Download Phoenix RSM

Data Management
321
Create a new entry for a Vault, Media Name, or Storage Pool - From the Vault, Media Name,
or Storage Pool drop-down list, select <new entry>. The Enter New Name window appears for you
to type a new name. Click OK and the new entry appears in the field's drop-down list.
This method is recommended only for special circumstances. If a job is run with a Vault or media
that is not actually running in the Information Repository, the job fails.
The <any> item in the drop-down list also acts as a divider between Vault, media, and storage pools
implemented and those not implemented. Names above <any> are the ones running in your Information
Repository, and the names below <any> are entered but do not yet have hardware implemented in the
Information Repository. These are not saved if not selected when saving the policy.
The limitations to adding a new name for a Vault, Media Name, or Storage Pool are:
Typing a new name for the Vault, Media Name and Storage Pool options are limited to <any> and
<new entry>.
New entries in Media Name or Storage Pool do not limit options in the remaining fields.
Wildcard additions (for example, Ac*), appear beneath <any>. See Wildcards.
Data Service Policy Destination Tab Elements
Element
Vault
Description
From the drop-down list select a Vault, or select <new
entry> to add a new Vault name.
If a Vault is selected, the Media Name drop-down is
automatically populated with the media on the given Vault.
If a new entry is given, then the Media Name and Storage
Pool options are limited to <any> or <unnamed> and <new
entry>.
Media Name
Media Name refers to the names of individual units of media
in the Vaults within the Information Repository.
From the drop-down list select the media, or select <new
entry> to add a new media name. The system automatically
looks for any storage pools comprised of the selected
media. If it cannot find any, then the Storage Pool drop-down
list displays <any>.
Storage Pool
© 2015
Storage pools are groupings of media on a single policy
used for a particular purpose. For example, if you had a
policy called "Night backup" and it wrote to several units of
media, you would use a "Night backup" storage pool and
assign to it every unit of media to use for that purpose. For
more information see Prepare Media, Storage Pool.