Download CardioView

12
CHAPTER 4 - Working with CardioView
6. The patient’s ECG will appear on the screen.
7. After 10 seconds of ECG has been received, the status bar will be filled. This
means that sufficient data has been received for CardioView to analyze.
8. Press the ‘Save’ button to transfer the
most recent 10 seconds of ECG to
CardioView. This can be done multiple
times (32 maximum) with the number of
saves appearing above the ‘Save’
button. The most recent 10 seconds will
be
displayed
in CardioView.
or
Press the ‘PAUSE’ button to review up
to 15 minutes of ECG.
9. Use the scroll bar at the bottom of the
screen to identify the 10 seconds of
ECG
you wish to transfer to CardioView.
If a
suitable ECG is not found you can
return to the ECG recording by pressing
the
‘RECORD’ button. This will start a
fresh
recording. Pressing the ‘Save’
button will
transfer the selected 10
seconds to
CardioView.
10. If you wish to print more than 10
seconds
of the ECG, press the Print
button. Selecting ‘All’ will print the entire
recording,
selecting ‘Pages’ allows you to identify
which pages you wish to print with page 1
being from the start of the recording, and
selecting ‘Selection’ will print the current
view.
11.
To exit and view the ECG, press the button located in the top r
corner of the screen.
Note: The ECG will only be analyzed if the Analyze ECG option is check
General Options.