
damaged files.
Open a damaged file
Use one of the following methods:
www.staricad.com
19
support @staricad.com