Download Sign Command User Manual

Sign Command User Manual
Activating the Software
In order to prevent unauthorized use of the software, each installation of Sign Command requires a
unique activation code. This security measure helps to ensure that your display cannot be changed by a
third party.
When first opening an unregistered version of
Sign Command, the software activation
window will appear. Copy the PC Code into
your computer’s clipboard by highlighting it
and pressing Ctrl+C, or write it down.
Go to:
stewartsigns.com/support/tekstar-activation
and complete the required form for software
activation. When prompted for your PC code,
press Ctrl+V on your keyboard to paste it into
the field, or type it in.
Software Activation Window
A unique activation code will be shown
immediately upon registration. Copy and
paste this code, or type it, into the
Activation Code field. Click the OK button to
continue.
If the activation code is correct, the main
Sign Command screen will appear. If the
Activation Code is invalid, please doublecheck the PC Code used and Activation Code
entered.
Enter the activation code and click OK.
A unique activation code is required for each computer that will have Sign Command
installed. Repeat this registration process for each computer if installing in multiple locations.
©Stewart Signs
Document revision 8/26/2012
Page 7