Transcript
SETTING THE TIDE FUNCTION - central hand DEL MAR Emtech La Costa Co. 1 ) Press button B for 3 seconds , release when `beep` , www.delmarwatches.com 2 ) Press B again to set the state of the local tide. now you enter the tide setting mode * Continuous pressing on B enables rapid setting to be performed. Tide Watch User Manual * After 3 seconds without pressing on B, a beep indicates calibre: ISA 8272 push button B exit from setting mode. The tide cycle takes place over one revolution of the dial in 12 hours 25 minutes and 14 seconds. High tide corresponds to the "12 o'clock" position and low tide corresponds to the opposite position, hence "6 o'clock". Battery Life Notification P. 1 DEL MAR P. 5 SETTING THE TIDE FUNCTION - central hand Emtech La Costa Co. 1 ) Press button B for 3 seconds , release when `beep` , www.delmarwatches.com 2 ) Press B again to set the state of the local tide. now you enter the tide setting mode * Continuous pressing on B enables rapid setting to be Tide Watch User Manual performed. Note for Del Mar Tide Watch Small second hand Minute hand Tide amplitude and Moon phase counter calibre: ISA 8272 * After 3 seconds without pressing on B, a beep indicates A Pushbutton : Tide amplitude and Moon phase setting The Del Mar Tide exit Watch fromapproximates setting mode. the tides based push button B The tide cycle takes one revolution of the dial in on average intervals and place lunarover cycles. hours 25 minutes andindicated 14 seconds. Local tides can12 vary from the levels onHigh the tide corresponds to in thecertain "12 o'clock" position andWest low tide corresponds to the display especially portions of the Coast Crown Hour hand 1 2 opposite hence "6 o'clock". of Florida that don'tposition, have two tides per day. 3 Battery Life Notification For customer guidance in Tide predictions, B Pushbutton : Tide cycle setting we recommend using this updated web site: SETTING THE TIDE FUNCTION - central hand http://www.tidesandcurrents.noaa.gov/curr_pred.html Tide cycle counter DEL MAR Tide cycle hand Emtech La Costa Co. 1 ) Press button B for 3 seconds , release when `beep` , The Del Mar Tide watch should never be used for navigation. now you enter the tide setting mode Date window P. 2 www.delmarwatches.com Tide Watch User Manual Minute hand calibre: ISA 8272 A CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM. Crown Time setting 1 ) Unscrew and pull1 crown out3 to Position 3. Life 2 Battery 2 ) Turn the crown to set theNotification correct time. *if hour hand passed 12:00 and B : date change Pushbutton Tideam, cycleotherwise setting it is midnight 12:00 it is noon Tide cycle counter 1 2 3 12:00 pm. DEL Tide cycle hand 3 ) Push crown back to Position 1 and screw in. Emtech La Costa Co. Date window MAR Date setting www.delmarwatches.com 1 ) Unscrew and pull the crown out ** After setting time, alway screw back the crown by hand tightly to position 2. to keep the watch water resistant. Small second hand 2 ) Turn the crown clockwise to set the date . Tide Watch User Manual 3 ) Push crown back toMinute hand Position 1 and screw in. Tide amplitude and Moon phase counter Hour hand calibre: ISA 8272 A Hour hand P. 3 Water resistant Suitable for normal 200m Scuba Diving * Continuous pressingYES on B enables rapid setting to be * After 3 seconds without pressing on B, a beep indicates The Del Mar Tide exit Watch fromapproximates setting mode. the tides based push button B The tide cycle takes one revolution of the dial in on average intervals and place lunarover cycles. P. 7 • When the watch is under 12 water or 25 wet, never and use14 theseconds. pushers/bezels, or set hours minutes Local tides can vary from the levels indicated onHigh the tide corresponds the time. Watch case and metal bracelet should be rinsed thoroughly in fresh to the "12 o'clock" position and low tide corresponds to the display especially in certain portions of the West Coast water after being in salt water. opposite position, hence "6 o'clock". of Florida that don't have two tides per day. • No backward hand, or date, adjustments should not be made when the hands read between 9:00pm and 12:30am. At these times, the gears are too close For customer guidance in Tide predictions, together and such Characteristics : a change could cause damage. we recommend using updated web •Tide No hot tub/sauna. Please do not take this your Del Mar watchsite: into the Hot Tub or analogical / electronic movement. Rotating stepping motors. SETTING THE TIDE FUNCTION - central handheat and water may cause your watch to Date, quick date correction. Sauna. The combination of extreme http://www.tidesandcurrents.noaa.gov/curr_pred.html Small step perresistance. second. lose second, some of1its water 1 ) Press button B for 3 seconds , release when `beep` , Notification end of battery life (EOL): indication by small second hand at 2:00 The Del Indication Mar Tide watch should never be used for navigation. Water related use now you enter the tide setting mode jumping 4 successive steps every 4 seconds. Caseback Water resistant Scuba Depth Indication of the tide state, semi-diurnal. 