Download Installing TERM Professional

Network Connections
Communication Method
Determining the Communication Method
The Century program group contains a Network Switcher icon that states which
communication method is currently used. The icon will be switched to the
communication method currently selected.
1.
Double-click the Network Switcher icon. A dialog displays showing the
current network communication method and asking if the configuration
should be switched.
2.
Click YES to change the communication method. A dialog displays stating
that the change will take effect after Windows is restarted.
3.
Choose one of the following selections:
Click YES to restart Windows immediately.
Click NO if other applications need to be closed prior to restarting
Windows. Any open applications should be closed, then Windows should
be terminated and restarted.
The first time the communication switch is changed to serial port/modem, the
Century TCP
dialer will also need to be configured (does not apply to Windows 95 users). See the
Setting up
the Dialer in section in this manual.
Troubleshooting Network Connections
If a problem is encountered while connecting to the network, always check the
Network Status Line at the bottom right of the screen to see if the network is active
(UP) or inactive (DN).
This section describes some common problems and presents some suggestions for
troubleshooting. Find the description below that best matches the problem and try
the corresponding solutions.
141