1
Download CubeSuite+ V2.02.00 User`s Manual: RX Build
Transcript
CubeSuite+ V2.02.00
B. COMMAND REFERENCE
-patch
< Assembler Command Options / Microcontroller Options >
[Format]
-patch = { rx610 }
[Description]
- This option is used to avoid a problem specific to the CPU type.
- When -patch=rx610 is specified, the MVTIPL instruction which causes a problem in the RX610 Group is handled as
an undefined instruction. The MVTIPL instruction will not be recognized as an instruction and the error message
E0552113 will be output.
- This option is equivalent to the following property in CubeSuite+.
- From the [Common Options] tab, [Avoids a problem specific to the CPU type] in the [CPU] category
R20UT2998EJ0100 Rev.1.00
May. 20, 2014
Page 495 of 596