2 ) Press B again to set the state of the local tide. marking characteristics Diving Suitable for normal Tide : The sweep hand makes 200 center meters/650 feet 200m1 revolution in 12 hours 25 minutes 14 seconds. Scuba Diving * Continuous pressingYES on B enables rapid setting to be Tide amplitude: The small counter hand makes 1 revolution in 29 days 12 hours 44 500 meters/1650 feet 500m YES Suitable for Deep Diving minutes. performed. 1000 meters/3300 feet Suitable for Deep Diving 1000m YES Movement : SWISS MADE * ISA 8272 After 3 seconds without pressing on B, a beep indicates Operating temperature : 0Watch °C --- 50 °C The Del Mar Tide exit fromapproximates setting mode. the tides based SERVICE Accuracy push : ± button 0.5 sec/day/25 °C B Emtech La Costa Co. cycle takes one revolution of the dial in on/ average intervals and place lunarover cycles. Battery : SR927SW 395 The tide Del Mar service dept. •Battery When the watch is under water or 25 wet, never and use14 theseconds. pushers/bezels, or set lifeLocal : approx. 39 months 12 hours minutes High tideState corresponds 1320 Rt 9 #26 tides can vary from the levels indicated on the Note for Del Mar Tide Watch Tide amplitude and Moon phase setting Notification Scuba 500m YES Suitable for Deep Diving performed. Note for Del Mar Tide Watch Suitable for Deep Diving 1000m YES 1000 meters/3300 feet * After 3 seconds without pressing on A, a beep indicates exit from setting mode. Pushbutton A : Crown Time setting 1 ) Unscrew and pull1 crown out3 to Position 3. Life 2 Battery Caseback 2 ) Press B again to set the state of the local tide. marking characteristics Diving 200 meters/650 feet Crown Time setting 1 ) Unscrew and pull1 crown out3 to Position 3. Life 2 Battery 2 ) Turn the crown to set theNotification correct time. push button SETTING THE TIDE AMPLITUDE (MOON PHASES) COUNTER AT12:00 10 O’CLOCK *if hour -hand passed and B : date change Pushbutton Tideam, cycleotherwise setting it is midnight 12:00 it is noon The tide amplitude counter performs one revolution Tide cycle counter 1 2 3 12:00 pm. in 29 days 12 hours and 44 minutes. push button DEL A Costa Tide1cycle hand 3 button ) Push crown to Position 1 and screw in. ) Press A for 3back seconds Emtech La Co. Date window , release when `beep` , MAR setting nowDate you are enter the MOON PHASES setting mode www.delmarwatches.com andthe pull the crown out ** After setting time, alway screw 2 ) Press1 A) Unscrew again to set tide amplitude corresponding back the crown by hand tightly to position to the moon phase.2. to keep the watch water resistant. Small second hand 2 ) Turn the crown to set the date * Continuous pressing on Aclockwise enables rapid setting to be. Tide Watch User Manualperformed. hand 3 ) Push crown back toMinute Position 1 and screw in. Tide amplitude and Moon phase counter Comment : The moon phases hand will start with its setting time, CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM. jumps step forward every 24 hours. B 500 meters/1650 feet Hour hand SETTING THE TIME AND THE DATE push button The tide cycle takes one revolution of the dial in on average intervals and place lunarover cycles. • When the watch is under 12 water or 25 wet, never and use14 theseconds. pushers/bezels, or set hours minutes Local tides can vary from the levels indicated onHigh the tide corresponds the time. Watch case and metal bracelet should be rinsed thoroughly in fresh to the "12 o'clock" position and low tide corresponds to the display especially in certain portions of the West Coast water after being in salt water. opposite position, hence "6 o'clock". of Florida that don't have two tides per day. • No backward hand, or date, adjustments should not be made when the hands read between 9:00pm and 12:30am. At these times, the gears are too close For customer guidance in damage. Tide predictions, together and such a change could cause we recommend using • No hot tub/sauna. Please do not take this yourupdated Del Mar web watchsite: into the Hot Tub or SETTING THE TIDE - central handheat and water may cause your watch to Sauna. The FUNCTION combination of extreme http://www.tidesandcurrents.noaa.gov/curr_pred.html lose some of its water resistance. 1 ) Press button B for 3 seconds , release when `beep` , Depth CAUTION: NEVER CORRECT DATE BETWEEN 9:00 PM AND 12:30 AM. calibre: ISA 8272 The Del Mar Tide exit Watch fromapproximates setting mode. the tides based The Del Indication Mar Tide watch should never be used for navigation. related use now you enter the tide Water setting mode Pushbutton : Tide amplitude and Moon phase setting SETTING THE TIME AND THE DATE P. 6 * After 3 seconds without pressing on B, a beep indicates Pushbutton : Tide amplitude and Moon phase setting SETTING THE TIME AND THE DATE * Continuous pressing on B enables rapid setting to be performed. Note for Del Mar Tide Watch Small second hand Tide amplitude and Moon phase counter 2 ) Press B again to set the state of the local tide. P. 4 the time. Watch case and metal bracelet should be rinsed thoroughly in fresh12919 Champlain, to in thecertain "12 o'clock" position andWest low tide correspondsNY to the display especially portions of the Coast water after being in salt water. opposite position, hence "6 o'clock". of Florida that don't have two tides per day. • No backward hand, or date, adjustments should not be made when the hands read between 9:00pm and 12:30am. At these times, the gears are too close P. 8