Download Proban - DNV GL
Transcript
Proban SESAM 3-16 01-OCT-2004 Program version 4.4 Calculating importance factors FORM SORM FORM SORM Reliability index: Reliability index: Probability: Probability: 2.4915 2.4699 6.36053E-03 6.75823E-03 Starting linearization of: Single event: C Linearization completed Calculating importance factors FORM SORM FORM SORM Reliability index: Reliability index: Probability: Probability: Lower Upper Lower Upper bound bound bound bound on on on on 2.9483 2.9262 1.59742E-03 1.71569E-03 Reliability index: Reliability index: Probability: Probability: 2.3261 2.3347 9.77831E-03 1.00065E-02 This analysis provides bounds instead of a direct probability, because of the geometry of the limit state surface in U-space. The system event is a union of events, with at least one intersection between the subevents. The only way Proban can treat this using FORM/SORM is to analyse each subevent by itself, and then use these results to bound the probability of the union event. A union of single events may also be analysed using the bounding technique. Use the command DEFINE FORM/SORM BOUNDS ON to achieve this. The first questions in Example 3.1 can now be answered. Using SORM, the probability of failure is about 0.01, corresponding to a reliability index of about 2.33. The effect of removing the redundancy in component A is to increase the failure probability to about 0.028, corresponding to a reliability index of about 1.9. A print of the summary results and of all results yield, in addition to the bounds and the summary result for each of the subevents, a list of intersection probabilities: Subevent Intersection Probabilities: Subi Subj Probability Subi Subj Probability Subi Subj Probability -------------------------------------------------------------------1 1 2.35961E-03 2 1 5.69582E-04 2 2 6.75823E-03 3 1 2.28220E-04 3 2 2.57420E-04 3 3 1.71569E-03 The intersection probabilities are used to calculate the probability bounds. They are probabilities of the intersections between pairs of the subevents.