Download Smart Relay Controller User Manual

Wireless RF Option
A wireless receiver option is available for use with compatible RF sensor
transmitters. The following components are included:
•
•
•
•
•
•
•
•
Controller
Power converter: 110VAC or 24VAC (for HVAC)
RF Receiver (310 MHz)
Receiver power cable, 12"
Antenna, quarter wave whip
Mounting bracket for antenna
Coax antenna cable
One or more door/window transmitters
There are two possible receiver models (shown below). Type-A is the original
model and features compact design and direct attachment to the HSRS
controller. (Interface cable is not required for this model.) Type-B is the next
generation receiver that features LED indicator and enhanced reception. This
model requires serial interface cable (included) for connection to the HSRS
controller. Both models include external whip antenna with coax cable.
Receiver
(type-A)
Receiver
(type-B)
Antenna with
coax cable
IMPORTANT: The system is extremely sensitive to RF signals. It is imperative
that other wireless devices are kept far away from the receiver and antenna.
Items including cell phones, wi-fi routers, and remotely controlled gadgets can
obstruct or even jam signal reception.
21