Download Outdooree R8

higher the sensitivity the easier the camera
triggers.
a. If you are already in the “MENU” skip to
step “d”
b. With batteries and SD card installed and
the camera in the OFF position; slide the
power switch to the “SETUP” position.
c. Press the MENU button
d. Press the LEFT arrow button until
“Sensor Level” appears at the top of the
screen.
e. Use the “UP” and “DOWN” arrows to
select “Low”, “Normal” or “High”.
f. Press “OK” to save setting. Note that the
blue checkmark will move to the selected
setting
g. If you need to make additional changes,
proceed to those steps now. If you are
done making the changes you want,
press “MENU” and turn the camera off
until you are ready to put the camera into
action.
21