Download RTMD Users Guide
Transcript
(Equation 2-4) is the basic set of equations of motion that the testing methods at the RTMD earthquake simulation facility are based upon. More complicated structures can be tested at the RTMD earthquake simulation facility than the one shown in Figure 2-1, including structures with rate-dependent components (e.g., semi-active MR dampers), multi-directional earthquake loading and geometric and material nonlinearities. Figure 2-2 Conventional PSD test method scheme 2.2 PSD Test Method The PSD test method overcomes the limitations of size and mass of a test structure present in a shaking table test by using the equipment similar to that for performing quasi-static testing (real-time PSD testing would however require dynamic actuators and a control system). In the PSD method of testing, the equations of motion for the structure (i.e., (Equation 2-4)) are solved using either an explicit or implicit direct step-by-step integration method to obtain the response of the structure. The mass matrix , viscous damping matrix , and the excitation history are