Download MICROMASTER 440
Transcript
Issue B1 P1759[3] Parameters 50 100 2000 Level: Min: Def: Max: 0.0 0.2 2.5 Level: Min: Def: Max: 1.0 4.0 200.0 Level: Min: Def: Max: - Level: Unit: Hz Min: Def: Max: - Level: Unit: Hz Min: Def: Max: - Level: Unit: ° T(wait) for n-adaption to settle CStat: CUT P-Group: CONTROL Datatype: U16 Active: Immediately Unit: ms QuickComm. No Min: Def: Max: 4 Sets waiting time while transition is done from open-loop to close-loop operation Index: P1759[0] : 1st. Drive data set (DDS) P1759[1] : 2nd. Drive data set (DDS) P1759[2] : 3rd. Drive data set (DDS) P1764[3] Kp of n-adaption (SLVC) CStat: CUT P-Group: CONTROL Datatype: Float Active: Immediately Unit: QuickComm. No 4 Enters gain of speed adaptation controller for sensorless vector control. Index: P1764[0] : 1st. Drive data set (DDS) P1764[1] : 2nd. Drive data set (DDS) P1764[2] : 3rd. Drive data set (DDS) P1767[3] Tn of n-adaption (SLVC) CStat: CUT P-Group: CONTROL Datatype: Float Active: Immediately Unit: ms QuickComm. No 4 Enters speed adaptation controller integral time. Index: P1767[0] : 1st. Drive data set (DDS) P1767[1] : 2nd. Drive data set (DDS) P1767[2] : 3rd. Drive data set (DDS) r1770 CO: Prop. output of n-adaption Datatype: Float P-Group: CONTROL 3 Displays integral part of speed adaptation controller. r1771 CO: Int. output of n-adaption Datatype: Float P-Group: CONTROL 3 Displays integral part of speed adaptation controller. r1778 CO: Flux angle difference Datatype: Float P-Group: CONTROL P1780[3] 4 Displays flux angle difference between motor model and current transformation before motor model is active. Level: Control word of Rs/Rr-adaption Min: 0 CStat: CUT Datatype: U16 Unit: Def: 3 P-Group: CONTROL Active: first confirm QuickComm. No Max: 3 3 Enables thermal adaptation of stator and rotor resistance to reduce torque errors in speed/torque regulation with speed sensor, or speed errors in speed/torque regulation without speed sensor. Bitfields: Bit00 Enable thermal Rs/Rr-adapt. 0 NO 1 YES Bit01 Enable observer Rs/Xm-adapt. 0 NO 1 YES Index: P1780[0] : 1st. Drive data set (DDS) P1780[1] : 2nd. Drive data set (DDS) P1780[2] : 3rd. Drive data set (DDS) Note: Only stator resistance adaptation is carried out for synchronous motors. Level: P1781[3] Tn of Rs-adaption Min: 10 CStat: CUT Datatype: U16 Unit: ms Def: 100 P-Group: CONTROL Active: Immediately QuickComm. No Max: 2000 4 Enters Rs-adaptation controller integral time. Index: P1781[0] : 1st. Drive data set (DDS) P1781[1] : 2nd. Drive data set (DDS) P1781[2] : 3rd. Drive data set (DDS) MICROMASTER 440 Parameter List 6SE6400-5BB00-0BP0 109