Download Safety Control Unit
Transcript
When not using the start switch (Auto start) Auto start When connecting multiple emergency stop switches in series 24V DC T4 X4 T5 X5 X16 X17 T12 X12 T13 X13 When not detecting the welding of start switch Manual start) Start (Manual NOTE: Applicable safety performance is dependent upon each system configuration. 24V DC S7 X16 X17 When not using some safety inputs 24V DC When detecting the welding of start switch Control start (Control start) 24V DC S7 X16 X17 T0 X0 T1 X1 T2 X2 T3 X3 T4 X4 T5 X5 T12 X12 T13 X13 Note: When using a spring lock type safety switch for a safety input of the SG-ONE, if the solenoid output of SG-ONE is connected to the solenoid power terminal of the safety switch directly, then the start condition cannot be established due to the safety input staying in the OFF state. In this case, connect the switch or other equipment to the solenoid output of SG-ONE, and use the OFF operation of the solenoid for lock control. 5-27