Download Topaz User Manual - Home Controls, Inc.

Navigating the Help
Startup, Log-on, & Navigating
After the TOPAZ software has been properly installed, double-click the TOPAZ icon on the Windows
desktop to startup the TOPAZ program.
After a brief initialization period, the log-on window shown below will appear in the center of your computer
screen.
The Server/Workstation Display
Log-on Window
Following the System initialization, the Workstation Log-on Window fills the monitor.
To log-on to TOPAZ, place the mouse arrow in the box labeled Operator ID, click, and type your Operator
ID. Then move the mouse arrow to the box labeled Password. Click and type your password.
NOTE:
GE Security
If this is a new system you may use the default Operator ID of “master” with
no password. Neither the Operator ID nor the Password is case sensitive. You
may change the default password by following the procedures under the
“Operator” section on page 7-2.
February 2, 2005
1 – 27