Download FOR NETWARE

CD Install Guide Page 6 Monday, October 28, 1996 3:14 PM
You can install the Backup Exec server software from:
•
the CD mounted as a NetWare volume (see “To install
Backup Exec using a server-based CD ROM drive:” on
page 7).
•
a Windows workstation equipped with a CD-ROM device
(see Installation Steps (Windows workstation-based) on
page 3–12).
•
a workstation equipped with a CD-ROM device where the
installation files can then be copied and run at the file server
(see “To copy the installation files from a workstation
equipped with a CD-ROM drive to the file server:” on
page 7).
•
installation diskettes which can be created on a workstation
equipped with a CD-ROM drive. Once the installation
diskettes are created, the diskettes can be used to install the
software on the fileserver (see “To create Backup Exec
installation diskettes from a DOS or Windows workstation
equipped with a CD-ROM drive:” on page 9).
Note
For server-based installations, if you are using a
monochrome monitor enter a /m command line
parameter following the installation command. For
example:
load seagate:netware\beinstl /m
6