Download - Electro Systems Associates

CONTENTS
PAGE
CHAPTER 1 INTRODUCTION
1.1
CHAPTER 2 CONFIGURATION AND INSTALLATION
2.1 Configuration of ESA 86/88-2
2.1.1 Processor selection
2.1.2 Operational mode selection
2.1.3 Printer Enable/Disable
2.1.4 Baud rate selection
2.1.5 Memory selection
2.1.6 Interrupt selection
2.1.7 8087 installation
2.2 Installation of ESA 86/88-2
2.2.1 Installation procedure for Serial mode of operation
2.2.2 No response in Serial mode
2.2.3 Installation procedure for Keyboard mode of operation
2.2.4 No response in Keyboard mode
2.1
2.1
2.1
2.1
2.1
2.2
2.2
2.3
2.3
2.3
2.4
2.4
2.5
2.5
CHAPTER 3 KEYBOARD MONITOR
3.1 Introduction
3.2 General operation
3.3 Monitor Commands
3.4 Examine Byte and Examine Word Commands
3.5 Examine Register command
3.6 Input / Output Commands
3.6.1 Input byte and Input word commands
3.11
3.6.2 Output byte and output word commands
3.7 Step Command
3.8 Go Command
3.9 Move Command
3.10 Use of REG, + and - keys
3.10.1 Use of “+” key
3.10.2 Use of “-” key
3.10.3 Use of "REG" key
3.11 User programmable function keys
3.1
3.1
3.1
3.2
3.5
3.9
3.11
CHAPTER 4 SERIAL MONITOR
4.1 Introduction
4.2 General operation
4.3 Structure of monitor commands
4.3.1 Parameter entry
4.3.2 Use of +,- operators and register, in specification of Parameters
4.3.3 Response to Errors
4.4 Monitor commands
4.4.1 Substitute Memory commands
4.4.2 Display memory commands
4.4.3 Examine/modify Register command
4.4.4 Move command
4.4.5 Input Byte and Input word commands
4.1
4.1
4.1
4.2
4.2
4.2
4.3
4.3
4.5
4.6
4.7
4.8
4.10
ESA 86/88-2 User’s Manual
3.12
3.14
3.15
3.16
3.19
3.19
3.19
3.20
3.21