Download IP Router User Manual

Basic Configuration
Routing Protocol/Security
Select the protocol remotes will use to authenticate local LocalUnit
<CHAP> - Set authentication to CHAP (Challenge-Handshake Authentication Protocol).
<PAP> - Set authentication to PAP (Password Authentication Protocol).
<NONE> - Disable authentication. Default.
Change the CHAP Secret LocalUnit will send?
Note: this field displays only with a selection on <CHAP>
Selection is: <YES>, <NO>. Below the current Secret Password is listed.
If <YES> is selected, the operator will be requested to enter in a new password, and retype this
password to confirm.
Change the PAP Secret LocalUnit will send?
Note: this field displays only with a selection on <PAP>.
Selection is: <YES>, <NO>. Below the current Secret Password is listed.
If <YES> is selected, the operator will be requested to enter in a new password, and retype this
password to confirm.
Select the authentication User ID
Selection is: <Local Profile Name>, <Local Custom Name>.
<Local Profile Name> Displays the current Local Profile name.
<Local Custom Name> With this selection you will be prompted to enter a Custom name. This
name can be up to 32 characters long.
Select the protocol LocalUnit will use to authenticate all remotes
<CHAP> - Set authentication to CHAP (Challenge-Handshake Authentication Protocol).
<PAP> - Set authentication to PAP (Password Authentication Protocol).
<NONE> - Disable authentication. Default.
6-6
IP Router - Release 2.97