Download File

Command Sections
4.2.2
Set Sensor Format
Set format of sensor. The [standard] format uses only effective pixels, while the
[alternative] format shows all pixels inclusive effective, dark, reference and
dummy.
a.) Command Message:
Code
Length Format
Cks.
0x1511 0x0007 0x####
0x##
Parameter:
x0000 = [standard]
x0001 = [alternative]
Note: This command will be rejected, if Recording State is [run].
b.) Response Message:
Code
Length Format
Cks.
0x1591 0x0007 0x####
0x##
Return
values:
x0000 = [standard]
x0001 = [alternative]
c.) Failure / Warning Response Message:
Code
Length Message
0x15D1 0x0009 0x########
Return
values:
Cks.
0x##
error code, less than 0 (see also section 5. Error / Warning Codes)
pco.edge Low Level Description V1.01 © PCO AG, Germany
33