Download - D-Link

xStack® DES-3528/DES-3552 Series Layer 2 Fast Ethernet Switch CLI Reference Manual
Access Profile ID: 1
Type : IP
==============================================================================
MASK Option :
VLAN
Source IP Mask Dst. IP Mask
DSCP ICMP Type Code
20.0.0.0
10.0.0.0
----------- --------------- --------------- ---- ---------------------------------------------------------------------------------------------Access ID : 1
Mode: Deny
Ports: 1
----------- --------------- --------------- ---- -----default
20.0.0.0
10.0.0.0
3
----11
-----32
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
enable cpu_interface_filtering
Purpose
Used to enable CPU interface filtering on the Switch.
Syntax
enable cpu_interface_filtering
Description
This command is used, in conjunction with the disable cpu_interface_filtering command
below, to enable and disable CPU interface filtering on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example Usage:
To enable CPU interface filtering:
DES-3528:5#enable cpu_interface_filtering
Command: enable cpu_interface_filtering
Success.
DES-3528:5#
disable cpu_interface_filtering
Purpose
Used to disable CPU interface filtering on the Switch.
Syntax
disable cpu_interface_filtering
Description
This command is used, in conjunction with the enable cpu_interface_filtering command
above, to enable and disable CPU interface filtering on the Switch.
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example Usage:
To disable CPU filtering:
DES-3528:5#disable cpu_interface_filtering
Command: disable cpu_interface_filtering
Success.
DES-3528:5#
config flow_meter
Purpose
Used to configure packet flow-based metering based on an access profile and rule.
258