Download Installing TERM Professional

Transferring Files
Table 2 Transfer Status Dialog Box Fields
(continued)
Field
Function
Effective Baud Rate
This field displays the effective disk-to-disk file transfer
speed currently in process. When data compression is in use
(if you are using WTERMCRC), the value may exceed the
modem baud rate. The effective rate is calculated by
dividing the bytes transferred by the elapsed transfer time.
Transfer rates may be fine tuned using the HIWAIT script
command.
Number of Packets
This field displays the number of file data packets
transferred thus far over the communications line.
Restarts/Retries
This field displays both the number of times this transfer
has been restarted, followed by the number of bad packets
in the current file transfer.
Last Error
This field displays the last critical error message from either
the local or the remote system. Messages displayed here are
deemed critical, and not merely information. If more than
ten bad packets are sent in sequence, TinyTERM aborts the
file transfer and prints the message Transfer aborted. n files
transferred, where n is the number of files successfully
transferred.
Last Message
This field displays the last information message from the
local or remote system. These messages are mostly useful
for interactive progress, but are also logged, and can be
used for debugging.
To abort a transfer
At any time during a transfer you may abort it by pressing
Ctrl+C.
To exit from file transfers
When a transfer is complete, the Last message field displays "
Press ENTER to exit the transfer status screen.
n files transferred."
75