Download DIGITAL PRESSURE CONTROLLER

MENU | TEST | SHOP1 – MENU
4.6.4.5 Menu | Test – Control
The Menu | Test | Control menu of the system is used to tune the controller. On new
instruments, the controller is tuned at the factory and therefore, the user should not need
to access or make any adjustments to the controller using this menu. This menu is user
accessible in order to provide a means to set-up the controller when control valves are
replaced or to perform maintenance on the controller. This menu is primarily used for
diagnostics and repair and will be discussed further in the Maintenance Section 6.0.
MENU | TEST | CONTROLLER – MENU
4.6.5 MENU | DISPLAY
The Menu | Display is used to conveniently monitor most of the sensor output
parameters. It is primarily used for troubleshooting.
This display screen shows all
available sensor readings from both channels.
4-29
LOCAL OPERATION