1
Download DIGITAL PRESSURE CONTROLLER
Transcript
5.4.3 ANSI/IEEE 488.2-1987 COMMAND SUMMARY *CLS *ESE? *ESE <number> *ESR? *IDN? *OPC? *OPC *RST *SRE? *SRE <number> *STB? *TST? *WAI Clear Status Event Status Enable Query Event Status Enable Event Status Register Identification Operation Complete Query (Returns 1) Operation Complete Reset Service Request Enable Query Service Request Enable Status Byte Query Self-Test Query Wait (No operation) 5.4.4 SCPI COMMAND SUMMARY The current value associated with a SCPI command may be read by appending a question mark to the command. For example CALC:LIM:UPP? will return the current upper pressure limit. MEASure [:PRESsure]? :SLEW? :PRESsure2? :PRESsure12? :PRESsure22? :PRESsure32? :PRESsure42? :PRESsure52? :PRESsure3? :PRESsure4? :PRESsure14? :PRESsure24? :PRESsure5? :PRESsure15? :PRESsure25? :PRESsure35? :PRESsure45? :PRESsure55? :VACuum? :VACuum11? :VACuum21? :VACuum31? :VACuum41? :VACuum51? :TEMPerature? :TEMPerature11? REMOTE OPERATION Main Pressure Main Slew Rate Sensor A Case Reference Sensor B Case Reference Sensor C Case Reference Sensor D Case Reference Sensor E Case Reference Sensor F Case Reference Sensor RPT Controller A PDCR Controller B PDCR Controller C PDCR Sensor A Sensor B Sensor C Sensor D Sensor E Sensor F Sensor A Vacuum Sensor B Vacuum Sensor C Vacuum Sensor D Vacuum Sensor E Vacuum Sensor F Vacuum Sensor A Gas Temperature Sensor B Gas Temperature 5-4
