1
Download Introduction - Direct Source Surplus
Transcript
Button Description Click this button to move the stage to the auxiliary chuck. Note that this button will not be present on Alessi 6100-series stations. Click this button to move the stage to the auxiliary chuck. Note that this button will not be present on Alessi 6100-series stations. Click this button to move to the location of the reference die. POSITION SETTINGS You can make adjustments to a position by right-clicking over any button in the left column of the Motion Control window and selecting “Change Settings.” This action brings up the Position Settings window (figure 13). The following is an example of right-clicking over the AUX 1 (auxiliary chuck) button. Figure 13. Positions Setting dialog. MODE SETTINGS The mode for the Motion Control window is set from the mode list. Figure 14. Mode list. 20 • Nucleus 2.7 User’s Guide
