Download Warning！ - Nettosolenergi.com













6.4.2 Connect Inverter to Grid
1、Connecting of the wire of the Connector:
Please connect the wire of the AC Connector according to the following
steps:
Operation Instruction




















Operation Demonstration
Step 1: Using the straight
screwdriver to separate
the connector jacket and
the wire body.




Step 2: Losing the
fastening nut at the jacket
bottom.


Step 3: Strip off the
insulation from the 3
wires: L, N, GND. The
length of stripped
insulation is approximate
7mm. Plug the wire
through nut and
intermediate leave.
Step 4: Plug the L, N
wires into the L, N holes
in the connector, the GND
into the hole with
mark”
”, and then
tighten the screws.
Remember the colors
corresponding to different
wires.







22