Download CIMPLICITY HMI Routing Control Objects Operation Manual

Configure a Profile
In order to configure a new profile or to edit an existing profile, you must use the
/config switch on the command line of the Run dialog box or the RCO Runtime UI
Properties dialog box. When the RCO Runtime UI is accessed using this switch, the
Configure option on the File menu is enabled allowing configuration of a new or existing
profile. See "Option 4: Connect to Configuration Dialog" for complete instructions.
To configure a profile:
1.
Do one of the following:
Method 1 – File menu
A. Click File on the menu bar.
B. Select Configure.
Method 2 – Toolbar button
Click
on the toolbar..
Result: Using either method, the Profile file dialog box will display showing the list of
configured sites for the local project, or for the profile opened when accessing the RCO
Runtime UI—see figure.
4-15
2.
(Optional) Perform a number of functions from the Profile file dialog box to
configure an RCO profile. Proceed as follows:
3.
Click Sites tab.
CIMPLICITY HMI Routing Control Objects Operation Manual–July 2001
GFK-1408C